ICC ICRESAM25C User manual

Video Amplifier Module
ICC’s Video Amplifier Module provides one coaxial input with one or four coaxial outputs to enhance the signal strength.
Video Amplifier Module
INSTALLATION INSTRUCTIONS
Residential Cabling Solutions
ASSEMBLY INSTRUCTIONS
CUSTOMER CARE / TECHNICAL SUPPORT • [email protected] / 888-275-4422 (ASK-4-ICC)
© Copyright 2008, ICC.ICC and ICC logo are registered trade name and trademark. All rights reserved. MSR-0411-1 REV A
1x4 Video Drop Amplifier, 1 piece
A
120 VAC Power Supply, 1 piece
B
Bracket, 1 piece
C
Locking Button, 4 pieces
D
ICRESAM25C
ICRESAM18C
INCLUDES:
A
Step 1.
1. Place module horizontally or vertically and align
locking buttons with the enclosures peg board.
Make sure the locking buttons are NOTin locked
positions.
Step 3.
3. Verify parts against the parts list.
Step 2.
2. Verify parts against the parts list.
Locking Button (4x) Enclosure
Bracket
B
C
D

Step 4.
OR OR
coaxial cable
Coaxial Cable
Splitter (ICRESAV42C)
Video Amplifier Module
Video Amplifier - ICRESAM25C
120V AC Adapter
18 dB 4-Port Video Amplifier - ICRESAM18C
(Also Available)
4. To setup the Video Amplifier, connect the DC power to the appropriate power source. Connect the video source to the “INPUT” port and the
amplified signal will be at the “OUTPUT” port of the video amplifier. Connect the output port to a video device, such as TV’s, or the input of the
Video Splitter Module for distributing throughout the home. Tune the gain adjustable knob to obtain the best possible reception. The FM trap is used
to eliminate the un-desired FM interference.
NOTE: Remember to amplify the signal before splitting to other video devices.
ASSEMBLY INSTRUCTIONS