NEC NC1200C User manual

www.necdisplay.com
Digital Cinema Projectors
Digital Cinema Projector Series
NC3200S, NC2000C and NC1200C projectors
Using DLP Cinema® technology from Texas Instruments®, NEC’s improved
digital cinema projectors deliver exceptional image quality, brightness,
resolution, contrast and colorimetry. NEC’s award-winning digital cinema
projectors are designed with a focus on quality and ease-of-use for movie
theatres of all sizes: NC3200S for the largest cinema screens (up to 105-feet
wide*); NC2000C for medium-sized screens (up to 65-feet wide*); and NC1200C
for small theatres, screening rooms and post-production facilities with screen
sizes up to 46-feet wide*. Together with the new, optional integrated NEC
2K/4K Media Block and NEC Local Storage Server**, they provide complete and
compelling industry solutions for showing digital movies.
FULLY COMPLIANT WITH DCI REQUIREMENTS*** / 4K-READY
• The NC3200S, which was designed with the exhibitor in mind, is fully upgradable to 4K
technology when available, making the transition a seamless and cost-effective solution
INDUSTRY-LEADING MEDIA BLOCK - ONE-STOP SOLUTION
• NEC optional 2K/4K Media Block** - Internal design for content management, screen management and higher security,
providing greater peace of mind
• Designed to work with third-party company legacy media blocks and servers
MINIMAL COST OF OWNERSHIP / SIMPLE MAINTENANCE
• Quick and easy components/parts replacement with modular electronics
- Clear electronic layout and wiring
- Easy prism replacement can be completed in only a few minutes
- Truly modular electronics; custom DMD shielding gaskets and patented reflector design help reduce maintenance costs
• Industry-leading system service and support
- Quick and easy troubleshooting by self-diagnosis with built-in system test and error log analisys
- Built-in web server allows you to access and control projectors from any authorized web browser
- Remotely update firmware via network from long distances
BAR-SETTING RELIABILITY
• Newly designed cooling system, the first of its kind in the industry, creates positive air pressure internally to prevent contaminates such as oil and dust
from entering the main chassis. Lamp cooling air flow is separate from the optics and electronics in the main chassis.
• Custom DMD shielding protects the projectors from dust/oil contaminates and provides optimal picture quality
BEST-SUITED PROJECTOR FOR 3D APPLICATIONS
• The NC3200S is the brightest digital cinema projector available, boasting 31,000 lumens
• 3D presentation using a single projector - Support for all major suppliers of 3D accessories, including:
- special 3D control connector
- optional automatic turret to mount polarizers in front of lens when displaying 3D content
UNRIVALED EASE OF USE
• One-Touch Operation and Memory Functions - Direct-select buttons for eight stored projector configurations; simplify display of different aspect ratios
through pre-set lens shift position, zoom and focus, and lamp power settings.
• Auto Lamp Brightness Control - Maintains constant brightness of the lamp by adjusting the lamp power as the lamp ages.
These projectors optimize lamp performance and ensure the brightest and most uniform image possible for the life of the lamp.
• Trouble-Free Lamp Replacement - Maintenance personnel can replace lamps simply from the back of the projector even in a cramped space
• Intuitive keypad layout provides for easy operator control
* Subject to installation conditions. Maximum screen width is under the conditions of 14-ft-L luminance @screen gain 1.8
** NEC optional Media Block and Local Storage Server available late in 2010
*** Digital Cinema System Specifications Compliance test applied for

NEC Display Solutions
500 Park Boulevard, Suite 1100
Itasca, IL 60143
866-NEC-MORE
Recipients of the 2009 Academy Plaque are D. Scott Dewald, Greg Pettitt,
Brad Walker and Bill Werner. DLP Cinema and the DLP Cinema logo are
registered trademarks of Texas Instruments. All other brand or product
names are trademarks or registered trademarks of their respective holders.
Product specifications subject to change. 3/10 ver. 2.
©2010 NEC Display Solutions of America, Inc. All rights reserved.

MODEL NC3200S NC2000C NC1200C
Projection Method 3-chip DMD reflection method
Primary Lenses For 1.25” DLP Chip: 1.25 to 1.45:1 zoom / 1.44
to 2.5:1 zoom / 1.6 to 2.4:1 zoom / 1.8 to 3.0:1
zoom / 2.15 to 3.6:1 zoom / 3.0 to 4.3:1 zoom /
4.3 to 6.0:1 zoom
For 0.98” DLP Chip: 1.3 to 1.75:1 zoom / 1.4 to 2.05:1 zoom / 1.59 to 2.53:1 zoom /
1.9 to 3.25:1 zoom / 2.4 to 3.9:1 zoom / 3.9 to 6.5:1 zoom
Lens Adjustment Functions Motorized focus, zoom, horizontal/vertical shift, light shutter (dowser) / Lens memory stores lens setting (shift/zoom/focus) /
Range of shift is dependent on lens
Light Output 31,000 lumens when using NEC 7.0KW high-
efficiency Xenon lamp bulb
17,000 lumens when using NEC 4.0KW high-
efficiency Xenon lamp bulb
9000 lumens when using 2.0KW high-
efficiency Xenon lamp bulb
Supported Screen Size (maximum) 32m / 105 ft.* 20m / 65 ft.* 14m / 46 ft.*
Contrast Ratio 2200:1 (full on/off)
Lamp Bulbs NEC high-efficiency Xenon (NEC
4.5KW/6KW/7.0KW lamp bulb)
NEC high-efficiency Xenon (NEC 4.0KW lamp
bulb / NEC Long life Xenon (NEC 4.0KW
lamp bulb)
NEC high-efficiency Xenon (2.0KW lamp bulb)
DMD Specifications 1.25” DLP chip, 12º tilt angle
2048 x 1080 pixels
0.98” DLP chip, 12º tilt angle
2048 x 1080 pixels
Cooling Method • Liquid cooling inside, air cooling with dust-
preventing electrostatic filter
• Total thermal dissipation: 35500BTU
• Projector exhaust: Top mounted
• Demand of exhaust duct: 565CFM (16m3/min)
• Liquid cooling inside, air cooling with dust-
preventing electrostatic filter
• Total thermal dissipation: 18800BTU
(Input 4KW power to NEC 4.0KW lamp bulb)
• Projector exhaust: Top mounted
• Demand of exhaust duct: 460CFM (13m3/min)
• Liquid cooling inside, air cooling with dust-
preventing electrostatic filter
• Total thermal dissipation: 10600BTU
• Projector exhaust: Top mounted
• Demand of exhaust dust: 350CFM (10m2/min)
External Controls LAN port [RJ-45] x 1 / USB port [Type A] x 1 / Serial port (RS-232C) [D-sub(9-pin) x 1 / General Purpose I/O [D-sub (37-pin)] x 1 /
General purpose I/O for 3D (D-sub [15-pin] x 1) / Remote control connector x 1
Input Terminals HD-SDI port [BNC] x 4 / DVI port [DVI-digital] x 2
Fan Noise Less than 66dB Less than 62 dB
Power Supply Voltage Projector power supply unit: 100 to 240V AC,
50/60Hz, single phase
Lamp power supply unit: 200 to 230V /
380 to 415V AC, 50/60Hz, 3 phases
C1 Connection**
Projector and Lamp power supply unit:
200 to 240V AC, 50/60Hz, single phase
C2 Connection***
Projector power supply unit: 100 to 240V AC, 50/60Hz,single phase
Lamp power supply unit: 200 to 240V AC, 50/60Hz, single phase
Rated Input Current Projector head: 3.5A
Lamp power supply unit: 16A
C1 Connection**
Projector power + lamp power
30A@200V
C2 Connection***
Projector power: 5A@100V, 2.5A@200V
Lamp power: 27A
C1 Connection**
Projector power + lamp power
19A@200V
C2 Connection***
Projector power: 5A@100V, 2.5A@200V
Lamp power: 14A
Power Consumption Projector head: 700W
Lamp power supply unit: 9700W
Total: 10400W
Projector power supply unit: 500W
Lamp power supply unit: 5000W
Total: 5500W
Projector power supply unit: 500W
Lamp power supply unit: 2600W
Total: 3100W
External Dimensions (W x D x H) Projector head: 27.6 x 44.3 x 19.8 in. /
700 x 1124 x 503mm
Excluding lens, lens hood and exhaust stack
Lamp power supply unit: 23.4 x 15.7 x 17.8 in. /
594 x 398 x 452mm
Excluding lens, lens hood, exhaust stack and
handle. Including feet.
27.6 x 39 x 19.80 in. /
700 x 990 x 503mm
Excluding lens, lens hood and exhaust stack. Including feet.
Weight Projector head: 218 lbs. / 99 kg
Lamp power supply unit: 115 lbs. / 52 kg
Excluding lens and lamp bulb.
218 lbs. / 99 kg
Excluding lens and lamp bulb.
Approx. 203 lbs. / 92 kg
Excluding lens and lamp bulb.
Environment Operational temperatures: 50oF - 95oF / 10oC - 35oC
Humidity: 10% - 85% (non-condensing)
Storage temperatures: 14oF - 122oF / -10oC - 50oC
Humidity: 10% - 85% (non-condensing)
Regulations USA: UL60950 FCC Class A / Canada: CSA60950 ICES-003 Class A /
Europe: EN60950 EN55022 1988. Class A/EN55024-1998/EN61000-3-11/EN61000-3-12 (Marking: TUV-GS, CE) /
Oceania: EN60950 AS/NZS3548 Class A 1995/+A 1/2:1997 / Japan: J60950 VCCI Class A (Marking PSE, S-TUV) /
Asia: EN60950 CISPR Pub22 / Korea: K00022 Class A/K00024/K61000-3-11 (Marking IMC)
Standard Equipment Lens holder to attach to primary lens, user manual User manual
Optional Accessories Wide converter lens and motorized turret, built-in alternative content processor, optional input boards for alternative content processor, air filter,
Internal Media Block (NC-80MB01)****, Local Storage Server (NC-80SS01)****
Limited Warranty 2 years, parts and labor
Specifications for NC3200S/NC2000C/NC1200C
* Subject to installation conditions. Maximum screen size is under the conditions of 14-ft-L @ screen gain 1.8
** When the AC power to the projector power supply and the lamp power supply are provided by a single cable
*** When the AC power to the projector power supply and the lamp power supply are provided by separate cables
**** Available in late 2010
DLP Cinema® Technology
2009 Academy Scientific and Engineering Award
for Color Accuracy