ICOP Technology Vega86-6247 User manual

Vega86-6247
VIA Mark CoreFusion 533MHz
3.5" CPU Module
with 6S/3USB/VGA/LCD/LAN/Audio/CF
256MB SDRAM Onboard
User’s Manual
(Revision 1.0A)

ii
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may be contained in this document. And makes no commitment to update or to
keep current the information contained in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part,
in any form or by any means without the prior written permission of the ICOP Technology Inc.
Copyright 2006 ICOPTechnology Inc.
Manual No. IUM6247000-01 Ver.1.0A August, 2006
Trademarks Acknowledgment
Vega86is the registered trademark of ICOP Technology Inc.
Other brand names or product names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith
are served for identification purpose only.

iii
T a b l e o f C o n t e n t s
T ab l e o f C o n t e nt s.............................................................iii
C h a p t e r 1 Introduction……………………………………………1
1.1 Packing List............................................................1
1.2 Product Description................................................2
1.3 Specification...........................................................3
1.4 Board Dimension....................................................5
C h a p t e r 2 Installation……………………………………………..6
2.1 Board Outline.........................................................6
2.2 Connectors & Jumpers Location............................8
2.3 Connectors & Jumpers Summary.........................10
2.4 PinAssignments & Jumper Settings.....................12
2.5 System Mapping...................................................22
C h a p t e r 3 Driver Installation……………………………………24
Appendix ………………………………………………………………..25
A. STN Flat Panel Data Output......................................25
B. TFTFlat Panel Data Output....................................... 26
C.Flat Panel BIOSsetting...........………………………….27
D.Flat Panel Wiring and Lighting…………………………29
Warranty............................................................................................30

iv
This page is blank

Vega86-6247 Vega863.5" CPU Module 1
C h a p t e r 1
Introduction
1.1 Packing List
Product Name Package
Vega86-6247
Embedded Vega86 CPU All-in-One
Board
Manual & Drivers CD x 1
RS232 cable x 5
PRINTER cable x1
FDD cable x 1
IDE cable x 1 (44pin to 40 pin)
USB cable x 1 (USB port x 2)
Audio cable x 3
YKB for Keyboard & PS/2 Mouse x 1

Vega86-6247 Vega863.5" CPU Module 2
1.2 Product Description
The Vega86 Single-Board-Computer series (powered by VIA Mark CoreFusion processor) offers
high performance, cost-effectiveand energy efficient processor with integrated ProSavage4 SA
graphics controller, which is the powerful embedded x86 platform for Windows XP Embedded,
WEPOS, and embedded Linux application.
The complete board consists of the Mark CoreFusion processor and the VT82C686B PCI-ISA
South Bridge, Realtek RTL8100B 10/100 Fast Ethernet Controller, etc. The processor integrates
VIA’s high-performance ProSavage4 3D / 2D graphics controller, LCD and Flat Panel display
interfaces, with further superior performance between the CPU, DRAM and PCI bus with
pipelined, burst, and concurrent operation. The South Bridge is PC98 / PC99 compliant with
integrated UltraDMA-66 / 33 IDE, 2 (or 3) USB (1.1) ports, Super-I/O functions (floppy disk drive
interface and serial / parallel ports), and AC-97 link supporting digital audio functions.
The Vega86 SBC supports SDRAMs up to 256MB. As to the SDRAM controller, it meets the
standard PC133 Synchronous DRAM (SDRAM). The Synchronous DRAM interface allows zero
wait state bursting between the SDRAM and the data buffers at 133MHz.
The Vega86 SBC integrates S3 Graphics and 128-bit ProSavage4 graphics accelerators that
bring mainstream graphics performance to the Value PC with leading-edge 2D, 3D and DVD
video acceleration into a cost effective package.Vega86 SBC also combines the industry’s first
integrated AGP 4X solution with Microsoft Direct-X texture compression and massive 2Kx2K
textures to deliver unprecedented 3D performance and image quality for the Value PC mobile
market.
Vega86 SBC’s South Bridge supports four levels (doubleword) of line buffers, DMA transfers and
delay transaction to allow efficient PCI bus utilization and (PCI-2.2 compliant). The VT82C686B
also includes anintegrated Super I/O, integrated DS12885 style real time clock with extended
256 byte CMOS RAM, integrated master mode enhanced IDE controller with full scatter / gather
capability, integrated two (or three) USB (1.1) interface with root hub and two function ports with
built-in physical layer transceivers, Distributed DMA support and integrated AC-97 link for basic
audio functions.
Regarding the network architecture application, Vega86 SBC equips with the Realtek RTL8100B,
which is a highly integrated, cost-effective single-chip Fast Ethernet controller able to provide
32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u
10/100Base-T specifications and IEEE 802.3x Full Duplex Flow Control.

Vega86-6247 Vega863.5" CPU Module 3
1.3 Specification
Features Vega86-6247
CPU VIA Mark CoreFusion 533MHz
Chipset VIA VT82C686B
BIOS AMI BIOS
System Memory 256MB SDRAM onboard
Cache L1:64KB L2:64KB
Bus Interface PC/104 Standard Compliant
Watchdog Timer None
VGA Integrated 2D/3D AGP2X graphics with MPEG2
Accelerator, Shared system memory 8M/16M/32M
VGA, SVGA, XGA, SXGA and DSTN/TFT Flat Panel
interface support
LAN Realtek 8100B 10/100Mbps Ethernet Controller
Half/Full duplex capability
Audio VIA VT1612A, AC97 2.2 Specification.
I /O Interface Enhanced IDE interface (UltraDMA-100 / 66 / 33) x1
FDD interface x1
RS232 port x5
RS-232/485 port x1 (RS485 with Auto Direction)
Parallel port x1
USB port x3 (USB 1.1 version)
10/100Mbps Ethernet port x1
Connectors 2.00 mm 44-pin box header for IDE x1
2.00 mm 44-pin box header for LCD x 1
2.00 mm 34-pin box header for FDD x1
2.00 mm 26-pin box header for Printer x1
2.00 mm 10-pin box header for RS-232 x5
2.00 mm 10-pin header for USB (for 2 USB ports) x1
2.00 mm 4-pin wafer for Line-in/Line-out/MIC-in x3
2.54 mm 5-pin box header for Keyboard x1
2.54 mm 3-pin header for RS-485 x1
2.54 mm 2-pin header for Reset x1
2.54mm 4-pin header for +12V, -12V, -5V x1
External 15-pin D-Sub female connector for VGA x1
External 9-pin D-Sub male connector for RS-232 x1
External RJ-45 connector for Ethernet x1
External USB connector for x1
External Mini DIN socket for Keyboard/Mouse x1
Type I/II Compact Flash slot x1

Vega86-6247 Vega863.5" CPU Module 4
Flash Disk Support
44-pin IDE Flash Disk( EmbedDisk 16MB or above)
Type I/II CF Card
Power Requirement Single Voltage +5V @2.25A
Dimension 102 X 144mm (4.01 x 5.67 inches)
Weight 290g
Operating
Temperature -20oC ~ +60oC

Vega86-6247 Vega863.5" CPU Module 5
1.4 Board Dimension
Unit: mm

Vega86-6247 Vega863.5" CPU Module 6
C h a p t e r 2
Installation
2.1 Board Outline

Vega86-6247 Vega863.5" CPU Module 7
To guarantee the stability & maximum performance of original design, Vega86-6247
must be used with the manufacturer designated passive heat sink shown as below
photo.

Vega86-6247 Vega863.5" CPU Module 8
2.2 Connectors & Jumpers Location
Solder Side

Vega86-6247 Vega863.5" CPU Module 9
Bottom side

Vega86-6247 Vega863.5" CPU Module 10
2.3 Connectors & Jumpers Summary
Summary Table
Nbr Description Type of Connections Pin nbrs.
J1 FDD Pin Header, 2.0,17x2 10-pin
J2 Reset Pin Header, 2,54,1x2 2-pin
J4 USB Box Header,2.0, 5x2 10-pin
J5 Keyboard Pin Header, 2,54,1x5 5-pin
J6 PS/2 Keyboard / Mouse Mini-DIN Female 6-pin
J7 LAN RJ45 8-pin
J8 LCD Connector Box Header,2.0, 22x2 44-pin
J9 LCD Volts Sel. (5V or 3.3V) Pin Header, 2.54,3x1 3-pin
J10 IDE Box Header, 2.0,22x2 44-pin
J11 VGA D-Sub Female 15-pin
J12 CF Card Master/Slave Select
Pin Header, 2.54, 2x1 2-pin
J13 Power Connector Terminal Block 5.0,2x1 2-pin
J14 FAN ( Reserved Power-output
for FAN) Molex Header,2.0, 2x1 2-pin
J15 PC104 Connector – 64 pin Box Header, 2.5432x2 64-pin
J16 4P Power Source
(Interconnect to PC/104 - J15)
Pin Header, 2.54, 4x1 4-pin
J17 PC104 Connector – 40 pin Box Header, 2.5420x2 40-pin
J18 COM1 D-Sub Male 9-pin
J19 PRINT Pin Header, 2.0, 13x2 26-pin
J20 RS232/RS485 Select (COM 2)
Pin Header, 2.54, 3x1 3-pin
J21 COM2 Pin Header, 2.05x2 10-pin
J22 RS-485 Molex Header,2..54, 3x1 3-pin
J23 COM3 Pin Header, 2.05x2 10-pin
J24 COM4 Pin Header, 2.05x2 10-pin
J25 COM5 Pin Header, 2.05x2 10-pin
J26 COM6 Pin Header, 2.05x2 10-pin
J27 LINE OUT Molex Header, 2.0, 4x1 4-pin
J28 MIC IN Molex Header, 2.0, 4x1 4-pin
J29 LINE IN Molex Header, 2.0, 4x1 4-pin
J30 USB USB connector 4-pin
CF1 Compact Flash Type I/II CF Connector 50-pin
LED 0 LANActive LCD (Green) LED-SMD

Vega86-6247 Vega863.5" CPU Module 11
LED 1 LAN 1 Link LED (Yellow ) LED-SMD
PWR_L
ED POWERActive LED
IDE_LE
D IDE Link LED
SP1 BUZZER
S1 RESET SWITCH

Vega86-6247 Vega863.5" CPU Module 12
2.4 Pin Assignments & Jumper Settings
J1: FDD
Pin # Signal Name
Pin # Signal Name
34 DSKCHG\ 33 GND
32 HDSEL\ 31 GND
30 RD\ 29 GND
28 WP\ 27 GND
26 TR0\ 25 GND
24 WG\ 23 GND
22 WD\ 21 GND
20 STEP\ 19 GND
18 DIR\ 17 GND
16 MTR1\ 15 GND
14 DS0\ 13 GND
12 DS1\ 11 GND
10 MTR0\ 9 GND
8 INDEX\ 7 GND
6 DRV1 5 GND
4 NC 3 GND
2 DENSEL 1 GND
J2: RESET
Pin # Signal Name
Pin # Signal Name
1 RST_SW 2 GND
J4: USB
Pin # Signal Name
Pin # Signal Name
1 VCC 2 VCC
3 -DATA1 4 -DATA0
5 +DATA1 6 +DATA0
7 GND 8 GND
9 GND 10 GND

Vega86-6247 Vega863.5" CPU Module 13
J5: Keyboard
Pin # Signal Name
Pin # Signal Name
1 KBCLK 2 KBDAT
3 NC 4 GND
5 +5V
J6: PS/2 Keyboard / Mouse
Pin # Signal Name
Pin # Signal Name
1 KBCLK 2 MSCLK
3 GND 4 KBDAT
5 IRQ12 6 +5V
J7: LAN
Pin # Signal Name
Pin # Signal Name
1 TX+ 2 TX-
3 RX+ 4 LED0
5 LED0+ 6 RX-
7 LED1+ 8 LED1

Vega86-6247 Vega863.5" CPU Module 14
J8: LCD Connector
Pin # Signal Name
Pin # Signal Name
1 LCDVCC 2 LCDVCC
3 FPD0 4 FPD1
5 FPD2 6 FPD3
7 FPD4 8 FPD5
9 FPD6 10 FPD7
11 FPD8 12 FPD9
13 FPD10 14 FPD11
15 FPD12 16 FPD13
17 FPD14 18 FPD15
19 FPD16 20 FPD17
21 FPD18 22 FPD19
23 FPD20 24 FPD21
25 FPD22 26 FPD23
27 FP24 28 FP25
29 FPD26 30 FPD27
31 FPD28 32 FPD29
33 GND 34 GND
35 FPD30 36 FPCLK
37 FPD31 38 FPDEN
39 FPD32 40 FPHS
41 FPD34 42 FPVS
43 ENVEE 44 ENVDD
(Please refer toAppendix A, B for STN and TFT Flat Panel Data Output)
J9: LCD Volts Sel.
Pin # Signal Name
Pin # Signal Name
1-2 +5V 2-3 +3.3V

Vega86-6247 Vega863.5" CPU Module 15
J10: IDE
Pin # Signal Name
Pin # Signal Name
1 PCIRST- 2 GND
3 IDED7 4 IDED8
5 IDED6 6 IDED9
7 IDED5 8 IDED10
9 IDED4 10 IDED11
11 IDED3 12 IDED12
13 IDED2 14 IDED13
15 IDED1 16 IDED14
17 IDED0 18 IDED15
19 GND 20 NC
21 IDEREQ 22 GND
23 IDEIOW- 24 GND
25 IDEIOR- 26 GND
27 ICHRDY 28 GND
29 IDEACK- 30 GND
31 IRQ14 32 NC
33 IDESA1 34 PD_80P
35 IDESA0 36 IDESA2
37 IDECS-0 38 IDECS1
39 DASP 40 GND
41 VCC 42 VCC
43 GND 44 NC
J11: VGA
Pin # Signal
Name Pin # Signal Name
1 R OUT 2 GND
3 G OUT 4 GND
5 B OUT 6 GND
7 HSYNC 8 GND
9 VSYNCD 10 GND
J12: CF Card Master/Slave Select
Pin # Signal Name
OPEN Slave
CLOSE Master

Vega86-6247 Vega863.5" CPU Module 16
J13: Power Connector
Pin # Signal Name
1 5V
2 GND
J14: FAN
Pin # Signal Name
1 5V
2 GND
J15: PC104 Connector – 64pin
Pin # Signal Name
Pin # Signal Name
1 IOCHCHK * 2 GND
3 SD7 4 RESETDRV
5 SD6 6 +5V
7 SD5 8 IRQ9
9 SD4 10 -5V
11 SD3 12 DRQ2
13 SD2 14 -12V
15 SD1 16 OWS
17 SD0 18 +12V
19 IOCHRDY 20 GND
21 AEN 22 SMEMW *
23 SA19 24 SMEMR *
25 SA18 26 IOW *
27 SA17 28 IOR *
29 SA16 30 DACK3 *
31 SA15 32 DRQ3
33 SA14 34 DACK1 *
35 SA13 36 DRQ1
37 SA12 38 REFRESH *
39 SA11 40 SYSCLK
41 SA10 42 IRQ7
43 SA9 44 IRQ6
45 SA8 46 IRQ5