ICP DAS USA PCI-P8R8 User manual

- 1 -
Language English
Version V1.1
Update Jan.2009
………………………………………………
What’s on your package?
¾One PCI-P8R8/P16R16 card
¾One companion PCI CD (V 3.2 or later)
¾One Quick Start Guide(This document)
………………………………………………
Installing Windows Driver
Follow those steps:
I. Setup the Windows driver.
You can get the driver from:
CD:\NAPDOS\PCI\PCI-P16R16\DLL_OCX\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pci-p16r16/dll_ocx/
1
2
PCI-P8R8/P16R16

- 2 -
II. Click button to start installation.
III. Click button to install driver into the
default folder.
IV. Click button to continue installation.
V. Click button to reboot the PC.
………………………………………………
Installing Hardware on PC
Follow those steps:
I. Shut down your computer
II. Remove all covers from the computer
III. Select an unused PCI slot
IV. Carefully insert your I/O card into the PCI slot
V. Replace the PC covers
VI. Power on the computer
After powering-on the computer, the Plug&Play card
could work immediately.
3
Windows driver only support windows 98/NT/2000 and
XP/2003/vista 32-bit versions.

- 3 -
………………………………………………
Pin Assignments
4

- 4 -
………………………………………………
Self-Test
I. Prepare items.
DN-37(Optional)
External Power Device ex.DP-665(Optional)
II. Use DN-37 to connect the CN1.NO0 with CN1.DIA_0.
(pin1 connect to pin12)
III. Use DP-665 +24 V connect to DN-37 CN1.COM0 and then
DP-665 GND connects to GND and DN-37 DIB_0.
(+24 V connect to pin2, GND(-) connect to pin29 and pin30).
5
DN-37
+24 V
GND
GND
+5 V
CN1 CN2
(PCI-P16R16 only)
12 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
External

- 5 -
IV.Run the DIO sample program.
Get the zipped file from:
CD:\NAPDOS\PCI\PCI-P16R16\dll_ocx\Demo
V. Check number of the PCI-P16R16, and test DIO function.
Please follow those steps:
1 The one PCI-P8R8/P16R16 had successfully
installed to PC.
2 Select the board number for the
PCI-P8R8/P16R16.It starts from 0.
3 Click this button to do DIO test.
4 Check the Bit 0(Checkbox) from Digital Output
Set
5 Bit 0(light) of the Digital Input Status will
change to Red light(High), PASS!!
Complete
1
24
5 3

- 6 -
………………………………………………
Additional Information
9PCI-P8R8/P16R16 Card Product page:
http://www.icpdas.com/products/DAQ/pc_based/pci_p16r16.htm
9DN-37(Optional) page:
http://www.icpdas.com/products/DAQ/screw_terminal/dn_37.htm
9DP-665(Optional) page:
http://www.icpdas.com/products/Accessories/power_supply/dp-665.htm
9Documents:
CD:\NAPDOS\PCI\PCI-P16R16\manual
http://ftp.icpdas.com.tw/pub/cd/iocard/pci/napdos/pci/pci-p16r16/manual/
9Software:
CD:\NAPDOS\PCI\PCI-P16R16
http://www.icpdas.com/download/pci/p16r16/index.htm
The ICP DAS Web Site
http://www.icpdas.com
Contact Us
[email protected]
Copyright ©2008 by ICP DAS Co., Ltd. All right are reserved
6
Technical support
Supplies and ordering information
Ways to enhance your device
FAQ
Application story