ICP DAS USA PIO-D64U User manual

PIO-D64U Quick Start Guide ICP DAS CO., LTD.
1
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [e-mail]
The package includes the following items:
Step 1: Setup the Windows driver. The driver is located at:
The UniDAQ driver supports 32-/64-bit Windows 2K/XP/2003/Vista/7/8; it
is recommended to install this driver for new user:
CD: \NAPDOS\PCI\UniDAQ\DLL\Driver
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
The PIO-DIO driver supports Windows 98/NT/2K and 32-bit XP/ 2003/
Vista/7/8. Recommended to install this driver for have been used PIO-DIO
series boards of regular user, please refer to :
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/pio-dio/manual/quickstart
/classic/
For PIO-D64U
What’s in the shipping package?
Software Utility CD
(V5.2 or later)
Quick Start Guide
(This Document)
PIO-D64U
Installing Windows Driver
English/ Jun. 2013/ Version 1.1

PIO-D64U Quick Start Guide ICP DAS CO., LTD.
2
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [e-mail]
Step 2: Click the “Next>”button to start the installation.
Step 3: Check your DAQ Card is or not on supported list, then click the
“Next>”button.
Step 4: Select the installed folder, the default path is C:\ICPDAS\UniDAQ ,
confirm and click the “Next>”button.
Step 5: Check your DAQ Card on list, then click the “Next>”button.
Step 6: Click the “Next>”button on the Select Additional Tasks window.
Step 7: Click the “Next>”button on the Download Information window.
Step 8: Select “No, I will restart my computer later”and then click the
“Finish”button.
For detailed information about the driver installation, please refer to Chapter
2.1 “Getting the UniDAQ Driver DLL Installer package”of the UniDAQ SDK
user manual.
Step 1: Shut down and power off your computer.
Step 2: Remove the cover from the computer.
Step 3: Select an unused PCI slot.
Step 4: Carefully insert your I/O card into the PCI slot.
Step 5: Replace the PC cover.
Step 6: Power on the computer.
After powering-on the computer, please finish the Plug&Play steps according
to the prompted messages.
Installing Hardware on PC

PIO-D64U Quick Start Guide ICP DAS CO., LTD.
3
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [e-mail]
Pin Assignments

PIO-D64U Quick Start Guide ICP DAS CO., LTD.
4
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [e-mail]
1. Use the CA-2002 (optional) to connect the CN1 with CN2.
2. Use the CA-2002 (optional) to connect the CN3 with CN4.
3. The UniDAQ Utility.exe is located in:
This program (UniDAQ Utility) will be placed in the default path after completing
installation.
Default Path: C:\ICPDAS\UniDAQ\Driver\
Double click the “UniDAQUtility.exe”
Self-Test
Double-Click
1
CN1
CN2
CN3
CN4
CA-2002
CA-2002

PIO-D64U Quick Start Guide ICP DAS CO., LTD.
5
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [e-mail]
4. Execute the UniDAQ Utility Program.
5. Get DIO function test result.
Confirm the PIO-D64U card had
successfully installed to PC. It starts
from 0.
2
Click this button
to start test.
3
Select the “Port 0”
Check channel 0, 2, 4, 6
6
5
Click “Digital Output” item.
4
Port0: DO 0-7
Port1: DO 8-15
Port2: DO 16-23
Port3: DO 24-31

PIO-D64U Quick Start Guide ICP DAS CO., LTD.
6
WebSite: http:// www.icpdas.com.tw E-Mail: [e-mail] , [e-mail]
PIO-D64U Series Card Product Page:
http://www.icpdas.com/root/product/solutions/pc_based_io_board/pci/pio-d64.html
CA-2002 page (optional):
http://www.icpdas.com/products/Accessories/cable/cable_selection.htm
Documentation and Software:
CD:\NAPDOS\PCI\UniDAQ\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/
Select the “Port 0”
8
The corresponding D/I becomes red
for channel 0, 2, 4, 6 of D/O is ON.
9
Click “Digital Input”item.
7
Related Information
PASS
Port0: DI 0-7
Port1: DI 8-15
Port2: DI 16-23
Port3: DI 24-31