Icp das usa Si-002 User manual

Written by Raiden Lan

Service and usage information for

SI-002 User Manual

Version 1.0 , Jun 2016

SI-002

SI-002 User Manual, version 1.0 Page: 2

Warranty

All products manufactured by ICP DAS are under warranty regarding defective

materials for a period of one year, beginning from the date of delivery to the original

purchaser.

Warning

ICP DAS assumes no liability for any damage resulting from the use of this

product.ICP DAS reserves the right to change this manual at any time without notice.

The information furnished by ICP DAS is believed to be accurate and reliable.

However, no responsibility is assumed by ICP DAS for its use, not for any

infringements of patents or other rights of third parties resulting from its use.

Copyright

Copyright @ 2016 by ICP DAS Co., Ltd. All rights are reserved.

Trademark

The names used for identification only may be registered trademarks of their

respective companies.

Contact US

If you have any problem, please feel free to contact us.

You can count on us for quick response.

Email: service@icpdas.com

SI-002 User Manual, version 1.0 Page: 3

Table of Contents

Table of Contents ..................................................................................3

1. Introduction .......................................................................................4

1.1. Features ....................................................................................................... 5

1.2. Specification ................................................................................................. 5

1.3. DIO Wiring Connection................................................................................. 7

1.4. Overview ...................................................................................................... 8

1.4.1. Front Panel......................................................................................... 8

1.4.2. Back Panel ......................................................................................... 9

1.5. Dimensions................................................................................................. 12

2. Getting Started ................................................................................13

2.1. Connecting to Network, PC and Power ...................................................... 13

2.2. Installing the MicroSIP Utility ...................................................................... 14

2.3. Using SI-002 connect to MicroSIP Utility .................................................... 15

3. Web Applications ............................................................................19

3.1. Connect to SI-002 web site ........................................................................ 19

3.1.1. Installing the eSearch Utility ............................................................. 19

3.1.2. Connecting ....................................................................................... 21

3.2. Web Configuration...................................................................................... 22

3.2.1. Function menu.................................................................................. 23

3.2.2. Login ................................................................................................ 23

3.2.3. User Account .................................................................................... 23

3.2.4. Standard Config................................................................................ 24

3.2.5. Audio Config ..................................................................................... 25

3.2.6. RFID Config...................................................................................... 26

3.2.7. Information ....................................................................................... 27

SI-002 User Manual, version 1.0 Page: 4

1. Introduction

SI-002 is video intercom door station that supports VoIP

technology and SIP communication protocol. With HA-401

product, households can see visitors' images and have a video

conversation with them when the door bell ringing, after identity

confirmation, they can open the door remotely. Using

high-resolution CMOS camera and advanced echo cancellation

technology can show a clearer picture and excellent audio quality

and timeliness of transport. It is a compact video intercom

solution for building residential.

SI-002 User Manual, version 1.0 Page: 5

1.1. Features

Full-duplex voice and video intercom

Support for SIP communications architecture

Using high-resolution camera 1080P (1920 x 1080)

Advanced echo cancellation technology

Built-in high sensitivity microphone and speaker

Built-in call button

Built-in Relay output channel (door control or alarms output)

Built-in Digital input channel (door magnetic switch detection

or external emergency button)

1.2. Specification

System

CPU

Cortex A8 CPU (720 MHz)

SRAM

512 MB

Flash Memory

512 MB

EEPROM

16 KB

Communication

Ethernet Port

10/100 Base-TX (Auto-negotiating, Auto

MDI/MDI-X, LED indicators)

Digital Input

Channels

2

Input Type

Dry contact (Source)

Dry Contact Level

Off Voltage Level:

Open

On Voltage Level:

Close to GND

SI-002 User Manual, version 1.0 Page: 6

Relay Output

Channels

1

Output Type

Form C (N.O./COM./N.C.)

Contact Capacity

0.6A @ 125 VAC; 2A @ 30 VDC

HMI

Camera

1080P (1920 x 1080), CMOS Sensor

Audio

AMP 2.5 W; Digital microphone

Mechanical

Dimensions

102 mm x 161 mm x 41 mm (W x L x H)

Installation

Wall Mounting (Suitable for the European 86 mm x

86 mm outlet box)

Environment

Operating Temperature

-25 ˚C ~ +60 ˚C

Storage Temperature

-30 ˚C ~ +80 ˚C

Humidity

10 ~ 90 % RH, non-condensing

Power Supply

Input Range

+10 VDC ~ +48 VDC

Power Consumption

1.5 W @ 24 VDC Max.

Protection

Reverse Polarity Protection

SI-002 User Manual, version 1.0 Page: 7

1.3. DIO Wiring Connection

SI-002 User Manual, version 1.0 Page: 8

1.4. Overview

Here is a brief overview of the components and its descriptions for module status.

1.4.1. Front Panel

Speaker

Call Button

Camera

Microphone

SI-002 User Manual, version 1.0 Page: 9

Call Button with LED Indicator

When the module is off line and user push call button, the module will dial to

preset sip client. When the module is online and user push call button, the

module will end current call.

LED Indicator is shown current status, as shown in the below.

LED Action

Current status

High brightness

On line

Low brightness

Off line

1.4.2. Back Panel

Ethernet Port

J1 Connector

(Pin 1 ~ 8)

RSW

SI-002 User Manual, version 1.0 Page: 10

RSW (Rotary Switch)

.

RSW Value

Function

A

Set network interface to DHCP

mode

B

Set network interface to static IP

mode.

IP: 192.168.72.30

Mask: 255.255.0.0

Gateway: 192.168.1.1

E

FW Update Mode

F

Recover system settings

Other

N/A

Ethernet Port

An Ethernet port is an opening on SIP network equipment that Ethernet cables

plug into. Ethernet ports accept cables with RJ-45 connectors.

J1 Connector

SI-002 User Manual, version 1.0 Page: 11

Name

Description

1

+Vs

V+ of Power Supply(

2

GND

GND of Power Supply

3

DI0

Digital Input CH0

4

DI1

Digital Input CH1

5

DI.GND

Digital Input GND

6

RL.NO

Relay Normally-Open

7

RL.COM

Relay Common

8

RL.NC

Relay Normally-Closed

SI-002 User Manual, version 1.0 Page: 12

1.5. Dimensions

All dimensions are in millimeters.

SI-002 User Manual, version 1.0 Page: 13

2. Getting Started

If you are a new user, begin with this chapter, it includes a guided tour that provides a

basic overview of installing, configuring and using the SI-002.

2.1. Connecting to Network, PC and Power

The SI-002 is equipped with an RJ-45 Ethernet port for connection to an Ethernet

hub/switch and PC. Please set RSW of SI-002 and PC Network as below.

SI-002 User Manual, version 1.0 Page: 14

2.2. Installing the MicroSIP Utility

The MicroSIP Utility is a open source portable SIP softphone based on PJSIP stack

for Windows OS. The user can use this Utility to connect with SI-002.

Step 1: Get the MicroSIP Utility tool

The MicroSIP Utility can be obtained from below link:

http://www.microsip.org/downloads

Step 2: Follow the prompts to complete the installation

SI-002 User Manual, version 1.0 Page: 15

2.3. Using SI-002 connect to MicroSIP Utility

When RSW of SI-002 set to B, SI-002 will use a default IP settings to connect PC.

The default IP settings are as follows:

SI-002

IP Address

192.168.72.30

Subnet Mask

255.255.0.0

PC side

IP Address

192.168.255.1

Subnet Mask

255.255.0.0

Step 1: Run the MicroSIP Utility

Double-click theMicroSIP Utility shortcut on your desktop.

SI-002 User Manual, version 1.0 Page: 16

Step 2: MicroSIP settings

a. Click Menu => Settings

b. Select audio codec (enable PCMU, PCMA, GSM) and video codec (enable

H.263+)

Step 3: Making a Phone call

Press call button of SI-002 to call MicroSIP and then the MicroSIP will show

Incoming call. Press "Answer with video" button of MicroSIP to answer call.

SI-002 User Manual, version 1.0 Page: 17

Step 4: Answer call

Press "Answer with video" button of MicroSIP to answer call. The PC will

show local video and remote video and hear voice from SI-002.

SI-002 User Manual, version 1.0 Page: 18

SI-002 User Manual, version 1.0 Page: 19

3. Web Applications

The SI-002 contains an advanced web configuration system that provides users with

configure SI-002 through a standard web browser.

3.1. Connect to SI-002 web site

3.1.1. Installing the eSearch Utility

The user can get current IP of SI-002 by eSearch Utility.

Step 1: Get the eSearch Utility tool

The eSearch Utility can be obtained from below link:

http://www.icpdas.com/root/product/solutions/software/utilities/vxcomm.html

Step 2: Run the eSearch Utility

SI-002 User Manual, version 1.0 Page: 20

Double-click the eSearch Utility shortcut.

Step 3: Choose “Search Servers”button

After pressing "Search Servers' button, that will search all of the SI-002

modules on your network.

After search, it will show all

of SI-002 modules, the user

can get IP of SI-002

ICP DAS USA SI-002 User manual

Popular Intercom System manuals by other brands