ICPDAS iDS-718i-D User manual

Programmable Device Server User Manual (V1.1, Mar. 2020) - 1 -
Non-
Programmable Device Server
User Manual
iDS-718i-D
Intelligent Device Server with 1 RS-232/422/485 (Isolated, RoHS, DB9)
iDS-718iM-D CR
Intelligent Device Server with 1 RS-232/422/485 (Isolated, Metal Case, RoHS, DB9)
iDS-728i-T CR
Intelligent Device Server with 2 RS-232/422/485 (Isolated, RoHS, Terminal block)
iDS-728iM-T CR
Intelligent Device Server with 2 RS-232/422/485 (Isolated, Metal Case, RoHS, Terminal block)
iDS-448iM-D
Intelligent Device Server with 4 RS-232/422/485 (Isolated, RoHS, DB9)

Programmable Device Server User Manual (V1.1, Mar. 2020) - 2 -
Warranty
All products manufactured by ICP DAS are under warranty regarding defective materials for a
period of one year, starting from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for damages resulting from the use of this product. ICP DAS reserves
the right to change this manual at any time without notice. The information furnished by ICP DAS
is believed to be accurate and reliable. However, no responsibility is assumed by ICP DAS for its
use, nor for any infringements of patents or other rights of third parties resulting from its use.
Copyright
Copyright © 2020 by ICP DAS. All rights are reserved.
Trademark
The names used for identification only may be registered trademarks of their respective
companies.
Contact US
If you have any question, please feel free to contact us.
We will give you quick response within 2 workdays.
Email: [email protected] , [email protected]

Programmable Device Server User Manual (V1.1, Mar. 2020) - 3 -
Table of Contents
1. INTRODUCTION ------------------------------------------------------------------------------------------------------------- 5
1.1 PACKING LIST ------------------------------------------------------------------------------------------------------------------6
1.2 FEATURES-----------------------------------------------------------------------------------------------------------------------7
1.3 SPECIFICATIONS ---------------------------------------------------------------------------------------------------------------8
1.4 ORDERING INFORMATION -----------------------------------------------------------------------------------------------------9
1.5 OPTION ACCESSORIES ---------------------------------------------------------------------------------------------------------9
2. GETTING STARTED --------------------------------------------------------------------------------------------------------10
2.1 DIMENSIONS AND MOUNTING ----------------------------------------------------------------------------------------------- 10
2.2 PIN ASSIGNMENT ------------------------------------------------------------------------------------------------------------ 14
2.2.1
iDS-718 Series
-------------------------------------------------------------------------------------------------------14
2.2.2
iDS-728 Series
-------------------------------------------------------------------------------------------------------16
2.2.3
iDS-448 Series
-------------------------------------------------------------------------------------------------------17
2.3 LED INDICATORS ------------------------------------------------------------------------------------------------------------ 18
2.4 CONFIGURATION METHOD -------------------------------------------------------------------------------------------------- 19
2.4.1
Factory Setting
------------------------------------------------------------------------------------------------------19
2.4.2
Setting IP Address
--------------------------------------------------------------------------------------------------19
3. WEB MANAGEMENT INTERFACE -------------------------------------------------------------------------------------21
3.1 WEB BROWSER--------------------------------------------------------------------------------------------------------------- 21
3.2 INITIALIZE SETTING --------------------------------------------------------------------------------------------------------- 22
3.2.1
Basic Setting
---------------------------------------------------------------------------------------------------------22
3.2.2
Network Setting
-----------------------------------------------------------------------------------------------------23
3.2.3
SNMP
------------------------------------------------------------------------------------------------------------------24
3.2.4
Account/Password Table
------------------------------------------------------------------------------------------25
3.2.5
Accessible IP Table
-------------------------------------------------------------------------------------------------26
3.2.6
Monitor
----------------------------------------------------------------------------------------------------------------27
3.2.7
Event Notification
---------------------------------------------------------------------------------------------------28
3.2.8
Firmware Upgrade
--------------------------------------------------------------------------------------------------29
3.2.9
Restart
----------------------------------------------------------------------------------------------------------------29
4. SERIAL PORT OPERATION MODES----------------------------------------------------------------------------------30
4.1 SERIAL PORT BASIC SETTING ----------------------------------------------------------------------------------------------- 30
4.2 VIRTUAL COM --------------------------------------------------------------------------------------------------------------- 32
4.2.1
Installing Virtual COM Utility--------------------------------------------------------------------------------------32
4.2.2
Network Setting
-----------------------------------------------------------------------------------------------------32
4.2.3
Configuring Virtual COM Ports
-----------------------------------------------------------------------------------33
4.3 SOCKET MODES -------------------------------------------------------------------------------------------------------------- 35

Programmable Device Server User Manual (V1.1, Mar. 2020) - 4 -
4.3.1
TCP Server
-----------------------------------------------------------------------------------------------------------35
4.3.2
TCP Client
------------------------------------------------------------------------------------------------------------36
4.3.3
UDP
--------------------------------------------------------------------------------------------------------------------37
4.4 PAIR CONNECTION ----------------------------------------------------------------------------------------------------------- 38
4.4.1
Pair Connection Server
--------------------------------------------------------------------------------------------38
4.4.2
Pair Connection Client
---------------------------------------------------------------------------------------------39
4.5 RFC2217 -------------------------------------------------------------------------------------------------------------------- 40
4.6 ETHERNET MODEM----------------------------------------------------------------------------------------------------------- 41

Programmable Device Server User Manual (V1.1, Mar. 2020) - 5 -
1. Introduction
The iDS-700/400 Series is a new generation Device Server from ICP DAS and is equipped with a
powerful CPU module running on the open operating system, various connectivity (Ethernet,
micro SD and serial port) and communication interfaces. Compared with the previous generation
PDS, not only the CPU performance is higher but also more features are improved such as 256 MB
flash, 256 MB DDR3 memory, unique 64-bit hardware serial number, and real-time clock, etc.
These make the iDS Series becoming one of the most powerful system.
This device server is designed to add Ethernet and Internet connectivity to any RS-232 and RS-
422/485 device, and to eliminate the cable length limitation of legacy serial communication,
coupled with a large built-in RAM buffer, allows for fast transmission and prevents congestion of
serial data on the network. Built-in powerful ARM-based processor offers excellent performance
at low power consumption. The preloaded high-performance operating system is open, flexible,
scalable and allows user to easily add or remove application/service from configuration
mechanism.

Programmable Device Server User Manual (V1.1, Mar. 2020) - 6 -
1.1 Packing List
The package includes the following items:
One (Programmable) Device Server hardware module
One software utility CD
One RS-232 console/download cable, CA-0903
One Quick Start Guide
Note: If any of these items are missed or damaged, contact the local distributors for
more information. Save the shipping materials and cartons in case you want to ship in
the future.

Programmable Device Server User Manual (V1.1, Mar. 2020) - 7 -
1.2 Features
Incorporate Serial Devices in an Ethernet network
Virtual COM for 32-bit and 64-bit Windows XP/2003/Vista/7
High-performance ARM-based Processor
256 MB DDR3 memory for data transmission and buffering
Zero Data Loss
UDP Support
RFC2217 support
Modem Emulator
Open, Flexible and Scalable Platform
SNMP Management Protocol

Programmable Device Server User Manual (V1.1, Mar. 2020) - 8 -
1.3 Specifications
Models
iDS-718i-D
iDS-728i-T
iDS-718iM-D
iDS-728iM-T
iDS-448iM-D
CPU Module
CPU
32-bit High Performance Processor
Peripheral
microSD, RTC, 64-bit Serial Number, Watchdog, Buzzer
Communication Interface
COM1
5-wire RS-232/422/485 (Isolated)
8-wire RS-232/422/485 (Isolated)
COM2
–
5-wire
RS-232/422/485
(Isolated)
–
5-wire
RS-232/422/485
(Isolated)
8-wire RS-232/422/485 (Isolated)
COM3
–
–
–
–
8-wire RS-232/422/485 (Isolated)
COM4
–
–
–
–
8-wire RS-232/422/485 (Isolated)
Ethernet
10/100 Base-TX, RJ-45 port (Auto-negotiating, Auto MDI/MDI-X,
LED indicators), PoE (IEEE 802.3af, Class 1)
2-port 10/100 Base-TX Ethernet
Switch with LAN Bypass,
RJ-45 port (Auto-negotiating, Auto
MDI/MDI-X, LED indicators), PoE
(IEEE 802.3af, Class 1)
COM Port Signals
3-wire RS-232
RxD, TxD and GND
5-wire RS-232
RxD, TxD, CTS, RTS and GND
8-wire RS-232
RxD, TxD, CTS, RTS ,DCD, DSR ,DTR, and GND
RS-422/485
TxD+, TxD-, RxD+, RxD- and GND/Data+, Data- and GND
RS-485
Data+, Data- and Iso.GND
COM Port Formats
Data Bits
5, 6, 7, 8
Parity
None, Even, Odd, Mark, Space
Stop Bits
1, 1.5, 2
Baud Rate
921.6 kbps Max.
Flow Control
RTS/CTS, XON/XOFF
Pull High/Low
Resistor
Switch-selectable (1 kΩ for RS-422/485, Non-Resistor for RS-232)
Power
ESD Protection
Yes (with Frame Ground)
Protection
Power input reverse polarity protection
Required Supply
Voltage
+12 VDC ~ +48 VDC (non-regulated) or PoE (IEEE 802.3af, Class 1)
Power
Consumption
3.5 W
Software
Protocols
ICMP, IPv4, IPv6, TCP, UDP, DHCP, BOOTP, Telnet, SSH, FTP, SFTP, DNS, SNMP V1/V2c/V3, HTTP,
SMTP, ARP
Configuration
Method
Web and eSearch Utility for Windows
Virtual COM for
Windows
Windows XP/2003/2008/7/8 x86/x64, 2012 x64, XP Embedded
Virtual COM for
Linux
Linux kernel 2.4.x, 2.6.x, 3.x
SNMP Standards
RFC1213 MIB-II, RFC1317
Application
Modes
Virtual COM, TCP Server, TCP Client, UDP, Pair Connection, RFC2217, Terminal, Reverse Telnet, TCP
Modem, Modbus Gateway

Programmable Device Server User Manual (V1.1, Mar. 2020) - 9 -
Mechanical
Dimensions
(W x H x D)
76 mm x 114 mm x 42 mm
(97 mm x 114 mm x 42 mm
for "M" versions)
76 mm x 120 mm x 42 mm
( 97 mm x 120 mm x 42 mm
for "M" versions )
129 mm x 166 mm x 47 mm
Installation
DIN-Rail
Casing
Plastic (Metal for "M" versions)
Environment
Operating
Temperature
-25 °C ~ +75 °C
Storage
Temperature
-40 °C ~ +80 °C
Humidity
5 ~ 90% RH, non-condensing
1.4 Ordering Information
iDS-718i-D
Intelligent Device Server with 1 RS-232/422/485 (Isolated, RoHS, DB9)
iDS-718iM-D CR
Intelligent Device Server with 1 RS-232/422/485 (Isolated, Metal Case, RoHS, DB9)
iDS-728i-T CR
Intelligent Device Server with 2 RS-232/422/485 (Isolated, RoHS, Terminal block)
iDS-728iM-T CR
Intelligent Device Server with 2 RS-232/422/485 (Isolated, Metal Case, RoHS,
Terminal block)
iDS-448iM-D CR
Intelligent Device Server with 4 RS-232/422/485 (Isolated, Metal Case, RoHS, DB9)
1.5 Option Accessories
GPSU06U-6 CR
24 VDC/0.25 A, 6 W Power Supply
MDR-20-24 CR
24 VDC/1 A, 24 W Power Supply with DIN-R
DIN-KA52F-48 CR
48V/0.52A, 25 W Power Supply with DIN-Rail Mounting (RoHS, for NS-205PSE)
CA-0903
9-Pin Female D-Sub and RS-232 Connector Cable, 30 cm Cable
CA-0910
9-Pin Female D-Sub and 3-wire RS-232 Cable, 1 m Cable
NS-205 CR
Unmanaged 5-port Industrial Ethernet Switch (RoHS)
NS-205PSE CR
Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)

Programmable Device Server User Manual (V1.1, Mar. 2020) - 10 -
Unit: mm
2. Getting Started
2.1 Dimensions and Mounting
iDS Series

Programmable Device Server User Manual (V1.1, Mar. 2020) - 11 -
Unit: mm
Fig 2-3

Programmable Device Server User Manual (V1.1, Mar. 2020) - 12 -

Programmable Device Server User Manual (V1.1, Mar. 2020) - 13 -
Unit: mm
Fig 2-4

Programmable Device Server User Manual (V1.1, Mar. 2020) - 14 -
2.2 Pin Assignment
2.2.1 iDS-718 Series
DIP Switch
COM1
E1
E1 & CON1(1 ~ 12)
Terminal NO
Pin Assignment
E1
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
DC
(12~48V)
11
P.PWR
12
P.GND
CON1
1 12
Pull high/low resistors for the RS-422/RS-485 Port
DIP
Switch
1
2
3
4
5
6
7
8
RS-485/RS-422
RS-485
RS-422
M1
M0
Pull High/Low
Terminator
ON
1 KΩ
1 KΩ
120 Ω
120 Ω
0
0
OFF
Default
1
1

Programmable Device Server User Manual (V1.1, Mar. 2020) - 15 -
COM1 Pin Assignment
Pin
RS232
RS422
RS485
1
-
TXD-
Data-
2
RXD
TXD+
Data+
3
TXD
RXD+
-
4
-
RXD-
-
5
GND
GND
GND
6
-
-
-
7
RTS
-
-
8
CTS
-
-
9
-
-
-
DIP Switch(COM1 Mode)
COM1
M1
M0
DIP Switch
RS232
ON
OFF
RS422
OFF
ON
RS485
OFF
OFF
Software
ON
ON

Programmable Device Server User Manual (V1.1, Mar. 2020) - 16 -
2.2.2 iDS-728 Series
E1
E1 & CON1(1 ~ 12)
Terminal NO
Pin Assignment
E1
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
DC
(12V-48V)
11
P.PWR
12
P.GND
118
CON2
1 12
CON2(1 ~ 18)
Terminal NO
Pin Assignment
COM2
1
RS-422_RxD2-
2
RS-422_RxD2+
3
RS-422_TxD2/D2-
4
RS-422_TxD2/D2+
5
RS-232_CTS2
6
RS-232_RTS2
7
RS-232_RxD2
8
RS-232_TxD2
9
GND2
COM1
10
RS-422_RxD1-
11
RS-422_RxD1+
12
RS-422_TxD1/D1-
13
RS-422_TxD1/D1+
14
RS-232_CTS1
15
RS-232_RTS1
16
RS-232_RxD1
17
RS-232_TxD1
18
GND1
CON1

Programmable Device Server User Manual (V1.1, Mar. 2020) - 17 -
2.2.3 iDS-448 Series
E1, E2 & CON1(1 ~ 6)
Terminal NO
Pin Assignment
E1、E2
DC
(12~48V)
1
P.PWR
2
P.GND
3
P.PWR
4
P.GND
5
-
6
-
E1
E2
1 6
COM1
COM2
COM3
COM4

Programmable Device Server User Manual (V1.1, Mar. 2020) - 18 -
2.3 LED Indicators
The iDS contains three LED indicators.
LED In
LED Indicators
Color
Meaning
PWR
Red
Power is on
RUN
Green
OS is running
Ethernet
Green
Ethernet Cable is connecting
Table 2-1
DIP Switch (COM1~4 Mode)
COM1
M1
M0
DIP Switch
RS232
ON
OFF
RS422
OFF
ON
RS485
OFF
OFF
Software
ON
ON
COM1~4 Pin Assignment
Pin
RS232
RS422
RS485
1
DCD
TXD-
Data-
2
RXD
TXD+
Data+
3
TXD
RXD+
-
4
DTR
RXD-
-
5
GND
GND
GND
6
DSR
-
-
7
RTS
-
-
8
CTS
-
-
9
-
-
-

Programmable Device Server User Manual (V1.1, Mar. 2020) - 19 -
2.4 Configuration Method
2.4.1 Factory Setting
IP:192.168.255.1
NetMask:255.255.255.0
Gateway:192.168.255.254
Protocol : icpdas protocol
2.4.2 Setting IP Address
Using web browser (IE or Chrome) and typing the default IP (192.168.255.1) to connect to the iDS
devices to set IP address(DHCP or Static). Please refer to the Fig 2-4、2-5:
Fig 2-5 Login
Default IP Address
Default ID : admin
Password : admin
1
2
3
Click “Login” button to use the iDS-700
management interface.

Programmable Device Server User Manual (V1.1, Mar. 2020) - 20 -
Fig 2-6 Network
Set IP Information
2
1
3
Click “save” button to
save the setting.
Click “Network“
This manual suits for next models
4
Table of contents
Other ICPDAS Server manuals
Popular Server manuals by other brands

Supermicro
Supermicro SuperServer SSG-620P-ACR12H user manual

Supermicro
Supermicro SuperStorage SSG-6029P-E1CR12H user manual

Supero
Supero SUPERSERVER 6014P-T user manual

Symantec
Symantec Backup Exec 3600 R2 Getting started guide

Dell
Dell PowerEdge System management guide

NEC
NEC UNIVERGE NEAX 2000 IPS reference guide