ICRealtime IPFX-P4030X-IRW1 User manual

HD IR Speed Dome User’s Manual
Version 1.0.1

i
Table of Contents
1FEATURES AND FUNCTIONS...........................................................................................1
1.1 General Introduction...................................................................................................................................................1
1.2 Features .......................................................................................................................................................................1
1.2.1 Zoom Speed Limit..................................................................................................................................................1
1.2.2 OSD .........................................................................................................................................................................1
1.2.3 Preset Setup and Call ...........................................................................................................................................1
1.2.4 Auto Scan................................................................................................................................................................1
1.2.5 Auto Touring...........................................................................................................................................................1
1.2.6 Auto Pattern............................................................................................................................................................1
1.2.7 Privacy Masking.....................................................................................................................................................1
1.2.8 Auto Flip ..................................................................................................................................................................1
1.2.9 Self-diagnosis.........................................................................................................................................................1
1.2.10 Day/Night Mode (B/W & Color Mode)............................................................................................................2
1.2.11 Auto Focus.........................................................................................................................................................2
1.2.12 Backlight Compensation ..................................................................................................................................2
1.2.13 Pan Tilt and Zoom.............................................................................................................................................2
1.2.14 3D Intelligent Positioning .................................................................................................................................2
1.2.15 Idle Status ..........................................................................................................................................................2
1.2.16 Image Stabilizer/Flip.........................................................................................................................................2
2QUICK CONFIGURATION TOOL.......................................................................................3
2.1 Overview ......................................................................................................................................................................3
2.2 Operation .....................................................................................................................................................................3
3WEB OPERATION..............................................................................................................6
3.1 Network Connection...................................................................................................................................................6
3.2 Login and Logout........................................................................................................................................................6

ii
4CABLE CONNECTION .......................................................................................................9
4.1 Combination Cable Connection..............................................................................................................................9
4.2 System Layout ........................................................................................................................................................10
4.2.1 System Connection .............................................................................................................................................10
4.2.2 Alarm Connection ................................................................................................................................................10
5FAQ...................................................................................................................................11
5.1 Daily Maintenance..................................................................................................................................................11
5.2 Problems and Solutions.......................................................................................................................................11
6APPENDIX ⅠLIGHTNING PROOF AND SURGE PROTECTION .....................................12
7APPENDIX 2 TOXIC OR HAZARDOUS MATERIALS OR ELEMENTS ...........................13
Welcome
Thank you for purchasing our product!
This user’s manual is designed to be a reference tool for the operation of your system.
Here you can find information about this speed dome features and functions, as well as a detailed menu tree.
Please keep it well for future reference!
Before installation and operation, please read the following safeguards and warnings carefully!

iii
Important Safeguards and Warnings
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling
or installation.
We are not liable for any problems caused by unauthorized modification or attempted repair.
2．Transportation Security
No heavy stress, violent vibration or water splash are allowed during transportation, storage and
installation.
Please use the original packing material (or the material of the same quality) when you ship it back to
the manufacturer.
3．Installation
Do not apply power to the product before completing installation.
Do not put object on the product.
4. Qualification Requirement
The device has to be installed and repaired by professional licensed technician and installation
personnel.
5. Dismantling
Don’t remove screws or protection cover; there are no parts inside the SD for users to repair by
themselves.
6．Environment
This series product should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
Please keep it away from the electromagnetic radiation object and environment.
Please keep the sound ventilation.
Do not allow the water and other liquid falling into the device. This series product complies with the IP66
standard specified in the Degrees of Protection Provided by Enclosure.
Please make sure the CCD (CMOS) component is out of the radiation of the IR beam device. Otherwise
it may result in CCD (CMOS) optical component damage.
Usually we recommend thunder-proof device to prevent thunder strike.
The GND port of the product shall be grounded to further enhance the reliability of the device.
7. Daily Maintenance
Current series product has no power button. Please unplug all corresponding power cables before your
begin installation or daily maintenance work.

iv
Please keep the dustproof cap back to protect the CCD or CMOS part if the device does not work for a
long time.
Do not touch CCD (CMOS) component. You can use the blower to clean the dust on the surface of the
device. You can use the dry cloth with some alcohol or mild detergent to clear if necessary.
Do not use the volatility solvent such as the benzene or thinner, or detergent with strong abradability. It
may result in lens damage or it may adversely affect the device performance.
If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean
the device. Finally use the dry cloth to clean the device.
8. About Accessories
Always use all the accessories recommended by manufacturer.
Before installation, please open the package and check that all the components are included in the package:
Contact your local retailer ASAP if something is missing in your package.

1
1Features and Functions
1.1 General Introduction
This series HD IR speed dome product is an integrated high intelligent speed dome. It adopts new
configuration design and is easy for the project construction. This is a digital and intelligent product of vivid
video. The installation is convenient.
Comparing with the previous series product, this series HD IR speed dome has added some new features. It
supports intelligent analysis function, and the PTZ rotation speed can automatically adjust according to the
zoom rate of the lens. It supports various languages, real-time clock function and protocol auto recognition.
It supports 360° continuously pan, 110°tilt(-20°-90°) and 180° auto flip. It can realize no blind spot monitor.
1.2 Features
This series speed dome has the following features:
1.2.1 Zoom Speed Limit
The IR HD intelligent speed Dome adopts auto match technology between focal length and rotation speed.
The pan and tilt speed of the speed dome change according to the zoom rate of the device. The movement
speed becomes slower when the zoom speed increases, and the movement speed becomes higher when
the zoom speed decreases.
1.2.2 OSD
It can display the called preset and preset ID, speed dome title, speed dome system temperature, speed
dome location coordinates when touring via menu setting.
1.2.3 Preset Setup and Call
Preset function is to save the address information (such as PTZ pan/tilt, focus and etc) to the memory so
that you can quickly adjust the dome and PTZ to the correct position.
1.2.4 Auto Scan
Camera scans back and forth regularly in a horizontal field. Here you need to set left and right limit and scan
speed.
1.2.5 Auto Touring
Add addresses into a routine in a desired order and then set time and stop duration for each address. The
dome will begin an auto touring between these addresses.
1.2.6 Auto Pattern
Memorize dome operation such as pan, tilt, and zoom to repeat. You can call it to repeat the previous
operation.
1.2.7 Privacy Masking
Privacy masking is a user-defined, four-sided area that cannot be viewed by you. The masking area will
move with pan and tilt functions and automatically adjust in size as the lens zooms.
1.2.8 Auto Flip
As long as you continue to hold the keyboard joystick in the down position, the dome rotates 180 degrees
and repositions itself for uninterrupted viewing of any subjects that passes directly beneath the dome.
1.2.9 Self-diagnosis
There is a self diagnosis procedure when dome boots up.
Tilt and vertical engine check

2
Camera diagnostics (mainly zoom function diagnosis)
Display dome information.
1.2.10 Day/Night Mode (B/W & Color Mode)
Auto/manual switches in low illumination. There are several modes such as photoresistor, auto, manual and
etc. This function needs the speed dome driver (camera) supported.
1.2.11 Auto Focus
Support camera auto focus function.
1.2.12 Backlight Compensation
Balance the brightest and darkest sections of a scene to produce a more vivid picture.
1.2.13 Pan Tilt and Zoom
Supports zoom in and zoom out during tilt and pan movement.
You can still get vivid image even you set auto focus and auto iris during this period.
1.2.14 3D Intelligent Positioning
Support 3D intelligent positioning function. The speed dome can auto track to the specified zone.
1.2.15 Idle Status
When there is no available order for specified duration, you can use menu to set dome idle status.
1.2.16 Image Stabilizer/Flip
You can enable image stabilizer function and flip in the menu.
When there is vibration, this IS function can guarantee video stability and when flip, you can view video
more clearly.
This function needs speed dome driver (camera) supported.

3
2Quick Configuration Tool
2.1 Overview
Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it
to upgrade the device.
Please note the tool only applies to the IP addresses in the same segment.
2.2 Operation
Double click the “ConfigTools.exe”icon, you can see an interface is shown as in Figure 2-1.
In the device list interface, you can view device IP address, port number, subnet mask, default gateway,
MAC address and etc.
Figure 2-1
Select one IP address and then right click mouse, you can see an interface is shown as in Figure 2-2.
Note:
You can set the IP address, subnet mask and gateway for the network camera and PC. Please note network
camera IP address and PC IP address shall be in the same network segment if there is no router. Network
camera default IP address is 192.168.1.108. If there is a router, please set the corresponding gateway and
subnet mask.
The factory default user name is admin and password is admin. For security reasons, please modify your
password after you first login.
For detailed WEB operation, please refer to the Web Operation Manual in the resource CD.

4
Figure 2-2
Select the “Open Device Web” item; you can go to the corresponding web login interface. See Figure 2-3.
Figure 2-3
If you want to modify the device IP address without logging in the device web interface, you can go to the
configuration tool main interface to set.
In the configuration tool search interface (Figure 2-1), please select a device IP address and then double
click it to open the login interface. Or you can select an IP address and then click the Login button to go to
the login interface. See Figure 2-4.
In Figure 2-4, you can view device IP address, user name, password and port. Please modify the
corresponding information to login.
Please note the port information here shall be identical with the port value you set in TCP port in Web
Network interface. Otherwise, you cannot login the device.
If you are using device background upgrade port 3800 to login, other setups are all invalid.

5
Figure 2-4
After you logged in, the configuration tool main interface is shown as below. See Figure 2-5.
Figure 2-5
For detailed information and operation instruction of the quick configuration tool, please refer to the
Quick Configuration Tool User’s Manual included in the resources CD.

6
3Web Operation
This series speed dome product supports the Web access and management via PC.
Web includes several modules: live view, PTZ, setup, alarm, logout and etc.
Speed dome factory default setup:
IP address: 192.168.1.108.
User name: admin
Password: admin
3.1 Network Connection
Please follow the steps listed below for network connection.
Make sure the speed dome has connected to the network properly.
Speed dome IP address and PC IP address shall be in the same network segment. Speed dome default
IP address is 192.168.1.108. If there is router, please set the corresponding gateway and subnet mask.
Use order ping ***. ***. ***. *** (* speed dome address) to check connection is OK or not.
3.2 Login and Logout
Open IE and input speed dome address in the address bar.
For example, if your speed dome IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address
bar. See Figure 3-1.
Figure 3-1
System pops up warning information to ask you whether install control webrec.cab or not. Please click OK
button, system can automatically install the control. When system is upgrading, it can overwrite the previous
Web too.
If you can’t download the ActiveX file, please check whether you have installed the plug-in to disable the
control download. Or you can lower the IE security level. See Figure 3-2.
Input your IP
address here

7
Figure 3-2
After installation, the interface is shown as below. See Figure 3-3.
Please input your user name and password.
Default factory name is admin and password is admin.
Select the network connection type.
Note: For security reasons, please modify your password after you first login.
Figure 3-3
After you logged in, you can see the main window. See Figure 3-4.

8
Figure 3-4
Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction.

9
4Cable Connection
4.1 Combination Cable Connection
The speed dome combination cable includes network cable, audio/video cable connection port, RS485
connection port, alarm input and output port. Please refer to the label for detailed information.
Please note the IE6 does not support alarm upload function. Please use IE7 or higher version.
If it is your first time to boot up the WEB on the Windows 7 OS, please right click the Internet
Explorer icon on the desktop and then select “Run as Administrator”.
Slight difference may be found in the port amount since some functions are optional.
Recommended models of PoE Switch
8-Ch: S1000-8TP
1-Ch: PFT1200
Name
Function
POWER
GND
Power port. Connect to the power cable.
GND: ground end.
485A
485B
RS485 remote control.
AUDIO
OUT
Audio output port.
GND
Ground port.
IN
Audio input port.
VIDEO
GND
Ground port.
OUT
Video output port.
RJ 45
Network port. Connect to network cable and HI-PoE
ALARM
IN
Seven alarm input channels. It is to receive relay signal from the
external alarm source. You can go to dome menu to activate
specified preset or patter.

When the activation mode is NO (normal open), dome alarms
when there is low voltage. High voltage will not activate the
alarm.
When the activation mode is NC (normal close), dome alarms
when there is high voltage. Low voltage will not activate the
alarm.
Note:
Dome alarm input message is ground mode.

Dome alarm input signal are two modes: normal open and
normal close.

The default setup: 7-channel alarm input.
GND
Alarm input ground end.

10
ALARM
OUT 2
Two alarm output channels. When there is an alarm from current
channel, system activates relay or not.
Alarm output relay default setup is NO.
Note:
The default setup: 1-channel alarm output, 2-channel alarm
output optional.
4.2 System Layout
4.2.1 System Connection
Please refer to Figure 4-1 for system connection information.
Figure 4-1
4.2.2 Alarm Connection
Please refer to Figure 4-2 for alarm connection information.
Figure 4-2
Network
Output
AC220V
Input Transformer
NVR
P C
Power
Output

11
5FAQ
5.1 Daily Maintenance
Please clean dome cover regularly to get vivid image.
Handle the cover with care. Use water to wash. Don’t use cloth to clean.
Note:
The sweat from your hand may erode plating surface, your nail may scrape dome cover resulting in blur
image.
5.2 Problems and Solutions
SYMPTOM
CAUSE
SOLUTION
1) No self-diagnosis,
no video signal
when I connect
dome to power.
Red LED is not on.
Your power supplying does
not apply to the power. Or
connection is too loose.
Power off or transformer
problem.

Check power is connected or
properly earthed.
Check power supply condition
or check transformer.
Red LED light on the power
board is on
Power supplying is low
Something wrong with power
board.

Use multimeter to check
dome load.
Please contact retailer to
replace power board.
2) No self diagnosis.
There is a noise
Power supplying is inadequate.
Replace power supplying.
Mechanical malfunction.
Need electrical engineer help.
3)Video signal is not
successive
Circuit connection is too loose.
Connect tightly.
Video switch or power problem
Need electrical engineer help.
4) Video is not clear.
Focus is in manual mode.
Control manually.
Dome cover is dirty.
Wash dome cover
5) During camera
switch, there is a tilt
movement in the
monitor.
Camera power is not in the same
Phase.
When several domes are
connected to one transformer,
please connect the transformer
output cable to the domes’ same
side.

12
6Appendix Ⅰ Lightning Proof and Surge Protection
This series speed dome adopts TVS lightning protection technology. It can effectively prevent damages from
various pulse signals below 1500W, such as sudden lighting and surge. While maintaining your local
electrical safety code, you still need to take necessary precaution measures when installing the speed dome
in the outdoor environment.
The distance between the signal transmission cable and high-voltage device (or high-voltage cable)
shall be at least 50 meters.
Outdoor cable layout shall go under the penthouse if possible.
For vast land, please use sealing steel tube under the land to implement cable layout and connects one
point to the earth. Open floor cable layout is forbidden.
In area of strong thunderstorm hit or near high sensitive voltage (such as near high-voltage transformer
substation), you need to install additional high-power thunder protection device or lightning rod.
The thunder protection and earth of the outdoor device and cable shall be considered in the building
whole thunder protection and conform to your local national or industry standard.
System shall adopt equal-potential wiring. The earth device shall meet anti-jamming and at the same
time conforms to your local electrical safety code. The earth device shall not short circuit to N (neutral)
line of high voltage power grid or mixed with other wires. When connect the system to the earth alone,
the earth resistance shall not be more than 4Ωand earth cable cross-sectional area shall below 25
mm2. See Figure 6-1.
Figure 6-1

13
7Appendix 2 Toxic or Hazardous Materials or Elements
Component
Name
Toxic or Hazardous Materials or Elements
Pb Hg Cd Cr VI PBB PBDE
Sheet Metal ○○○○○○
Plastic Parts ○○○○○○
PCB ○○○○○○
Housing ○ ○○○○○
Camera Driver ○ ○○○○○
Bearing ○○○○○○
Connection
Cable ○○○○○○
Motor
(If possible) ○○○○○○
Power
(If possible) ○○○○○○
Bracket
(If possible) ○○○○○○
Accessories ○○○○○○
Note
O: Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T11363-2006 standard.
X: Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials
in the parts is above the relevant threshold of the SJ/T11363-2006 standard. During the environmental-
friendly use period (EFUP) period, the toxic or hazardous substance or elements contained in products will
not leak or mutate so that the use of these (substances or elements) will not result in any severe
environmental pollution, any bodily injury or damage to any assets. The consumer is not authorized to
process such kind of substances or elements, please return to the corresponding local authorities to process
according to your local government statutes.

14
Note
•This manual is for reference only. Slight difference may be found in the user interface.
•All the designs and software here are subject to change without prior written notice.
•All trademarks and registered trademarks are the properties of their respective owners.
•If there is any uncertainty or controversy, please refer to the final explanation of us.
•Please visit our website or contact your local service engineer for more information.