iDeaPLAY BP300 User manual

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Model:BP300
Portable Power Station
USER GUIDE

-1- -2- -3- -4-
-5- -6- -7- -8- -9-

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Table of Contents
Customer Support ........................................................................................................ 1
Product Accessories ..................................................................................................... 2
Product Overview ......................................................................................................... 3
How To Use ..................................................................................................................... 4
Power On/Off functions .............................................................................................. 4
How to use the power station to supply power to 12VDC appliances .......... 4
How to use the power station to charge AC appliances .......................... 4
How to use the power station to charge USB devices .............................. 5
How to use the LED flashlight …………………………………....................………. 5
LCD display …………………………………....................................................………. 6
How To Charge The Power Station ......................................................................... 7
Charging with an AC adapter .......................................................................... 7
Charging with a solar panel ……………………………………..........................……. 7
Charging with a vehicle charging lead ……………………..........................……. 8
Charging with USB Type-C ……………………..............................................……. 8
Specifications ………………………………………..................................…………..…………….. 9
Attention ………………………………………………………..................................................…… 10

-1- -2- -3- -4-
-5- -6- -7- -8- -9-

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Friendly Tips
Thank you for purchasing the iDeaPlay BP300 Portable Power Station.
Please carefully read the instruction manual and use the product correctly.
Customer Support
For any support or comments concerning our products, please send an email
to: [email protected]
or call Toll-Free NO: [phone]

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Product Accessories
Universal Plug AdapterVehicle Charging Cable Carrying Case
User Guide Quick Start Guide Warranty Card
BP300 Portable Power Station AC Charger
Quick Guide

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Product Overview
1. Handle 2. LCD Display 3. AC Output 1
4. AC On/Off 5. AC Output 2 6. LED Flashlight
7. Power On/Off 8. DC Input 9. DC Output
10. USB Type C 11. USB 1 12. USB 2
13. USB 3(QC)
6 7
1
2
4 53
8 9 1110
12
13

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
How To Use
Power On/Off Functions
a. Auto off
To save power the BP300 power station will automatically turn off after 30 seconds if no
devices connected to it are pulling a current greater than 100mA.
b. Power on/remain on
To disable the auto power off function turn on the power station by pressing the power
button for 3 seconds. This will override the 30 seconds automatic off function and keep
the power station turned on for 6 hours after any device has been disconnected.
c. Power off
To turn off the power station press the power button for 3 seconds.
Note: If using a device that draws less than 100mA use the Power On/Remain On
function to prevent the power station from automatically turn off after 30 seconds.
How to use the power station to supply power to 12V DC appliances?
The BP300 Power Station has a 12V DC output that can be used to power small DC
appliances.
With the power station turned off connect the DC appliance to the DC output port.
The power station will automatically turn on and supply power to the DC port.
The DC and OUT indicator lights will be lit on the LED display.
To save power, when you have finished please turn off the power station by pressing
and holding the power button for 3 seconds.
How to use the power station to charge AC appliances?
The BP300 Power Station has 2 AC outputs that can be used simultaneously. The
maximum total output is 300W.
With the power station turned off plug the AC appliance into one of the AC output ports.
Turn on the power station and enter the AC mode by pressing the AC button for 3
seconds. Switch to AC power mode by pressing the AC On/ Off button.
When the AC power is on the indicator light next to the button will be lit. The AC and OUT

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
indicator lights will be lit on the LED display.
To save power, when you have finished please turn off the power station by pressing
and holding the power button for 3 seconds.
Warning:
Port type and voltage standards vary depending on the country. Please make sure
the voltage and port used are compatible with the appliance standards.
How to use the power station to charge USB devices?
Connect the USB cable to one of the power stations USB ports. The power station will
automatically turn on and supply power to the USB port. The USB and OUT indicator
lights will be lit on the LED display.
USB Type-C Power Delivery, this port is compatible with USB PD devices. The USB
Type-C port can be used to power PD compatible devices at up to 60W.
The Type-C and OUT indicator lights will be lit on the LED display.
USB 3(QC) is compatible with quick charge devices providing faster charging at 5V/2.4A;
9V/2A; 10V-12V/1.5A
To save power, when you have finished please turn off the power station by pressing
and holding the power switch for 3 seconds.
How to use the LED flashlight
The LED flashlight has 3 modes, On, SOS, and Strobe.
a. Turn on
To turn on the LED flashlight press the power button.
b. Change light modes
To cycle between the different lighting modes press the power button.
(On/SOS/Strobe/Off)
c. To turn off
To turn off the LED light press the power button for three seconds.

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Note: If there is an abnormal output current the protection function will be enabled
and the corresponding characters on the LED screen will flash. Unplug the abnormal
charging device within 30 seconds to continue use, if not, the power station will turn
off automatically.
LCD Display
Battery Indicator
Input Charge
Output Charge
USB
Type C
DC
AC
IN
OUT
When the LED light is on or the power station is in use or being
charged the remaining power will be displayed with the battery
indicator lit and the battery percentage digits.
When charging the power station, the “IN”characters light up,
the input charge will display and the battery percentage digits
and battery indicator will be lit.
When any of the output ports are active the “OUT” characters
light up. The charge will display.
When any of the USB ports are in use the “USB” characters light up.
When the USB Type-C port is in use the “Type C” characters light up.
When any of the DC ports are in use the “DC” characters light up.
When any of the AC ports are in use the “AC” characters light up.
When any of the input ports are in use the “IN” characters light up.
When any of the input ports are in use the “OUT” characters light up.

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Charging by AC adapter
Charging by solar panel
(Solar Panel is not included )
How To Charge The Power Station?
Charging with an AC adapter
The power station can be charged by connecting the AC adapter that comes with the
package to the household AC outlet.
Connect to the other end of the AC adapter to the DC Input Port of the power station.
With the adapter input charging function, the voltage range is 12V DC – 24V DC.
Charging with a Solar Panel
With solar cell input charging function, the voltage range is 12V DC – 24V DC with a
simple MPPT algorithm.

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
1. Place the solar panel in a place where the direct sunlight is strong; don't expose the
power station to direct sunlight or rain.
2. Connect the output of the solar panel to the DC Input Port of the power station.
Charging with a Vehicle Charging Lead
To charge the BP300 power station with a vehicle charging lead. Connect one end of
the car charger to the DC Input Port.
Start your vehicle's engine and connect the other end of the charging lead to your
vehicles auxiliary/cigarette lighter port. The DC charging voltage range is 12V-24V.
Charging with USB Type-C
The power station can be charged with a USB Type-C lead.
Connect the USB Type-C adapter to the USB Type-C port, connect the other end to a
USB power outlet or an AC adapter and plug into a power outlet.
Warning:
Only use one of the charging methods at any time.

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
Specifications
Model
Battery Capacity
Dimension (LWH)
Weight
Built-in Battery
Charging Time
DC Input
DC Output
AC Output
Input/Output 1
Output 2
Output 3
Working Temperature
Protection Function
Flashlight Function
Package Contents
BP300
67500mAh / 250Wh
190x140x145mm (7.48x5.51x5.71inch)
2.8kg (98.8oz)
High-Quality Lithium Polymer Batteries
7.0Hrs Charged by 15V/4A
AC Charger:15V/4A
Vehicle Charging Cable：12-24V
Solar Panel Input：12-24V
12V/10A
2x115V/300W/60Hz
1xPD (5V, 9V, 12V, 15V, 20V)/3A
2x5V/4.8A (2.4A Max. per port)
1xQC3.0 5V/3A, 9V/2A, 12V/1.5A
Charging Temperature 32~113°F
Discharge Temperature 14~113°F
Over Charge Protection, Over Release Protection,
Over Current Protection, Short Circuit Protection,
Over Power Protection, Over Temperature Protection
Three Modes: On, SOS, Strobe
BP300, 15V/4A AC Charger, Vehicle Charging Cable,
Universal Plug Adapter, Carrying Case, User Manual,
Warranty Card, Quick Start Guide

-1- -2- -3- -4-
-5- -10-
-6- -7- -8- -9-
Warning:
a. Do not overcharge the internal battery-See Instruction Manual.
b. Do not smoke, strike a match, or cause a spark in the vicinity
of the power pack.
c. Only charge the internal battery in a well-ventilated area.
d. Risk of Injury To Persons. Do not use this product if the
output cord or device are damaged in any way.
e. This device is not intended for use in a commercial repair facility.
f. This device is intended to be stored indoors when not in use. This device should not
be stored or left outdoors when not in use.
g. This device is intended for temporary use outdoors and reasonable care should be
exercised when using this device in wet conditions.
5014697
CERTIFIED TO ANSI/CAN/UL STD 2743
Attention
Not permitted on aircrafts
To preserve the battery lifespan, please use and recharge at least
once every 3 months
Use original or certified charger and cables
Avoid extreme temperature
Avoid dropping
Do not disassemble
This device is not waterproof, do not expose to liquids

-1- -2- -3- -4-
-5- -6- -7- -8- -9-

-1- -2- -3- -4-
-5- -6- -7- -8- -9-
www.iDeaUSA.com
BP300I19UMEN-01
Portable Power Station
BP300