Idis DirectCX TC-B5501X User manual

DirectCX
Camera
Installation Manual
TC-B5501X
TC-B5501XP

2
This is a basic installation manual for use of an IDIS camera. Users who are using this product for the rst time, as well
as users with experience using comparable products, must read this manual carefully before use and heed to the
warnings and precautions contained herein while using the product. Safety warnings and precautions contained in
this manual are intended to promote proper use of the product and thereby prevent accidents and property damage
and must be followed at all times. Once you have read this manual, keep it at an easily accessible location for future
reference.
•The manufacturer will not be held responsible for any product damage resulting from the use of unauthorized parts and
accessories or from the user's failure to comply with the instructions contained in this manual.
•The information in this document is believed to be accurate as of the date of publication. The manufacturer is not
responsible for any problems resulting from the use thereof. The information contained herein is subject to change
without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
•It is recommended that rst-time users of this camera and individuals who are not familiar with its use seek technical
assistance from their retailer regarding product installation and use.
•If you need to disassemble the product for functionality expansion or repair purposes, you must contact your retailer and
seek professional assistance.
•Both retailers and users should be aware that this product has been certied as being electromagnetically compatible for
commercial use. If you have sold or purchased this product unintentionally, please replace with a consumer version.
Safety Symbols
Symbol Type Description
IEC60417, No.5031 Direct current
IEC60417, No.5032 Alternating current
In-Text
Symbol Type Description
Caution Important information concerning a specic function.
Note Useful information concerning a specic function.
Before reading this manual

Before reading this manual
3
Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the
appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future
reference.
3. Cleaning
Unplug this equipment from the wall outlet before cleaning it. Do not
use liquid aerosol cleaners. Use a damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approval
of the manufacturer as such additions may result in the risk of re,
electric shock or other personal injury.
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling that is not strong
enough to sustain the camera. The equipment may fall, causing
serious injury to a child or adult, and serious damage to the
equipment. Wall or shelf mounting should follow the manufacturer's
instructions, and should use a mounting kit approved by the
manufacturer.
This equipment and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the
equipment and cart combination to overturn.
Do not place this equipment in an enclosed space. Sucient
ventilation is required to prevent an increase in ambient temperature
which can cause malfunction or the risk of re.
7. Power Sources
This equipment should be operated only from the type of power
source indicated on the marking label. If you are not sure of the
type of power, please consult your equipment dealer or local power
company.
You may want to install a UPS (Uninterruptible Power Supply)
system for safe operation in order to prevent damage caused by an
unexpected power stoppage. Any questions concerning UPS, consult
your UPS retailer.
This equipment should be remain readily operable.
8. Power Cord
Operator or installer must remove power and TNT connections before
handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the equipment due to lightning
and power-line surges. If thunder or lightning is common where the
equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result in
the risk of re or electric shock.
11. Objects and Liquids
Never push objects of any kind through openings of this equipment
as they may touch dangerous voltage points or short out parts that
could result in a re or electric shock. Never spill liquid of any kind on
the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing
to qualied service personnel.
13. Damage requiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualied service personnel under the following conditions:
A. When the power-supply cord or the plug has been damaged.
B. If liquid is spilled, or objects have hit the equipment.
C. If the equipment has been exposed to rain or water.
D. If the equipment does not operate normally by following the
operating instructions, adjust only those controls that are covered
by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work
by a qualied technician to restore the equipment to its normal
operation.
E. If the equipment has been dropped, or the cabinet damaged.
F. When the equipment exhibits a distinct change in performance —
this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician
has used replacement parts specied by the manufacturer or that
have the same characteristics as the original part. Unauthorized
substitutions may result in re, electric shock or other hazards.
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the
service technician to perform safety checks to determine that the
equipment is in proper operating condition.
16. Field Installation
This installation should be made by a qualied service person and
should conform to all local codes.
17. Correct Batteries
Warning: Risk of explosion if battery is replaced by an incorrect type.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
The battery shall not be exposed to excessive heat such as sunshine,
re or the like.
18. Tmra
A manufacturer’s maximum recommended ambient temperature
(Tmra) for the equipment must be specied so that the customer and
installer may determine a suitable maximum operating environment
for the equipment.

Before reading this manual
4
FCC Compliance Statement
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART
15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE
WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE
RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO
CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE.
WARNING: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE
CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS.
WEEE (Waste Electrical & Electronic Equipment)
Correct Disposal of This Product
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
oce, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
Copyright
© 2020 IDIS Co., Ltd.
IDIS Co., Ltd. reserves all rights concerning this manual.
Use or duplication of this manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited.
Contents of this manual are subject to change without prior notice for reasons such as functionality enhancements.
Registered Trademarks
IDIS is a registered trademark of IDIS Co., Ltd.
Other company and product names are registered trademarks of their respective owners.
The information in this manual is believed to be accurate as of the date of publication even though explanation
about some functions may not be incorporated. We are not responsible for any problems resulting from the use
thereof. The information contained herein is subject to change without notice. Revisions or new editions to this
publication may be issued to incorporate such changes.

5
1
2
3
Part 1 – Introduction.........................................6
Product Features ................................................................6
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Overview .......................................................................8
Body......................................................................................8
Rear ......................................................................................9
Installation .....................................................................10
CS-Mount Lens...........................................................................10
C-Mount Lens ............................................................................10
Mounting ................................................................................10
Dimensions ..............................................................................11
Part 2 - Camera Connection .................................12
DirectCX DVR Layout ...........................................................12
Part 3 - Appendix ...........................................14
Troubleshooting ...............................................................14
Specications ..................................................................15
Table of Contents

6
Product Features
TC-B5501X/XP is an analog camera that transmits video
over coaxial.
•Support for DC 12V and PoC (coaxial force)
PoC: TC-B5501XP Model Only
•Wide dynamic range compensation (True WDR) for
improved video quality in high-contrast situations
•Support TVI/AHD/SD video output
•Supports fog removal
•Sense-Up support for improved low-lighting video
capture performance
•Day & Night feature (built-in IR cut lter changer)
•Event detection mode: Motion detection
•C/CS mount lens connection support
Part 1 – Introduction

Part 1 – Introduction
7
Accessories
Upon purchasing the product, check inside the box to make sure all the following accessories are included. External
appearances and colors of the accessories may vary depending on the model.
Camera C-Mount Ring
Installation Parts Protective Cover (attaches to camera)
Quick Guide

Part 1 – Introduction
8
Overview
Product color and design may vary depending on the
model.
Body
1
2
4
5
3
1
Image Sensor
2CS - Mount Ring
3CS - Mount Ring Screw
4Mount Bracket Installation Hole
5Auto Iris Lens Connector
•Image Sensor
Converts optical Image into electronic signals.
If the lens is not attached to the camera, use the
protective cover to protect the image sensor.
•CS-Mount Ring
Used to tighten the CS mount lens and adjust the
Back Focus.
•CS-Mount Ring Screw
Used to secure the mount ring after adjusting the
Back Focus
•Mount Bracket Installation Hole
This bracket can be installed on either top or bottom
of the camera. Use 1/4–20 UNC (20-thread), 2.5mm
+/- 0.2mm (ISO standard), or 0.197 (ASA standard)
standard screw.
•Auto Iris lens Connector
If using the DC type automatic Iris lens, connect the
automatic Iris jack.
Connect only by using a lens with a long auto iris jack.

Part 1 – Introduction
9
Rear
TC-B5501X
1
2
3
4
1Power (DC 12V)
2Power LED
3BNC Video Out
4OSD button
•Power (DC 12V)
Connect to the power adapter. (DC 12V) The power
distinguishes + and - .
•Power LED
Displays the system operating status.
•BNC Video Out
Connect to the DVR.
•OSD button
Used to set the OSD menu.
TC-B5501XP
1
2
3
1Power LED
2BNC Video Out
3OSD button
•Power LED
Displays the system operating status.
•BNC Video Out
Connect to the PoC Power unit
For TC-B5501XP products, CVBS output is available for
a preview only when the camera is being installed.
•OSD button
Used to set the OSD menu.
The following table describes the coaxial cable
specications.
<The coaxial cable specifications>
Item Content Note
Conector BNC
Cable 3C-2V 5C-2V
Maximum
Length
300m 500m
The Power LED Status Indication
LED Status
Description
Power
LED
O
No connection
On
Connection

Part 1 – Introduction
10
Installation
The lens must be purchased separately. If you'd like
to purchase a lens, contact your camera retailer. This
camera supports manual iris lenses and DC type auto iris
lenses, it can be mounted with CS-mount or C-mount
type when connect to the camera.
•Product color and design may vary depending on
the model.
•We recommend megapixel lenses for clearer and
higher resolution images.
•Video type auto iris lenses are not supported.
•Use a lens that weighs less than 450g. Heavier
lenses can cause the camera to lose its balance.
•Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall o if the wall or
ceiling is not strong enough to support its weight.
•Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be aected
adversely.
CS-Mount Lens
1 Remove the protective cover from the camera.
2 Turn the lens in clockwise direction and mount it on
the camera.
C-Mount Lens
1 Remove the protective cover from the camera.
2 Turn the mount ring in clockwise direction and
mount the ring on to the camera.
3 Turn the C-mount lens in clockwise direction and
mount it on to the C-mount ring.
Mounting
Install the bracket on the top or the bottom of the
camera to secure it. For bracket installation, use 1/4-20
UNC (20 Thread), 2.5mm +/- 0.2mm (ISO standard), or
0.197 (ASA Standard) standard screws.

Part 1 – Introduction
11
Dimensions
Front
74mm
60mm
121.8mm
6mm
Side
74mm
60mm
121.8mm
6mm

12
Part 2 - Camera Connection
DirectCX DVR Layout
TC-B5501X
DirectCX DVR
TVI Camera
Power
iRAS Remote Monitoring
VGA Monitor Out
HDMI Monitor Out
Network

Part 2 - Camera Connection
13
TC-B5501XP
DirectCX DVR
TVI Camera
Power
iRAS Remote Monitoring
VGA Monitor Out
HDMI Monitor Out
Network
PoC Power Unit

14
Troubleshooting
Problem Check
The main unit won't turn
on.
•Check the power cable connection. If using the PoC power, check the connection
of the coaxial cable.
•Check the power outlet. If using the PoC power, check the device power.
I can't see Live videos. •Check the camera's power status.
•Check the connection status of the DVR device.
•If using the PoC power, check the connection status of the PoC device.
•Check the removal of the camera lens cover.
•For a manual iris lens, make sure the iris is open. For a DC type auto iris lens, check
the connection of the auto iris jack.
Images are blurry. •Make sure the lens is clean. If not, clean it using a soft piece of cloth or a brush.
•Make sure the lens is in focus. Adjust the focus during daytime.
•If there is too much light coming into the camera or the camera is picking up an
overly bright light source, adjust the camera's position/angle accordingly.
Video color appears
incorrect.
Check the white balance settings. If using the Auto option, it may take some time
for the white balance to be adjusted.
Images are blinking. •If the camera is pointed at the sun or a uorescent lamp, adjust the camera's
angle away.
•For a DC type auto iris lens, check the connection of the auto iris jack.
Part 3 - Appendix

Part 3 - Appendix
15
Specications
These product specications may change without prior notice.
Camera
Image Sensor 1/2.8" CMOS
Max. Resolution 2592x1944
Scanning Mode Progressive Scan
Lens type Optional (CS/C-Mount)
Iris Control Manual iris, DC type auto iris (megapixel recommended)
Min. Illumination COLOR : 0.12Lux @ F 1.3
B&W : 0.06Lux @F 1.3
Dynamic Range True WDR
Electronic Shutter Speed Auto, Manual (1/30 ~ 1/30,000), Anti-Flicker, Sense-up(OFF, X2, X4, X8, X16, X32)
White Balance Auto, Auto Expansion, AWC-SET, Manual
Day & Night Auto, Manual
Video Out * 1 BNC
Auto Iris Out 4-pin mini din jack (standard connection)

Part 3 - Appendix
16
Video
Video Output TVI / AHD / SD
Max. Frame Rate 20fps : 2592 x 1944
12.5fps : 2592 x 1944
30fps : 2560 x 1440
30fps : 1920 x 1080
30fps : 720 x 480
Supported Resolution 2592 x 1944, 2560 x 1440, 1920 x 1080, 720 x 480
General
Operating Temperature -10°C ~ +50°C (-50°F ~ +122°F)
Operating Humidity 0% ~ 90%
Power Source TC-B5501X DC 12V
TC-B5501XP PoC
Power
Consumption
TC-B5501X Maximum 1.8W
TC-B5501XP Maximum 3.2W
Approval FCC, CE
No FCC CE certication for TC-B5501XP
External Dimensions (W x H x D) 74mm x 60mm x 121.9mm (2.91" x 2.36" x 4.79")
Weight (Main Unit) 0.24kg (0.52lb)
V1.0

V1.0

IDIS Co., Ltd.
For more information, please visit at
www.idisglobal.com