ieGeek ZS-GX7S User manual
Wire-free
Indoor Camera
ZS-GX7S
Quick Start Guide
Official website:https://www.iegeek.com
YEARS
WARRANTY
2
Validate your warranty within 7days
and get a 2year extended warranty
on your iegeek security products.
Email:[email protected]
Technical Support
If you need help, please contact ieGeek
before returning your product. Most questions
can be answered through our online support
center at : www.iegeek.com or our after-sale
Technische Unterstutzung
Wenn Sie Hilfe brauchen, kontaktieren Sie
bitte ieGeek Support Team zuerst, bevor Sie
Ihre Bestellung zuriicksenden. Meiste Fragen
Oder Probleme konnen von unserem Online
Support Center beantwortet und gelbst
werden: www.iegeek.com, Oder unserer
Postfach nach dem Verkauf: service@iegeek.
com.
Support Technique
Si vous avez besoin d'aide veuillez contacter
ieGeek avant de retourner votre produit.
La plupart des questions peuvent etre
repondues via notre centre de support en
ligne a I'adresse : www.iegeek.com, ou la
boTte aux lettres apres-vente a I'adresse:
Assistenza Tecnica
Se avete bisogno di aiuto, le chiediamo
gentilmente di contattare ieGeek prima di
restituire il prodotto. La maggior parte delle
domande pud essere risolta tramite il nostro
centra di assistenza online all'indirizzo www.
iegeek.com o la casella di posta post-vendita
airindirizzo [email protected].
Soporte Tecnico
Si necesita ayuda, comuniquese con ieGeek
antes de devolver su producto. La mayoria de
las preguntas se pueden responder a traves
de nuestro centro de soporte en linea en
www.iegeek.com o el buzon de postventa en
Please read this manual thoroughly before
using this wireless security camera. If you
have any issues,
please email your order number and the
problem TO our mailbox: service@iegeek.
com. Receiving your message, we will provide
a fast solution in 24 hours.
Warming Tip:
•Before connecting this camera to the WiFi,
please ensure the Wi-Fi signal strength is to
be over than 75% to keep good Wi-Fi signal.
•This wireless camera supports events
recording when Wi-Fi disconnected.
FCC Statement
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the
equipment and receiver.
-Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced
radio/TV technician for help. Responsible for
compliance could void the user's authority to
operate this equipment. (Example- use only
shielded interface cables when connecting to
computer or peripheral devices).
Any Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
This equipment complies with Part 15 of
the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful
interference, and,
(2)This device must accept any interference
received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation
exposure limits set forth for uncontrolled
environment This equipment should be
installed and operated with minimum
distance 20cm between the radiator and
your body. (FCC ID: 2AZL7-ZS-GX1S)
CONTENTS
English
Frangais
Deutsche
Español
Italiano
01-12
16-29
33-46
50-62
66-79
CONTENTS
Camera Introduction ----- 1
APP Instcillcition and
Account Registration------3
How to Add a Camera to
APP ----------------------5
Charge the Battery -------9
nstallation Guides ------- 10
Notes on PIR Motion Sensor 11
FQS --------------------- 12
0 1
02
03
04
05
06
07
EN | 1
/
01 Camera Introduction
1
7
2
8
3
9
4
10
5
12
11
6
13
1.
2.
3.
7.
8.
9.
4.
5.
6.
10.
11.
12.
13.
Lens
Microphone
PIR
Power Key
Charging
Indicator
Ventilation Holes
Speaker Holes
Bracket
Base
USB Port
Reset
Working Status
Indicator
SD Card Slot
EN | 2
Power
Button Press and hold for 5s for
power on/off the camera
Reset Press and hold for 5s until
hearing 'Boogu' to reset or
restore to factory setting
SD Card
Slot Support local SD card
storage (up to 128G)
Charging
Indicator Red means charging, blue
means fully charged
Working
Status Light
Solid on red: Network is
abnormal
Slow flickering red:
Awaiting Wi-Fi connection
and start adding devices
Wi-Fi fast flickering red:
Wi-Fi connecting
Solid on blue: Wi-Fi
connected successfully,
the camera running
normally
EN | 3
/
02 APP Instcillcition and
Account Registration
Download ‘ieGeek Cam’ APP
Method 1: Download 'ieGeek Cam' or
'CloudEdge' APP from APP Store (iOS and
Android);
Method 2: Scan 'ieGeek Cam' APP QR code to
download it.
Tips: Please turn on 2 below permissions while
using this APP for the first time.
• Allow 'ieGeek Cam' APP to access mobile
cellular data and wireless LAN or it will fail
to add IP camera.
• Allow 'ieGeek Cam' APP to receive pushed
message or the phone will not receive
alarm push when motion detection or
audible alarm is triggered.
EN | 4
Note:
• When registering a new account, please
choose the region which you are actually
in and correct country code. (Different
registered regions can't share the camera.)
• Please choose to register by e-mail.
Download ‘ieGeek Cam’ APP
New users need to register by email. The
concrete steps are as following:
1) Click "Register";
2) Follow the steps to complete the
registration of the account;
3) Log in.
EN | 5
Wi-Fi Connection Steps
Before Using:
1) Please insert the Micro SD card before
power on, otherwise, the SD card cannot
be detected.
2) Put the camera and smart phone 1-3 ft
(30-100 cm) away from the router to set
Wi-Fi.
3) Make sure that the camera is using 2.4GHz
Wi-Fi.
/
03 How to Add a Camera
to APP
Tap ‘+’ to
Add Device Select Battery
Camera
EN | 6
Power on Camera
Input Wi-Fi Password
Reset Device
Scan QR Code
EN | 7
Wait for Connection Device Added
(Note: If it can't be powered on, please plug
in DC 5V 2A power adapter to charge the
camera for 15min first)
1) Please make sure the Wi-Fi the camera
connected is 2.4GHz.
2) Make sure the password correction of
the Wi-Fi. (Note: the password of the WiFi
cannot include single quote, underline,
space and virgule (/).
3) Once the devices that your router
connected excess the its max limit
numbers, other devices will cannot
connect the router.
4) Make sure the QR code on the phone
screen is normal and the distance
My camera fails to connect
Wi-Fi?
EN | 8
between the phone and the camera
lens is 10-15cm (3.9-5.9inch) during the
scanning process.
5) If the camera cannot connect the Wi-Fi,
please try to re-download the APP, reset
the camera and restart the router, and
then add the camera again.
6) If you tried all steps, but still no luck,
please message your order and problem
EN | 9
Charge the battery with a 5V 2A power
adapter
• The battery is a built-in battery and cannot
be removed.
Charging Indicator:
Red LED: Charging
Blue LED: Fully Charged
/
04 Charge the Battery
EN | 10
/
05 Installation Guides
Mounting Height:
2-3 Meters
PIR Detecting Distance:1-7Meters
• GX7S is only for indoor use, please install it
indoors according to the instructions and
keep away from water sources.
• It’s recommended to select the location
before installation. Once the 3M glue is
attached, it will not be easy to remove (to
avoid damage to the wall).
• Install the camera 2-3 meters(7-10 ft)
above ground. The detection range of the
motion sensor would be maximized at such
a height.
• For effective motion detection,please install
the camera angularly.
NOTE: If a moving object approaches the
PIR sensor vertically, the camera may fail to
detect motion.
Table of contents
Languages:
Other ieGeek Security Camera manuals
