IEI Technology IMBA-BDE User manual

1
ATX motherboard supports 14nm Intel® Xeon® D1500 family, DDR4,
VGA, dual Intel® GbE/dual Intel® 10GbE, four USB 3.0,
six SATA 6Gb/s, RoHS
IMBA-BDE
Quick Installation Guide
Version 1.0
Apr 28, 2017
Package List
IMBA-BDE package includes the following items:
1 x IMBA-BDE single board computer
1 x I/O shielding
2 x SATA cable
1 x Utility CD
1 x QIG
1 x One Key Recovery CD
©2017 Copyright by IEI Integration corp.
All rights reserved.
All manuals and user guides at all-guides.com
all-guides.com

2
Specifications
CPU:
Intel® Xeon processor D-1500 product family
BIOS:AMI BIOS
Memory:
Four 288-pin 2133 MHz dual-channel DDR4 SDRAM
unbuffered DIMMs support up to 128 GB
Display Output:
1 x VGA (up to 1920x1200@60 Hz)
Ethernet:
LAN1: Intel® I210-AT PCIe controller
LAN2: Intel® I210-AT PCIe controller
LAN3&4: Inphi CS4227 PHY (optional)
External I/O Interfaces:
1 x KB/MS
1 x RS-232
2 x USB 2.0
4 x USB 3.0
Internal I/O Interfaces:
1 x KB/MS (1x6 pin)
1 x USB 2.0 (180° Type-A)
4 x USB 2.0 (2x4 pin, P=2.54)
1 x RS-232/RS-422/485 (2x5 pin, P=2.54)
4 x RS-232 (2x5 pin, P=2.54)
6 x SATA 6Gb/s (RAID 0/1/5/10 supported)
Front Panel:
1 x Front panel (2x7 pin, power LED, HDD LED, speaker,
power button, reset button)
LAN LED: 2 x LAN LED (1x2 pin)
TPM:1 x TPM (2x10 pin)
SMBus: 1 x SMBus (1x4 pin)
All manuals and user guides at all-guides.com

3
I²C: 1 x I²C (1x4 pin)
Digital I/O: 8-bit digital I/O (2x5 pin)
Expansion :
1 x 10GbE LAN card slot (white PCIe x 8 slot)
1 x M.2 connector (M key, 2242~2280, SATA & PCIe x2
signal)
1 x PCIe x4 Gen 2 (PCIE2x4_1)
5 x PCIe x4 Gen 3
Watchdog Timer:
Software programmable supports 1~255 sec. system reset
Fan Connector:
1 x CPU smart fan (1x4 pin)
1 x System smart fan (1x4 pin)
Power supply:
ATX power supply, ATX/AT mode support
Power Consumption:3.3V@0.11A, 5V@2.83A, 12V@3.97A
(Intel® Xeon D-1548 2.0GHz CPU with 32GB (four 4 GB)
2133MHz DDR4 memory)
Operating Temperature: 0°C ~ 60°C
Storage Temperature: -10°C ~ 70°C
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 244mm x 305mm
Weight: GW: 1200g / NW: 700g
All manuals and user guides at all-guides.com

4
Ordering Information
ATX motherboard supports 14nm Intel® Xeon® D-1548, DDR4, IMBA-BDE-1548-R10:
VGA, dual Intel® GbE/dual 10GbE, four USB 3.0, six SATA 6Gb/s,
RoHS
ATX motherboard supports 14nm Intel® Xeon® D-1518, DDR4,
IMBA-BDE-1518-R10:
VGA, dual Intel® GbE/dual 10GbE, four USB 3.0, six SATA 6Gb/s,
RoHS
10 GbE LAN card, dual port support, RoHS
LAN-10G2F-PHY-CS4227:
19800-000049-RS:
LPT flat cable, 240mm, P=2.54 19800-000075-RS:
PS/2 KB/MS cable with bracket, 220mm, P=2.0
Dual port USB cable with bracket, 300mm, P=2.54
19800-003100-100-RS:
RS-232 cable with bracket, Dual 10-pin to dual DB-9, 230mm, 19800-020100-100-RS:
P=2.54
SATA power cable, MOLEX 5264-4P to SATA15P
32102-000100-200-RS:
32205-003800-300-RS:
RS-422/485 cable, 200mm, P=2.0
20-pin Infineon TPM module, software management tool, firmware
TPM-IN01-R20:
v3.17
All manuals and user guides at all-guides.com

5
Jumpers setting and connectors
LABEL FUNCTION
J_ATX_AT1 AT/ATX Mode Select Switch
JP2, JP3 Clear CMOS Button
CN4 CPU Fan Connector
12V_ATX1 +12V Power Connector
ATX1 ATX Power Connector
JDIMM1, JDIMM2,
JDIMM3, JDIMM4
DDR4 DIMM slots
DIO1 Digital Input / Output Connector
CN7 EC Debug Port Connector
JSPI1 SPI Programming Connector For System BIOS
JSPI2 SPI Programming Connector For EC
JSPI3 SPI Programming Connector For BMC
F_PANEL1 External Switches and Indicators Panel
COM3-6 Internal RS-232 Serial Port Connectors
COM2 Internal RS-422/485 Serial Port Connector
SATA0, SATA1, SATA2
SATA3, SATA4, SATA5
Serial ATA 3.0 Connectors
CN13 SMBUS Connector
J2 EC SMBUS Debug Connector
CN5 System Fan Connector
TPM1 For BIOS Bebug Only
USB1, USB2
Internal USB 2.0 Connectors
USB3
90 Degree USB 2.0 Connector
J1 8 Pin CPLD Flash Connector
COM1 External RS-232 Serial Port Connector
LAN1_USB1
RJ45 LAN and USB 3.0 Connectors
LAN2_USB2
RJ45 LAN and USB 2.0 Connectors
LAN3_USB3
USB 2.0 Connector
KBMS1
PS/2 Keyboard and Mouse Connector
VGA1 VGA Connectors
All manuals and user guides at all-guides.com

6
LAN1_USB1: Ethernet and USB 3.0 connectors
LAN1: RJ45 LAN connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 MD0+ 2 MD0-
3 MD1+ 4 MD1-
5 MD2+ 6 MD2-
7 MD3+ 8 MD3-
9 VCC 10 GND
11 LINK_ACT+ 12 LINK_ACT-
13 100- 14 1000-
15 GND
USB1: External USB 3.0 connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VBUS 2 D1-
3 D1+ 4 GND1
5 STDA_SSRX1_N 6 STDA_SSRX1_P
7 GND_DRAIN 8 STDA_STX1_N
9 STDA_STX1_P
J_ATX_AT1: AT/ATX Power Mode Setting
PIN NO.
DESCRIPTION
Short A-B
ATX Power Mode (default)
Short B-C
AT Power Mode
JP2, JP3: Clear CMOS Setup
PIN NO.
DESCRIPTION
Short 1-2 (default)
Keep CMOS Setup
(Normal Operation)
Short 2-3 Clear CMOS Setup
All manuals and user guides at all-guides.com
all-guides.com

7
KBMS1: PS/2 Keyboard and mouse connector
KBMS1 (Purple): 6-pin Mini-DIN keyboard connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 Keyboard Data 2 NC
3 GND 4 VCC
5 Keyboard Clock 6 NC
KBMS1 (Green): 6-pin Mini-DIN Mouse Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 Mouse Data 2 NC
3 GND 4 VCC
5 Mouse Clock 6 NC
LAN3_USB3: USB 2.0 Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VBUS 2 D1-
3 D1+ 4 GND1
LAN2_USB2: RJ45 LAN and USB 2.0 Connector
LAN2: RJ45 LAN connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 MD0+ 2 MD0-
3 MD1+ 4 MD1-
5 MD2+ 6 MD2-
7 MD3+ 8 MD3-
9 VCC 10 GND
11 LINK_ACT+ 12 LINK_ACT-
13 100- 14 1000-
15 GND
USB2: External USB 2.0 connectors
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 VBUS 2 D1-
3 D1+ 4 GND1
All manuals and user guides at all-guides.com

8
VGA1: VGA connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 RED 2 GREEN
3 BLUE 4 NC
5 GND 6 CRT_PLUG#
7
GND
8
GND
9 VCC 10 GND
11 NC 12 DDCDAT
13
HSYNC
14
VSYNC
15 DDCCLK
COM1: External RS-232 serial port connector
PIN NO.
DESCRIPTION
D1
DATA CARRIER DETECT
(DCD1)
D2
RECEIVE DATA
(RXD1)
D3
TRANSMIT DATA
(TXD1)
D4
DATA TERMINAL READY
(DTR1)
D5
GND
(GND1)
D6
DATA SET READY
(DSR1)
D7
REQUEST TO SEND
(RTS1)
D8
CLEAR TO SEND
(CTS1)
D9
RING INDICATOR
(RI1)
All manuals and user guides at all-guides.com

9
COM3-6: Internal RS-232 serial port connectors
Function PIN DESCRIPTION PIN DESCRIPTION
COM3
1 DCD 2 DSR
3 RXD 4 RST
5
TXD
6
CTS
7 DTR 8 RI
9
GND
10
GND
COM4
11
DCD
12
DSR
13
RXD
14
RST
15
TXD
16
CTS
17
DTR
18
RI
19
GND
20
GND
COM5
21
DCD
22
DSR
23
RXD
24
RST
25
TXD
26
CTS
27
DTR
28
RI
29
GND
30
GND
COM6
31
DCD
32
DSR
33
RXD
34
RST
35
TXD
36
CTS
37 DTR 38 RI
39 GND 40 GND
COM2: Internal RS422/485 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
RXD485#
2
RXD485+
3
TXD485+
4
TXD485#
All manuals and user guides at all-guides.com

10
CN4&5:CPU & System Fan Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+V12S
3
Rotation Signal
4
PWM Control Signal
JSPI3: SPI Programming Connector For BMC
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+V3.3M_SPI_CON
2
SPI_CS
3
SPI_SO_SW
4
SPI_CLK_SW
5
SPI_SI_SW
6
GND
JSPI2: SPI Programming Connector For EC
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 +V3.3M_SPI_CON 2 SPI_CS
3
SPI_SO_SW
4
SPI_CLK_SW
5
SPI_SI_SW
6
GND
JSPI1: SPI Programming Connector For System BIOS
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
+V3.3M_SPI_CON
2
SPI_CS
3
SPI_SO_SW
4
SPI_CLK_SW
5
SPI_SI_SW
6
GND
SATA0~5: Serial ATA 3.0 connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
5
RX-
2
TX+
6
RX+
3
TX-
7
GND
4
GND
8
N/C
All manuals and user guides at all-guides.com

11
ATX1: ATX Power Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1
+3.3V
13
+3.3V
2
+3.3V
14
-12V
3 GND 15 GND
4 +5V 16 PS_ON
5
GND
17
GND
6 +5V 18 GND
7 GND 19 GND
8
Power good
20
-5V
9 5VSB 21 +5V
10 +12V 22 +5V
11
+12V
23
+5V
12
+3.3V
24
GND
DIO1: Digital Input / Output Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
GND
2
+V5S
3
DOUT4
4
DOUT3
5
DOUT2
6
DOUT1
7
DIN4
8
DIN3
9
DIN2
10
DIN1
F_PANEL1: External Switches and Indicators Panel
PIN
DESCRIPTION
PIN
DESCRIPTION
PWR
LED
1
LED_PWR
2
BEEP_PWR
SPKR
3
NC
4
NC
5
GND
6
NC
PWR
BTN
7
PWR_BTN
8
PC_BEEP#
9
GND
10
NC
RESET
HDD
LED
11
SATA_LED+
12
RESET
13
SATA_LED-
14
GND
All manuals and user guides at all-guides.com
all-guides.com

12
TPM1: For BIOS Bebug Only
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 LCLK 2 GND
3 LFRAME# 4 KEY
5
LRERST#
6
+5V
7 LAD3 8 LAD2
9 +3.3V 10 LAD1
11
LAD0
12
GND
13 SCL 14 SDA
15 SB3V 16 SERIRQ
17
GND
18
GLKRUN#
19
LPCPD#
20
LDRQ#
CN7: EC Debug Port Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 EC_EPP_STB# 2 EC_EPP_AFD#
3 EC_EPP_PD0 4 NC
5 EC_EPP_PD1 6 EC_EPP_INIT#
7 EC_EPP_PD2 8 EC_EPP_SLIN#
9 EC_EPP_PD3 10 GND
11 EC_EPP_PD4 12 NC
13 EC_EPP_PD5 14 EC_EPP_BUSY
15 EC_EPP_PD6 16 EC_EPP_KSI5
17 EC_EPP_PD7 18 EC_EPP_KSI4
12V_ATX1: +12V Power Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 GND
3 +12V 4 +12V
All manuals and user guides at all-guides.com

13
J1: 8 Pin CPLD Flash Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 3.3V 2 CPLD_TDO
3 CPLD_TDI 4 NC
5 NC 6 CPLD_TMS
7 GND 8 CPLD_TCK
USB3: 90 Degree USB 2.0 Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VCC 2 USB_DATA-
3 USB_DATA+ 4 GND
USB1, USB2: Internal USB 2.0 connectors
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 VCC 2 GND
3 USB_DATA- 4 USB_DATA+
5 USB_DATA+ 6 USB_DATA-
7 GND 8 VCC
J2: EC SMBUS Debug Connector
PIN NO. DESCRIPTION PIN NO. DESCRIPTION
1 3.3V 2 EC_SMB_CLK
3 EC_SMB_DAT 4 GND
CN13: SMBus Connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1 GND 2 SMB_DATA
3 SMB_CLK 4 +5V
All manuals and user guides at all-guides.com

14
Board Layout: Jumper and Connector Locations
(Unit: mm)
All manuals and user guides at all-guides.com