IEI Technology Kino-9654G4 User manual

1
Mini-ITX Motherboard, Intel® Core™ 2 Extreme CPU with
VGA, Four PCIe GbE, USB 2.0 and SATAII
KINO-9654G4
Quick Installation Guide
Version 1.0
Jul 17 2007
Package List
KINO-9654G4 package includes the following items:
 1 x KINO-9654G4 single board computer
 1 x Mini Jumper Pack
 1 x ATA66/100 Flat Cable
 2 x SATA Cable
 1 x SATA Power Cable
 1 x RS-232 Cable
 1 x I/O Shielding
 1 x Utility CD
 1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
 CPU:LGA 775 Intel® Core™ 2 Extreme, Core™ 2 Quad, Core™
2 Duo, Pentium D, Celeron® D with 533/800/1066MHz FSB

System Chipset: Intel® Q965 + ICH8
 BIOS: AMI Flash BIOS

System Memory:
2 x 240-PIN Dual channel DDRII 533/667/800 MHz up to 4GB
 Ethernet: Four Broadcom BCM5787M PCIe GbE chipsets

I/O Interface:
4 x RS-232
6 x USB 2.0
2 x SATAII
1 x IDE
2 x PS2 for KB/MS
 Expansion: 1 x PCIe x16
 Digital I/O: 8 bit digital I/O, 4-bit input/ 4-bit output
 IrDA: 1 x IrDA by pin header
 Super I/O: IT8712F
 Display Interface: VGA Intgrated in Intel® Q965
 Audio:
7.1 channel HD audio kit with Realtek ALC883 codec
supports dual audio streams

Watchdog Timer: Software programmable supports 1 ~255 sec.
System reset

Power supply: ATX Power
 Power Consumption:
[email protected], 12[email protected], 3.3V@ 5.15A
(Intel® Core™2 Extreme QX6700 2.66GHz/1066MHz CPU
with 1GB DDR2 800MHz)
 Temperature: Operation:0~60°C (32~140°F)
 Humidity: Operation: 5%~90% non-condensing
 Dimension: 170mm x 170mm

Weight: GW: 1000g / NW: 400g

3
Ordering Information
 KINO-9654G4-R10
Mini-ITX Motherboard, Intel® Core™ 2 Duo CPU with VGA, Four
PCIe GbE, USB 2.0 and SATAII
 CB-USB02-RS: Dual USB Cable
 CF-520-RS: CPU Cooler
 CF-775A-RS: CPU Cooler
 SDVO-100VGA-R10: PCIe x16 VGA Output SDVO Card supports
dual display (IEI CPU board only)
 SDVO-100DVI-R10: PCIe x16 DVI Output SDVO Card supports dual
display (IEI CPU board only)
 AC-KIT-883HD-R10
7.1 Channel HD Audio Kit with Realtek ALC883 supports dual audio
streams
Jumpers setting and Connectors
J_CMOS1 : Clear CMOS Setup
J_CMOS1 DESCRIPTION
1-2
(default)*
Keep CMOS Setup
(Normal Operation)
Short 2-3 Clear CMOS Setup
COM4 : Internal Serial Port Connector
PIN DESCRIPTION PIN DESCRIPTION
1 DATA CARRIER DETECT
(DCD1)
2 DATA SET READY
(DSR1)
3 RECEIVE DATA
(RXD1)
4 REQUEST TO SEND
(RTS1)
5 TRANSMIT DATA
(TXD1)
6 CLEAR TO SEND
(CTS1)
7 DATA TERMINAL READY
(DTR1)
8 RING INDICATOR
(RI1)
9 GND
(GND1)
10 N/C

4
USB45: Internal USB Connectors
PIN DESCRIPTION PIN DESCRIPTION
1 VCC 5 GND
2 DATA- 6 DATA+
3 DATA+ 7 DATA-
4 GND 8 VCC
J_AUDIO1 : Audio Source Connector
PIN DESCRIPTION PIN DESCRIPTION
1 HDA_SYNC 2 HDA_BITCLK
3 HDA_SDOUT 4 HDA _PCBEEP
5 HDA_SDIN 6 HDA _RST#
7 +5V 8 HDA _GND
9 +12V 10 HDA _GND
PIDE1: IDE Interface Connector
PIN DESCRIPTION PIN DESCRIPTION
1 RESET# 2 GND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 DATA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GND 20 N/C
21 IDE DRQ 22 GND
23 IOW# 24 GND
25 IOR# 26 GND
27 IDE CHRDY 28 BALE – DEFAULT
29 IDE DACK 30 GND
31 INTERRUPT 32 N/C
33 SA1 34 PDIAG#
35 SA0 36 SA2
37 HDC CS0# 38 HDC CS1#
39 HDD ACTIVE# 40 GND

5
CPU_FAN1 : CPU Fan Connector
PIN DESCRIPTION
1 Ground
2 +12V
3 Rotation Signal
4 Control
SYS_FAN1: CPU Fan Connector
PIN DESCRIPTION
1 Ground
2 +12V
3 Rotation Signal
IR1: IrDA connector
PIN DESCRIPTION
1 VCC
2 NC
3 IR-RX
4 GND
5 IR-TX
DIO1 : Digital Input / Output Connector
PIN DESCRIPTION PIN DESCRIPTION
1 Ground 2 VCC
3 Output 3 4 Output 2
5 Output 1 6 Output 0
7 Input 3 8 Input 2
9 Input 1 10 Input 0
F_PANEL1 : External Switches and
Indicators panel
PIN DESCRIPTION
1 NC
2 PWR_BTN+ PWR_BTN
3 PWR_BTN-
4 HDD_LED+ HDD_LED
5 HDD_LED-
6 PWR_LED+
7 PWR_LED+
PWR_LED
8 PWR_LED-
9 RESET+ RESET
10 RESET-

6
CPU12V1 : CPU POWER Connector
PIN DESCRIPTION PIN DESCRIPTION
1 GND 2 GND
3 +12V 4 +12V
ATX24 : ATX Power Connector
PIN DESCRIPTION PIN DESCRIPTION
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 GROUND 15 GROUND
4 +5V 16 PS_ON#
5 GROUND 17 GROUND
6 +5V 18 GROUND
7 GROUND 19 GROUND
8 PWR_OK 20 -5V
9 +5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 GROUND
JSPI1: FlashSPI ROM
PIN DESCRIPTION PIN DESCRIPTION
1 SPI_VCC (+3.3V) 5 GND
2 SPI_CS# 6 SPI_CLK
3 SPI_SO 7 SPI_SI
4 NC 8 NC

7
Board Layout: Jumper and Connector Locations

8