IEI Technology KINO-9454 User manual

1
G Mini-ITX Form Factor with Intel® Core 2 Duo, Pentium D,
Pentium 4, Celeron D, CPU FSB 533/800/1066 MHz
KINO-9454
Quick Installation Guide
Version 2.12
Mar 16, 2011
Package Contents
KINO-9454 package includes the following items:
1 x KINO-9454 single board computer
1 x IDE Cable
2 x SATA Cable
1 x SATA Power Cable
1 x I/O Shielding
1 x Mini Jumper Pack
1 x Utility CD
1 x One Key Recovery CD
1 x QIG (Quick Installation Guide)
©2006 Copyright by IEI Technology corp.
All rights reserved.

2
Specifications
CPU: LGA775 Intel® Core 2 Duo, Pentium D, Pentium 4, Celeron D,
FSB 533/800/1066 MHz
System Chipset: Intel® 945G + ICH7
BIOS : AMI BIOS Label
System memory:
2 x 240-pin Dual channel DDR2 400/533/667MHz up to 4GB
Ethernet: Dual Broadcom BCM5787M GbE Chipsets (CN1 with
ASF2.0 remote control support)
I/O Interface:
8 x USB 2.0
4 x SATA II
1 x IDE
3 x RS-232,
1 x RS-232/422/485
2 x PS/2 for KB / MS
1 x 20-pin LPC (TPM header)
Expansion
1 x PCIe x16 (Support PCIe x1/x16 add on cards)
Digital I/O: 8 bit digital I/O, 4-bit input / 4-bit output
Super I/O: IT8712F
Audio: AC’97 codec with Realtek ALC655
Display: VGA integrated in Intel® 945G
WDT: Software programmable 1-255 sec. by IT8712F
Power Supply: ATX support
Power Consumption:
3.3V@0.53A , 5V@4.19A, 12[email protected], 5Vsb@ 2.31A
(Core 2 Duo E6700 2.66GHz/1066MHz CPU with 4GB DDR2 in
3DMark 2001)
3.3V@0.5A ,5V@4.41A, 12[email protected], 5Vsb@ 2.77A
(Pentium D 960 3.6GHz/800MHz CPU with 4GB DDR2 in 3DMark
2001)
Temperature: Operation: 0 ~ 60°C (32 ~ 140°F)
Humidity: Operation: 5% ~ 95% non-condensing

3
Dimension: 170 mm x 170 mm
Weight: GW: 1100g; NW: 400g
Ordering Information
KINO-9454-R21
Mini-ITX Motherboard with Intel® Core 2 Duo, Pentium D, Pentium 4,
Celeron D, CPU FSB 533/800/1066MHz, VGA, Dual Channel DDR2, Dual
GbE, 4 x SATA II, 8 x USB2.0, 4 x COM and Audio.
CB-USB02-RS: Dual USB Cable
CB-USB14-RS: Four USB Cable
19800-000110-RS: RS-232/422/485 Cable
CF-520-RS-R11: CPU Cooler
CF-775A-RS: CPU Cooler
TPM-WI01-R10: 20-pin WINBOND TPM Modules, S/W Management Tool
TPM-IN01-R10: 20-pin INFINEON TPM Modules, S/W Management Tool
Jumpers setting and Connectors
JP5: Clear CMOS Setup
PIN Description
Open Normal Operation (default)
Short Clear CMOS Setup
F_PANEL1: Front Panel Connector (2.54mm)
PIN Description PIN Description
1 Power LED+ 2 Speaker+
3 NC 4 NC
5 Power LED- 6 NC
7 Power Button- 8 Speaker-
9 Power Button+ 10 NC
11 IDE LED+ 12 Reset
13 IDE LED- 14 GROUND
JP2 : COM3 RS-232& RS-422/485 Type Select
PIN Description
1-2 RS-232 (default)
2-3 RS-422 or RS-485

4
SYSFAN1: SYSTEM Fan
Connector (2.54mm)
PIN Description
1 Ground
2 +12V
3 Rotation Signal
IDE1 (Blue): IDE Connector
PIN Description PIN Description
1 RESET 2 GND
3 DATA 7 4 DATA 8
5 DATA 6 6 DATA 9
7 DATA 5 8 D
A
TA 10
9 DATA 4 10 DATA 11
11 DATA 3 12 DATA 12
13 DATA 2 14 DATA 13
15 DATA 1 16 DATA 14
17 DATA 0 18 DATA 15
19 GND 20 N/C
21 IDE DRQ 22 GND
23 IOW# 24 GND
25 IOR# 26 GND
27 IDE CHRDY 28 GND
29 IDE DACK# 30 GND
31 INTERRUPT 32 N/C
33 SA 1 34 P66DET
35 SA 0 36 SA 2
37 HDC CS0# 38 HDC CS1#
39 HDD ACTIVE# 40 GND
CPUFAN1: CPU FAN
Connector (2.54mm)
PIN Description
1 Ground
2 +12V
3 Rotation Signal
4 Control
CPU12V1: ATX +12V Power connecto
r
PIN Description
1 Ground
2 Ground
3 +12V
4 +12V

5
COM3: Serial Port 2 x 7 Pin Header
Connector
PIN Description PIN Description
1 DCD 2 DSR
3 RXD 4 RTS
5 TXD 6 CTS
7 DTR 8RI
9 GND 10 NC
11 TX+ 12 TX-
13 RX+ 14 RX-
TPM1: TPM Connector (2.54mm)
PIN Description PIN Description
1 Clock 2 Ground
3 Frame# 4KEY
5 Reset# 6+5V
7 LAD3 8LAD2
9 +3.3V 10 LAD1
11 LAD0 12 Ground
13 SCL 14 SDA
15 +3.3V SBY 16 Serial IRQ
17 Ground 18 NC
19 Power Down# 20 DRQ#
USB1,USB2 : Dual Ports USB Connector
(2.54mm)
PIN Description PIN Description
1 USB POWER 5GND
2 DATA1- 6DATA0+
3 DATA1+ 7DATA0-
4 GND 8USB POWER
CN6: SPDIF Connector (2.54mm)
PIN Description
1 +5V
2 KEY
3 SPDIF_OUT
4 Ground
5 SPDIF_IN

6
DIO1: Digital Input / Output
PIN Description PIN Description
1 GND 2 +5V
3 Input0 4 Output0
5 Input1 6 Output1
7 Input2 8 Output2
9 Input3 10 Output3
PWR1: Power Connector
PIN Description PIN Description
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 GROUND 15 GROUND
4 +5V 16 PS-ON
5 GROUND 17 GROUND
6 +5V 18 GROUND
7 GROUND 19 GROUND
8 POWER GOOD 20 NC
9 5VSB 21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 GROUND
IR1: IRDA infrared interface (2.54mm)
PIN Description
1 VCC
2 NC
3 IR-RX
4 Ground
5 IR-TX

7
Board Layout: Jumper and Connector Locations

8