IFB Digital User manual

The user manual
USE ONLY GENUINE IFB SPARES & ACCESSORIES
* Company shall not be responsible for defects arising due to usage of spurious parts and accessories
Advancing the science of washing

3

5
CONTENTS
KNOW YOUR MACHINE.......................................................................................... 6
INSTALLATION.......................................................................................................... 7
lPre Installation
lUnpacking
lSetting up
lWater inlet
lWater outlet
lElectrical connection
USING YOUR MACHINE.......................................................................................... 9
lControl panel
lEnviromental protection / conservation issues
lBefore using your machine for the first time
lProgram selector
lOptional buttons
lDigital display
lChild lock safety provision
lAutomatic detergent dispenser tray
lKinds of wash programs
lExclusive programs
lExclusive in -built features
lProgramme chart
OPERATION............................................................................................................... 17
lSorting of garments
lLoading the machine
lDetergent to be used & quantity
lFabric conditioner
lTreatment of stains
lFabric care symbols
lCloth weights
lCheck points
lProgramming the machine
lWhen the program has ended
MAINTENANCE........................................................................................................ 21
lCoin Trap
lDrum
lSieves
lFrost protection
lDraining during emergencies
TROUBLE SHOOTING............................................................................................. 23
lWhy does it happen?
lError interpretation
SAFETY PRECAUTIONS.......................................................................................... 25
TECHNICAL DATA.................................................................................................... 26

6
Bottom Door
Special powder
coated
galvanized steel
Cabinet
Porthole Door
Control Panel
Detergent
Dispenser Tray
Top Lid

7
WATER
SUPPLY
STOP
COCK
REDUCER
MACHINE
WATER
INLET
1/2 3/4
1. Remove Carton.
2. Remove top packing cover.
3. Remove side packing and plastic jacket.
4. Remove packing from the bottom of the motor
5. Place the machine at the site at which it is to be
Installed, and put the rat mesh.
6. Remove transit bolts.
7. Insert plastic caps provided into holes vacated and press till they click into
place.
8. Keep transit bolts carefully. They will be required in case you need to shift
the machine again.
9. For shifting and re-installation at a new site, please get in touch with our
service personnel.
10. Keep packaging material carefully. It comes handy while shifting
residence.
11. PLEASE DO NOT OPERATE THE MACHINE TILL TRANSIT BOLTS
HAVE BEEN REMOVED.
SETTING UP
The machine should be levelled properly on the floor. However, it can be
installed on any suitable platform or trolley, as desired.
Install machine in a room with adequate ventilation. Avoid a room with no
windows. The back of the machine should be at least 4 inches (100 mm) away
from the wall.
1. Do not place the machine on slanting, uneven, unstable surface.
2. Level the machine by using the adjustable screws provided at the bottom
for levelling.
3. Loosen securing nut. Adjust the screw to change level. Tighten securing
nut to ensure that screw is locked into place.
4. Make sure that the machine rests on all four feet on a level surface, at all
times, to avoid vibrations during operation
5. Machine should be leveled again in case it is moved to a new site.
6. Machine is provided with ventilating openings on the base. Hence it is
always recommended to put the machine on the floor after removing the
carpet.
7. In countries where there are areas which may be subjected to infestation
by cockroaches or other insects etc, pay attention to keep the appliance &
surrounding in clean condition at at all times any damage which be caused
by cockroaches etc will not be covered by the appliance guratantee.
PRE - INSTALLATION
C
point with a 16 amp. MCB or Automatic short circuit protection
device within 1 meter of the machine. Make sure it has proper
earthing.
C
machine has a collar with 3/4” parallel internal threads. The water supply
point with an external thread3/4” parallel thread should be available
within 1 meter of the machine location. Please refer the figures (page. no.
8) under the topics WATER INLET andWATER OUTLET.
CPlease contact our service centre for installation and demonstration of the
machine after the mentioned points have been completed.
It is mandatory to have a 16 amp. 3-pin 230V AC, 50Hz electrical
Fixed plumbing is recommended for the machine. The water inlet of the

WATER INLET
DRAIN
PIPE
X
WATER INLET
DRAIN
PIPE
8
l
lConnect to a 230V, 50Hz single phase AC supply. The appliance must
be positioned so that the plug is accessible.
lMachine must be earthed properly before operation. This can be done
by using a 3 - pin plug and a properly earthed operated socket of 16
Ampere rating.
lIf the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard. It should not be stretched when connected to
the main socket.
lUse of extension cord not recommended since it may not be properly
earthed.
lUse ISI marked sockets of reputed make for preventing loose contact
of power supply cable.
lEnsure that there is a firm connection between the 3 PIN PLUG and
SOCKET, else it may result in sparking and subsequent failure of 3
pin plug.
lEnsure that L,N,E is as per the Fig. Shown
lWashing machine should always be connected to socket with 16 Amps
MCB or other automatic short circuit protection devices.
CAUTION :- The producer/Manufacturer declines any responsibility for
damage caused by failure to observe this rule. You are therefore advised to
check that your household supply has an efficient earth.
Check that the electrical line take the required load.
16 AMPS
X
N L
E

9
DIGITAL DISPLAY
DETERGENT DISPENSER TRAY
OPTIONAL BUTTONS
AND INDICATORS
ON/OFF SWITCH WITH
PROGRAMME
SELECTOR KNOB
START / PAUSE
BUTTON
SPIN SPEED
SELECTOR
BUTTON
CHILD LOCK
Start
Pause
Pre Wash
Option
Spin
Select
5kg
Delay
Start
Soak
Option
Rinse+
Option
OFF
60°CEco
Rinse + Spin
30°CQuick Wash
Drain / Spin
Synthetic
95°C
Cotton
Heavy Load 50°C
Wool 30°C
Delicates 30°C
45°C
Cold Cold
45°C
60°C
Mix 40°C
Saree 40°C

ENVIRONMENTAL PROTECTION/ CONSERVATION ISSUES
Your washing machine uses water, energy and detergent efficiently, thereby protecting the
environment and reducing your household costs.
Using your washing machine in an efficient and environmentally friendly manner:
Do not exceed recommended load.
Cottons 5.0kg
Easy-care 3.0kg
Delicates and Woollens 2.0kg
0 0
Where possible, use the 60 C Eco program instead of the 95 C Cottons program. The
0
extended washing time achieves a cleaning result comparable to the 95 C program, but uses considerably less
energy.
Avoid using the Prewash program when washing lightly to normally soiled laundry.
Add detergent according to the degree of soiling, amount of laundry and water hardness, and observe the
dertergent manufacturer’s instructions.
BEFORE USING YOUR WASHING MACHINE FOR THE FIRST TIME
Caution
The washing machine must have been installed and connected properly (refer page 7)
Your appliance was tested before leaving the factory. To remove any water left over from testing
procedures, the first washing cycle should be carried out without laundry in the machine.
Do not load any laundry.
1. Turn on water tap.
2. Pull out the detergent dispenser up to the end stop.
3. Pour approx. 1 litre of water into chamber II of the detergent dispenser.
4. Pour ½ measuring beaker of detergent into dispenser II. Do not use any special detergents for delicates or
woollens (excessive foam).
5. Close the detergent dispenser.
0
6. Set the programme selector to 95 C cottons.
7. Press the Start button.
8. when the End message is displayed Turn the programme selector to OFF.
10

OFF
60°CEco
Rinse + Spin
30°CQuick Wash
Drain / Spin
Synthetic
95°C
Cotton
Heavy Load 50°C
Wool 30°C
Delicates 30°C
45°C
Cold Cold
45°C
60°C
Mix 40°C
Saree 40°C
11
Pre Wash
Option
PROGRAM SELECTOR
The program selector is used to choose the desired program. The knob can be rotated in both
clockwise and anti-clockwise directions.
The time required to complete the selected program will be shown on the digital display.
A choice of 15 basic programs is available according to the fabric being washed and extent of
soilage. For more details please refer the topic “Kinds of wash programs”.
Program selection should be done before pressing the “Start/Pause” button.
Attention: To choose a different program during program run of the machine, switch
off the machine, wait for few seconds and then select a new program.
If the selector is rotated during program run, PXX ( XX will be 01 for Cotton Cold, 02
for Cotton 45......., 15 for Synthetic Cold ) will be shown on the display alternatively with
the balance time till it is brought back to the original position.
OPTIONALBUTTONS
The program selected can be further supplemented by choosing the various options available
as listed below.
After the machine is powered ON, available options to a program will be shown by the flashing
of the corresponding LED of the optional button. Non-flashing LED’s refer to the non-
applicable options to that program. Default selected option will be indicated by the glow of
LED.
With the selection of optional buttons, the total time required for washing is automatically
readjusted and can be viewed on the digital display.
PRE WASH OPTION
If pre wash option is selected, the clothes are given a preliminary wash before the main wash.
Useful for the Cotton / Synthetic clothes which are highly soiled, stained, long wearing like
outdoor sports wear, kitchen wear, jeans etc.
When chosen, the detergent is to be filled in compartment marked I of the detergent dispenser
tray.
At the end of the pre wash, the dirty water is pumped out automatically.
SOAK OPTION
Soaks clothes in soapy water for a calculated amount of time to dislodge dirt particles from the
clothes during main wash cycle.After this, it automatically continues with the normal cycle.
Useful for Cotton / Synthetic clothes which are highly soiled or stained (blood / sweat / tea /
coffee / chemicals etc).
RINSE+ OPTION
An additional rinse cycle is executed to remove any left over detergent on the clothes to give a
better feel to the fabric.
Useful in places of soft water or for highly soiled clothes or for rinsing delicate fabrics, net
curtains etc.
DELAY START
If you desire to delay the start of the program choose ‘Delay Start’option.
Each press advances ‘Delay Start’ by an hour (60 minutes). Initially ‘0h’ will be shown on the
display. If the button is kept pressed continuously, the Delay Start gets incremented at a faster
rate.
The Delay Start can be set from 1 hour to 24 hours. When Delay Start is set, the Delay Start
LED will glow.
To set the Delay Start, Select the program and options Press Delay Start button till
desired delay time is displayed Press Start button. The non-selected applicable options
will continue flashing till delay time is over. They can be selected / deselected by pressing the
corresponding button.
The time delay set will start decreasing the time and the balance delay time on the display is
updated every one hour. For the final one hour, the time will be decremented in minutes. After
time delay is over, the washing machine will automatically start the chosen program and time
required for completing the chosen program would be displayed, and the Delay Start LED will
turn off.
To cancel the “Delay Start” option when the machine is in Delay Start mode, Press
“Start/Pause” button.
Delay Start does not proceed during power failure.
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
è
è
Soak
Option
Rinse+
Option
Delay
Start

12
SPIN SELECT
When Spin Select button is pressed, default speed will be shown on the display along with
the “ ” symbol. Spin speed selection sequence will be Default speed (DS ) DS-
100rpm DS - 200rpm....... 400rpm > No final Spin ( 0 rpm ) Rinse Hold
Default Speed ...
To select ‘No final spin’, press the Spin Select button till the value ‘0’ is shown on the
Display.
When ‘No final spin’is selected, the machine will not spin during final spinning operation.
Spin speeds between 400 rpm to 900-rpm max. can be selected by pressing the button.
The maximum spin speeds are automatically limited to the following for better fabric care.
Program Maximum spin speed (rpm)
Cotton, Eco, Quick Wash, Heavy load 900
Synthetic, Mix 800
Delicates, Wool, Saree 600
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
è
è è
è è
Rinse Hold
Rinse hold option will prevent clothes from creasing by holding them in water before
final spin.
During the Rinse hold stage, the Spin Select button LED will flash & the program can be
continued further to either drain out the water or spin the clothes.
To do this, Set the Spin Select button to ‘0’or desired spin speed èPress Start
In addition to “Rinse Hold” option, an inbuilt anti-crease action of tumbling takes place
after final spin to reduce creasing.
START/PAUSE
After choosing the desired program and options press this button to start the program. Keep
Start/ Pause button pressed for 1 second to enter pause state.
To change the program during the machine run, Press Pause button èSwitch OFF the
machine èSwitch ON èSelect a new program.
To select / deselect the options during the program run, Press Pause button èChange the
options èPress Start button.
Pause mode is indicated by the simultaneous flashing of “Clock symbol” and balance
time on the display.
INBUILTANTICREASE
In order to reduce the wrinkles on the laundry after final spin cycle, the machine is provided
with an ‘InbuiltAnticrease’feature.
Subsequent fluffing of the clothes will be done thereby it helps you to unload the laundry
from the drum with ease!
NOTE:
1. To open the door during program run, pause the machine and the door will get
opened after a delay of 1 - 2 minutes.
2. To prevent any untoward incidents to you, additional protection is provided in
which the door cannot be opened even if paused when the water temperature in the
0
drum is above 50 C or if the water level inside the drum is high or if the washing
machine is in spinning operation.
Spin
Select
Start
Pause

II I
DIGITALDISPLAY
The digital display gives you the complete information while setting of the program,
balance time of the program, fault indications if any etc.
If you have chosen “child lock” option, then “CH” will be displayed.
If the washing machine encounters a problem during program run then the corresponding
error code will be displayed. For further details, please refer the topic ‘Trouble shooting’
CHILD LOCK SAFETY PROVISION
You can safeguard your washing machine to prevent any unintentional changes to the
selected options and to the program sequence by activating Child lock feature.
To activate “Child lock” feature press “Soak Option” and “Delay Start” buttons
simultaneously. The Display of “CH” message on the display indicates that the Child lock
option is activated. Child lock is to be set after starting the program.
Child lock feature makes all the functional buttons inoperative.
To deactivate the child lock, press the same two buttons simultaneously. “CH” message will
disappear.
If child lock is opted, it has to be disabled to make any changes in the options during program
run.
AUTOMATIC DETERGENT DISPENSER TRAY
Designed for automatic dispensing of detergent & additives as required which avoids manual
filling at each stage. The detergent dispenser tray should be filled with detergent & additives
before the start of a program. The tray has three chambers
1. Pre wash chamber: (Marked –I) To be filled with detergent in case a pre wash
program has been chosen.
2. Main wash chamber: (Marked –II) To be filled with detergent for every wash
program.
3. Fabric conditioner additive chamber: To be used for additives
only. It should be filled as per instructions mentioned in the topic “operation”.
The detergent tray must be pulled out, filled as required and shut before the machine is switched
ON.
l
l
l
l
l
l
l
l
on
page 23.
(Marked “ “)
13

KINDS OF WASH PROGRAMS
IFB Digital washing machine provides you number of combination of main programs and options to get wash quality to your
satisfaction.
To select the right program, you should know the basic group of wash programs.
0 0
1. Cottons - Cold, Mild ( 45 C),Warm ( 60 C), Hot ( 95°C)
The washing action is more vigorous/gentle for a longer duration to clean clothes better.
To be used for whites, cottons and coloreds, average soiled cottons, bed sheets, curtains, under garments, towels, shirts,
trousers etc.
Not to be used for Woolens and Delicate fabrics.
Selectable additional options:
Pre wash option, Soak option, Rinse+ option, Rinse hold, No final spin
2. Eco Wash - 60°C
This gives an environmental friendly and energy saving operation of washing.
In this program, the mechanical tumbling action during wash is increased in such a way that at lower temperature and
power consumption, the same quality of wash is achieved as that with high temperature & less mechanical action.
This program can be used for washing heavily soiled Cotton/Synthetic clothes such as whites, cottons and coloreds, bed
sheets, curtains, towels, shirts, trousers.
Selectable additional options:
Pre wash option, Soak option, Rinse+ option, Rinse hold, No final spin
0
3. Quick Wash - 30 C
Useful for washing the laundry which is very lightly soiled like once worn/ daily wear garments.
Selectable additional options:
Rinse hold, No final spin
0
4. Heavy Load - 50 C
Useful for washing heavily soiled garments like jeans, bedsheets, curtains, etc.
Selectable additional options:
Prewash option, Soak option, Rinse+ option, Rinse hold, No final spin
5. Delicates - 30°C
The washing action is less vigorous/gentle for a shorter duration.
To be used for washing sensitive easy care fabrics like skirts, blouses, shirts, net curtains, mixed fibre fabrics or Turkish
towels.
Selectable additional options:
Rinse+ option, Rinse hold, No final spin
6. Wool - 30°C
The washing action is very gentle for a short duration.
Most suitable for washing hand washable fabrics or machine washable fabrics made from wool or wool blend.
Selectable additional options:
Rinse+ option, Rinse hold, No final spin.
7. Mix - 40°C
Suitable for easycare textiles and laundry made of cotton-different types of fabric can be washed together.
Selectable additional options:
Prewash option, Soak option, Rinse+ option, Rinse hold, No final spin
8. Saree - 40°C
Suitable for washing Cotton/Synthetic sarees.
Selectable additional options:
Soak option, Rinse+ option, Rinse hold, No final spin
l
l
l
l
l
l
l
l
l
l
l
l
l
l
14

15
EXCLUSIVE IN-BUILT FEATURES:
AUNIQUE SHOWER SYSTEM:
Scoops on the inner drum pick up water and shower through perforated fins on
the laundry as the drum rotates. This ensures a thorough wetting of the laundry,
What’s more, the process requires less water and thus less energy to heat it.
COOLDOWN CYCLE:
Hot water drained after main wash cycle can be harmful for people and environment. Hot water is cooled down by taking
additional cold water automatically, which also reduces the concentration of detergent, thus ensuring better rinsing efficiency
and Eco friendly environment. The cool down cycle takes place only if the temperature of water inside the washing machine is
high thus saving water.
UNBALANCE DETECTION & CORRECTION:
If the wash load is very much unbalanced, the washing machine will try to distribute for balancing the load inside the drum. In
this process, the washing machine will stop in between and try to distribute the load. Some times the washing machine will spin
at lower spin speeds to reduce stresses on the dynamic parts of washing machine. This in turn will increase the life of the
mechanical components of washing machine.
BUILT IN MEMORY:
The washing machine has an inbuilt memory thus ensuring the machine will start from the same point where it had stopped, on
resumption of power supply.
9. Synthetics - Cold, Mild ( 45°C )
The washing action is less vigorous/gentle for a shorter duration.
To be used for easy care fabrics made from Cotton, Synthetics, lightly soiled blouses, shirts etc made of polyester or
similar blends.
Selectable additional options:
Pre wash option, Soak option, Rinse+ option, Rinse hold, No final spin.
EXCLUSIVE PROGRAMS
1. Drain/ Spin
This program is used for draining out the water from the washing machine or squeezing out water from hand
washed/rinsed items.
Maximum pin peed upto 900 can be chosen.
To select “Drain” program press pin button till “0” rpm is displayed
Selectable additional options: No final spin
2. Rinse + Spin
Exclusive rinse cycles with subsequent spin cycle and suitable for rinsing hand-washed items.
Maximum spin speed upto 900 rpm can be chosen.
Selectable additional options:
Rinse hold, No final spin
l
l
l
lS S rpm
lS Select
l
l

PROGRAMME CHART
Programme Maximum load Programme* Water* Energy*
(kg) duration (min) consumption (litres) consumption (kWh)
Cotton Cold 5 kg. Max 88 70 0.15
0
Cotton Mild - 45 C ” 91 70 0.4
0
Cottton Warm - 60 C ” 106 70 0.6
0
Cotton Hot - 95 C ” 117 80 1.7
0
Eco - 60 C ” 106 55 0.6
0
Quick Wash - 30 C 3 kg Max. 36 35 0.05
Synthetic Cold ” 80 65 0.12
0
Synthetic Mild - 45 C ” 83 65 0.4
0
Delicate 30 C 2 kg. Max 39 45 0.05
0
Saree - 40 C ” 75 55 0.3
0
Wool 30 C 2 kg. Max 39 45 0.05
Rinse + Spin - 33 30 0.05
Drain / Spin - 2/16 _ - /0.03
0
Mix - 40 C 3 kg Max 88 55 0.3
0
Heavy Load - 50 C 3 kg Max 101 55 0.5
* - Program duration and consumption values can differ from the indicated values depending on the water pressure, water hardness, water inlet temperature,
ambient temperature, type and quantity of load, degree of soiling, variations in the input power supply etc.
16

17
Only machine washable fabrics should be washed in the machine ( look for
wash symbols given on your garments ).

18
DETERGENT TO BE USED AND QUANTITY
•The best washing results will be achieved by using the correct dosage of detergent .
•Use the detergent as per the instructions on the detergent packaging, However the dosage need to be adjusted during
usage to avoid effects of inadequate/excess detergent as mentioned below.
•Use liquid detergent dispenser tray ( Optional ) while using liquid detergent. It is not to be used for powder detergent.
•Pour the liquid detergent into the detergent dispenser tray and place the tray in the main wash chamber (Marked - II) of
the detergent dispenser tray before the start of the program.
•The quantity of detergent will depend on
a. Quantity of clothes being washed
b. Degree of soilage of clothes
c. Water hardness
•Hard water and heavily soiled clothes require more, while less soiled clothes requires less then recommended
quantity of detergents.
•Do not use dry cleaning agents.
•Frequent use of insufficient detergent will be noticeable as follows:
a. Washing appears grey or not properly clean
b. Grey/brown stains appear on the clothes
•Excess use of detergent will result in
a. Higher environmental pollution
b. Generation of too much foam
c. Building up of scales
d. Poor rinse quality
e. Less drying efficiency
f. Reduction in life of the Components.
FABRIC CONDITIONER
• Fabric softener, Whitening, Enzyme, Disinfectants, Bleaching, etc.
• Fill in the middle chamber of detergent dispenser tray marked .
• Conditioner should be in liquid/solution form only (powders to be mixed in water)
• Fabric softener gives a soft feel and smooth surface to fabrics.
• Whitener gives ‘Whiteness’ to white clothes and brightness to coloured clothes.
• Enzymes help to remove stains of sweat, blood etc.
• Chlorine bleach is used for white clothes and oxygen bleach is used for coloured clothes.
• A strong bleaching agent is not recommended for direct use in the washing machine.
• Extremely dirty areas in clothes can be pretreated with bleach and then to be loaded in the machine for a
regular wash.
TREATMENT OF STAINS
•Stains need to be treated immediately while they are fresh. Usually stains are categorized as absorbed stains, builtup
stains, and compound stains.
•Absorbed stains can be removed by rubbing gently a pad containing a suitable solvent over the stain from outer edge
towards centre by keeping stained cloth on absorbent fabric.
•Built up and compound stains may be removed by first carefully brushing off stained area. Then rub gently with pad
containing solvent from the back of fabric.
•It is advisable to try out the solvent on hidden part of the garment to verify its effect on clothes.
FABRIC CARE SYMBOLS
0
WASHING SYMBOLS WASH TEMP MAX C ACTION
95, 60, 40 Normal
30 Gentle
Do not machine -wash Handwash
Do not wash in water

19
IRONING

20
CHECK POINTS:
Before switching your machine ‘ON’check if …..
The power supply plug is connected to a 230 V, 50 Hz supply with proper earthing.
The water inlet stopcock is fully open.
The inlet and exhaust hoses are straight and free from twist.
The coin trap is closed firmly and exhaust pipe is connected to drain.
PROGRAMMING THE MACHINE:
1. Switch ON the mains supply.
2. Rotate the programmer knob to the desired program.
3. Set the final spin speed required.
4. Select the options preferred for the chosen program from the flashing options. After selection, the indicator light of
the chosen options will glow.
The chosen options can be deselected by pressing the button again.
Non-flashing options indicate that they are not applicable for the corresponding program.
5. Open the door and load the clothes inside the drum.
6. Put the detergent in the respective chamber.
7. Press the “Start/Pause” button to start the washing cycle. Flashing of optional button indicator lights will turn OFF.
8. If required enable the ‘Child lock’feature to prevent any tampering of program.
9. To change the options, Pause the machine Select / Deselect the options Press Start button. The machine will
acknowledge the changes done automatically.
10. To change / cancel the program during the machine run, Press Pause button èSwitch OFF the machine èSwitch
ON èSelect a new program
11. Washing, Soaking, Rinsing & Spinning can be seen through the porthole door.
12. The time remaining to complete the washing cycle can be seen on digital display at any time during washing.
SWITCHING OFFTHE MACHINE:
At the end of the program “End” message will be shown on the digital display.
Open the door by pulling the door handle to remove the clothes from the machine
Switch OFF the machine by rotating the program selector knob to “OFF” position.
Leave door slightly ajar to dry out the inside of the machine
l
l
l
l
l
l
l
è è

21
Drain hose
Drain plug
Container
2
3
Open the detachable bottom door by
pressing the top portion of it.
DO NOT OPEN THE COIN TRAP DURING
A PROGRAMME RUN.

22
Drain Hose
Drain Plug
Container
Never leave metal items e.g. paper clips, safety pins etc. in the drum as it
creates superficial rust marks in drum. If there are any rust stains remove with
a non-chlorine agent. Special non-metal sponges (never use steel wool ) may
also be used.