IFB Senorita Dx User manual

The user manual
USE ONLY GENUINE IFB SPARES & ACCESSORIES
* Company shall not be responsible for defects arising due to usage of spurious parts and accessories
Advancing the science of washing
SENORITA DX

3

5
CONTENTS
KNOW YOUR MACHINE.......................................................................................... 6
INSTALLATION.......................................................................................................... 7
?
?Unpacking
?Setting up
?Water inlet
?Water outlet
?Electrical connection
USING YOUR MACHINE.......................................................................................... 9
?Control panel
?Enviromental protection / conservation issues
?Before using your machine for the first time
?Program selector
?Optional buttons
?Child lock safety provision
?Automatic detergent dispenser tray
?Kinds of wash programs & Options available
?Exclusive programs
?Exclusive in -built features
?Programme chart
OPERATION............................................................................................................... 16
?Sorting of garments
?Loading the machine
?Detergent to be used & quantity
?Fabric conditioner
?Treatment of stains
?Fabric care symbols
?Cloth weights
?Check points
?Programming the machine
?When the program has ended
MAINTENANCE........................................................................................................ 20
?Coin Trap
?Drum
?Sieves
?Frost protection
?Draining during emergencies
TROUBLE SHOOTING............................................................................................. 22
?Why does it happen?
?Error interpretation
SAFETY PRECAUTIONS.......................................................................................... 25
TECHNICAL DATA.................................................................................................... 26
Pre Installation

6
Adjustable Feet
for Levelling
EN
ID X
SO TA
RELU
ik
Qu
c
c
Eo
Dra n
i
e+
np
Ri n
s i
S
e
D
i
la e
t s
c
e
Md
x
i
y
a Ca
Es re to
Co t n°C
d
o
C l
0
4
3
0
o
Cld
ff
O
0
6
0
3
0
4
6
0
9
5
0
4
0
6
c
Ae
v
ti
nd
E
ok
Cdc
l
hl
i
pn
Si
t a
St s
rue
a/P
Door
u
t
S a
ts
s
a
Wh
Pr
e
e
i
Rs
n
l
o
H d
0
3
o
W
l o
Bottom Door
Special powder
coated
galvanized steel
Cabinet
Porthole Door
Control Panel
Detergent
Dispenser Tray
Top Lid
Interlocking Door
Lock Handle
Program Selection
Knob

7
WATER
SUPPLY
STOP
COCK
REDUCER
MACHINE
WATER
INLET
1/2 3/4
1. Remove Carton.
2. Remove top packing cover.
3. Remove side packing and plastic jacket.
4. Remove packing from the bottom of the motor
5. Place the machine at the site at which it is to be
Installed, and put the rat mesh.
6. Remove transit bolts.
7. Insert plastic caps provided into holes vacated and press till they click into
place.
8. Keep transit bolts carefully. They will be required in case you need to shift
the machine again.
9. For shifting and re-installation at a new site, please get in touch with our
service personnel.
10. Keep packaging material carefully. It comes handy while shifting
residence.
11. PLEASE DO NOT OPERATE THE MACHINE TILL TRANSIT BOLTS
HAVE BEEN REMOVED.
SETTING UP
The machine should be levelled properly on the floor. However, it can be
installed on any suitable platform or trolley, as desired.
Install machine in a room with adequate ventilation. Avoid a room with no
windows. The back of the machine should be at least 4 inches (100 mm) away
from the wall.
1. Do not place the machine on slanting, uneven, unstable surface.
2. Level the machine by using the adjustable screws provided at the bottom
for levelling.
3. Loosen securing nut. Adjust the screw to change level. Tighten securing
nut to ensure that screw is locked into place.
4. Make sure that the machine rests on all four feet on a level surface, at all
times, to avoid vibrations during operation
5. Machine should be leveled again in case it is moved to a new site.
6. Machine is provided with ventilating openings on the base. Hence it is
always recommended to put the machine on the floor after removing the
carpet.
7. In countries where there are areas which may be subjected to infestation
by cockroaches or other insects etc, pay attention to keep the appliance &
surrounding in clean condition at at all times any damage which be caused
by cockroaches etc will not be covered by the appliance guratantee.
PRE - INSTALLATION
C
point with a 16 amp. MCB or Automatic short circuit protection
device within 1 meter of the machine. Make sure it has proper
earthing.
C
machine has a collar with 3/4” parallel internal threads. The water supply
point with an external thread3/4” parallel thread should be available
within 1 meter of the machine location. Please refer the figures (page. no.
8) under the topics WATER INLET andWATER OUTLET.
CPlease contact our service centre for installation and demonstration of the
machine after the mentioned points have been completed.
It is mandatory to have a 16 amp. 3-pin 230V AC, 50Hz electrical
Fixed plumbing is recommended for the machine. The water inlet of the

WATER INLET
DRAIN
PIPE
X
WATER INLET
DRAIN
PIPE
8
l
lConnect to a 230V, 50Hz single phase AC supply. The appliance must
be positioned so that the plug is accessible.
lMachine must be earthed properly before operation. This can be done
by using a 3 - pin plug and a properly earthed operated socket of 16
Ampere rating.
lIf the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person in
order to avoid a hazard. It should not be stretched when connected to
the main circuit.
lUse of extension cord not recommended since it may not be properly
earthed.
lUse ISI marked sockets of reputed make for preventing loose contact
of power supply cable.
lEnsure that there is a firm connection between the 3 PIN PLUG and
SOCKET, else it may result in sparking and subsequent failure of 3
pin plug.
lEnsure that L,N,E is as per the Fig. Shown
lWashing machine should always be connected to socket with 16 Amps
MCB or other automatic short circuit protection devices.
CAUTION :- The producer/Manufacturer declines any responsibility for
damage caused by failure to observe this rule. You are therefore advised to
check that your household supply has an efficient earth.
Check that the electrical line can take the required load.
16 AMPS
X
N L
E

SENORITA DX
Quick
Eco
Drain
Rinse + Spin
Delicates
Mixed
Easy Care Cotton °C
Cold
40
30
Cold
Off
60
30
40
60
95
40
60
Active
End
Child lock
Spin
Start/Pause
Door
Status
Wash
Pre
Rinse
Hold
DETERGENT DISPENSER TRAY
ON/OFF SWITCH WITH
PROGRAMME
SELECTOR KNOB
CHILD LOCK
30
Wool
9

ENVIRONMENTAL PROTECTION/ CONSERVATION ISSUES
Your washing machine uses water, energy and detergent efficiently, thereby protecting the
environment and reducing your household costs.
Using your washing machine in an efficient and environmentally friendly manner:
Do not exceed recommended load.
Cottons 5.5kg
Easy-care 3.0kg
Delicates and Woollens 2.0kg
0 0
Where possible, use the 60 C Eco program instead of the 95 C Cottons program. The
0
extended washing time achieves a cleaning result comparable to the 95 C program, but uses considerably less
energy.
Avoid using the Prewash program when washing lightly to normally soiled laundry.
Add detergent according to the degree of soiling, amount of laundry and water hardness, and observe the
dertergent manufacturer’s instructions.
BEFORE USING YOUR WASHING MACHINE FOR THE FIRST TIME
Caution
The washing machine must have been installed and connected properly (refer page 7)
Your appliance was tested before leaving the factory. To remove any water left over from testing
procedures, the first washing cycle should be carried out without laundry in the machine.
Do not load any laundry.
1. Turn on water tap.
2. Pull out the detergent dispenser up to the end stop.
3. Pour approx. 1 litre of water into chamber II of the detergent dispenser.
4. Pour ½ measuring beaker of detergent into dispenser II. Do not use any special detergents for delicates or
woollens (excessive foam).
5. Close the detergent dispenser.
0
6. Set the programme selector to 95 C cottons.
7. Press the Start button. Door LED will glow Red once the door is locked.
8. When the End LED glows, Turn the programme selector to Off.
10

PROGRAM SELECTOR
The program selector is used to choose the desired program. The knob can be rotated in both
clockwise and anti-clockwise directions. The knob should be rotated slowly one step at a time.
A choice of 15 basic programs is available according to the fabric being washed and extent of
soilage. For more details please refer the topic “Kinds of wash programs”.
Program selection should be done before pressing the “Start/Pause” button.
Attention: To choose a different program during program run of the machine, switch
off the machine, wait for few seconds and then select a new program.
OPTIONALBUTTONS
After the machine is powered on, available options to a program will be shown by flashing of
the corresponding led of the optional button. non flashing led’s refer to non applicable options
to that program. default selected options will be indicated by the glowing of the
led.
With the selection of optional buttons, the total time required for washing is automatically
readjusted
Start / Pause LED (Dual colour ) will flash Green before program start, and will glow Red when
program started
PRE WASH OPTION
Useful for the Cotton / Synthetic clothes which are highly soiled, stained, long wearing like
outdoor sports wear, kitchen wear, jeans etc.
When chosen, the detergent is to be filled in compartment marked I of the detergent dispenser
tray.
At the end of the ewash, the dirty water is pumped out automatically
Prewash can be selected by pressing th button Led glowing is an indication that the option
is selected.
SPIN SPEED
Program Max. Spin Speed (RPM)
Cotton, Eco, Quickwash, Easycare, Rinse+Spin 800
Spin 800
Delicate, Wool 600
l
l
l
lThe program selected can be futher supplemented by chosing the various option available as
listed below
l
/selected option
l
l
and will switch off at the end of the program and will flash red in pause mode.
lIf pre wash option is selected, the clothes are given a preliminary wash before the main wash.
l
l
lPr .
lis
lIf the clothes are left unattended after final spin for a long time it will increase the creases on
the clothes.
lIn order to minimize the creases,
lA
l
RINSE HOLD
Rinse hold option has to be selected which will prevent
clothes from creasing by holding them in water before final spin.
t rinse hold step LED will flash
During the Rinse hold stage, the programm will halt start pause red LED will flash & active
LED will glow.
11
Quick
Eco
Drain
Rinse + Spin
Delicates
Mixed
Easy Care Cotton °C
Cold
40
30
Cold
Off
60
30
40
60
95
40
60
Spin
30
Wool
Wash
Pre
Rinse
Hold

Start / Pause
II I
TA
SRT/PAUSE
After choosing the desired program and options, press this button to start the
pa a a rrogram. Start/P use Led will glow red to indicate that the progr m h s sta ted.
Ps t S/ef h
Press Start/ au e button once to enter pause sta e, tart Paus Led will las red in
pause mode.
g
To change the program durin the machine run, Press Pause button èSwitch OFF the
aieè
c
m ch n Swit h ON èSelect a new program.
cr , s oTo sele t / deselect the options du ing the program run Press Pau e butt n èChange the
options è
Press Start button.
m d i
Pause ode is indicate by the flash ng of start pause red LED
I
DOOR ndication
s b . n
Fla hes Red if door opening is availa le wait till it glows Gree .
b d
Door can e opened only when the door Le glows Green.
E oarNOT :
Additi n of load fter sta ting the program.
pp, r
1. To o en the door during rogram run pause the machine. Doo Led will flash Red
n
only if door ope ing is available, if not it will glow red.
The door will get opened after
G
a delay of 1 - 2 minutes. Door Led will glow reen.
c t
2. To prevent any untoward in idents to you, additional pro ection is provided in which
f n
the door cannot be opened even i paused when the water temperature i the
0el s
drum is above 60 C or if the wat r evel inside the drum is high or if the wa hing
nn
machine is in spin ig operation.
L F YCHILD OCK SA ET PROVISION
Y s e s t
ou can safeguard your wa hing machin to prevent any unintentional changes to the elec ed
ioptions and to the program sequence by activating Ch ld lock feature.
“” a resTo activate Child lock fe ture p ess “Pr wash/” and “rinse hold” button simultaneously.
rofo about 3 sec. Child lock can be activated nly after starting the program.
dcu l tl a
Chil lo k feat re makes all the functiona bu tons inoperative. When chi dlock is activ ted
childlock led will glow
To deactivate the child lock, press the same two buttons simultaneously for about 3sec. child
lock LED will go OFF
sunt
If child lock is opted, it ha to be disabled to Pa se and make a y changes in he options
d
uring program run, or after end of the program for opening the door.
RAUTOMATIC DETE GENT DISPENSER TRAY
a v r iDesigned for utomatic dispensing of detergent & additi es as equired which avo ds manual
ih T t
flling at eac stage. he detergent dispenser tray should be filled with detergent & addi ives before
tme
the star of a program.
The tray has three cha b rs
1In s. Pre wash chamber: (Marked – ) To be filled with detergent ica e a pre wash
program has been chosen.
d f
2. Main wash chamber: (Marked –II) To be fille with detergent or every wash
rprog am.
rbb3. Fabric conditione additive cham er: To e used for additives only.
i e o
It should be filled as per nstructions mention d in the topic “ peration”.
eln
Th detergent tray must be pulled out, fil ed as required a d shut before the machine is switched
ON
lt s e r
At power on s art Start/Pause Led will fla h gre n indicating that the prog am has not
started.
l
l
l
l
t, rlA the end of the program Sta t/Pause Led will go off.
ooe
l
Glows Red when do r is lck d
loption
l
l
l
l
l
l
(Marked “ “)
Press
Door
Status
12

KINDS OF WASH PROGRAMS & OPTIONS AVAILABLE
IFB Digital washing machine provides you number of combination of main programs and options to get wash quality to your
satisfaction.
To select the right program, you should know the basic group of wash programs.
1. Cottons - Cold, 40, 60, 95.
The washing action is more vigorous/gentle for a longer duration to clean clothes better.
To be used for whites, cottons and coloreds, average soiled cottons, bed sheets, curtains, under garments, towels, shirts,
trousers etc.
Not to be used for Woolens and Delicate fabrics.
Selectable additional options:
Pre wash option, Rinse Hold.
2. Eco Wash - 60°C
This gives an environmental friendly and energy saving operation of washing.
In this program, high mechanical tumbling action and extended washing time gives a cleaning result comparable to that
of 95deg. Program but uses considerably less energy.
This program to be used only for washing stained, heavily soiled Cotton clothes such as whites, and coloreds, bed
sheets, shirts, trousers.
Selectable additional options:
Rinse Hold.
0
3. Quick Wash - 30 C
Useful for washing the laundry which is very lightly soiled like once worn/ daily wear garments.
Selectable additional options:
Rinse Hold.
0
4. Delicates - 30 C
The washing action is less vigorous/gentle for a shorter duration.
To be used for washing sensitive easy care fabrics like skirts, blouses, shirts, net curtains, mixed fibre fabrics or Turkish
towels.
Selectable additional options:
Rinse Hold.
5. Wool - 30°C
The washing action is very gentle for a short duration.
Most suitable for washing hand washable fabrics or machine washable fabrics made from wool or wool blend.
Selectable additional options:
Rinse Hold.
6. Mixed 40°C
Different types of fabric can be washed together
Selectable additional options:
Pre wash option, Rinse Hold.
l
l
l
l
l
l
l
l
l
l
l
13

EXCLUSIVE IN-BUILT FEATURES:
AUNIQUE SHOWER SYSTEM:
Scoops on the inner drum pick up water and shower through perforated fins on
the laundry as the drum rotates. This ensures a thorough wetting of the laundry,
What’s more, the process requires less water and thus less energy to heat it.
COOLDOWN CYCLE:
Hot water drained after main wash cycle can be harmful for people and environment. Hot water is cooled down by taking
additional cold water automatically, which also reduces the concentration of detergent, thus ensuring better rinsing efficiency
and Eco friendly environment. The cool down cycle takes place only if the temperature of water inside the washing machine is
high thus saving water.
UNBALANCE DETECTION & CORRECTION:
If the wash load is very unevenly distributed, the washing machine will try to distribute for balancing the load inside the drum.
In this process, the washing machine will stop in between and try to distribute the load. Some times the washing machine will
spin at lower spin speeds or no spin for safety reasons and to reduce stresses on the dynamic parts of washing machine. This in
turn will increase the life of the mechanical components of washing machine. program duration may vary under such
conditions.
BUILT IN MEMORY:
The washing machine has an inbuilt memory thus ensuring the machine will start from the same point where it had stopped, on
resumption of power supply,excluding certains steps where redistribution of clothes is necessary.
7. Easy Care60/40, Easy Care Cold
The washing action is less vigorous/gentle for a shorter duration.
To be used for easy care fabrics made from Cotton, Synthetics, lightly soiled blouses, shirts etc made of polyester or
similar blends.
Selectable additional options:
Pre wash option, Rinse Hold.
EXCLUSIVE PROGRAMS
1. Drain
This program is used for draining out the water from the washing machine or squeezing out water from hand
washed/rinsed items.
2. Spin : use to dry your clothes.
3. Rinse + Spin
Exclusive rinse cycles with subsequent spin cycle and suitable for rinsing hand-washed items.
Maximum spin speed is 800 rpm (by default)
Selectable additional options:
Rinse hold, No final spin
l
l
l
l
l
14

PROGRAMME CHART
Programme Maximum load Programme* Water*(minimum)
(kg) duration (min) consumption (litres)
Cotton Cold 5.5 kg. Max 104 57
0
Cotton 40 C ” 107
0
Cottton 60 C ” 122 57
0
Cotton 95 C ” 133 57
0
Eco - 60 C** ” 131 48
0
Quick Wash - 30 C 2 kg Max. 44 42
Easycare Cold 3 kg.Max. 96 64
0
Easycare Mild - 40 C ” 99 64
0
Easycare 60 C ” 114 64
0
Delicate 30 C 2 kg. Max 39 53
0
Mixed - 40 C 3 kg. Max 105 64
0
Wool 30 C 2 kg. Max 39 49
Rinse + Spin - 35 34
Drain - 2 -
Spin - 15 -
* -
**Programme setting for test in accordance or in confimity with EN 60456 and IEC 60456(with soak option)
57
Depending on the water pressure, water hardness, water inlet temperature, quantity and type of textile, detergent used, degree of soilage, ambient condition,
selected additional function &power supply fluctuations the actual values given on or with the machine can deviate from the declared standard values, as they
are tested according to the laboratory conditions. water consumption excludes the quantity of water taken during cool down cycle.
Water consumption excludes the quantity of water taken during cool down cycle of cotton 95 program.
15

Only machine washable fabrics should be washed in the machine ( look for
wash symbols given on your garments ).
16

DETERGENT TO BE USED AND QUANTITY
•The best washing results will be achieved by using the correct dosage of detergent .
•Use the detergent as per the instructions on the detergent packaging, However the dosage need to be adjusted during
usage to avoid effects of inadequate/excess detergent as mentioned below.
•The quantity of detergent to be used will depend on
a. Quantity of clothes being washed
b. Degree of soilage of clothes
c. Water hardness
•Hard water and heavily soiled clothes require more, while less soiled clothes requires less then recommended
quantity of detergents.
• Do not use dry cleaning agents.
• Frequent use of insufficient detergent will be noticeable as follows:
a. Washing appears grey or not properly clean
b. Grey/brown stains appear on the clothes
•Only use Detergent recommended for front loading washing machines.
• Excess use of detergent or not recommended detergent will result in
a. Higher environmental pollution
b. Generation of too much foam which may result in:-
• Building up of scales
• Poor rinse quality
• Less drying efficiency
• Reduction in life of the Components.
• More vibrations.
FABRIC CONDITIONER
• Fabric softener, Whitening, Enzyme, Disinfectants, Bleaching, etc.
• Fill in the middle chamber of detergent dispenser tray marked not exceeding the level marked “Max”
• Conditioner should be in liquid/solution form only (powders to be mixed in water)
• Fabric softener gives a soft feel and smooth surface to fabrics.
• Whitener gives ‘Whiteness’ to white clothes and brightness to coloured clothes.
• Enzymes help to remove stains of sweat, blood etc.
• Chlorine bleach is used for white clothes and oxygen bleach is used for coloured clothes.
• A strong bleaching agent is not recommended for direct use in the washing machine.
• Extremely dirty areas in clothes can be pretreated with bleach and then to be loaded in the machine for a
regular wash.
TREATMENT OF STAINS
•Stains need to be treated immediately while they are fresh. Usually stains are categorized as absorbed stains, builtup
stains, and compound stains.
•Absorbed stains can be removed by rubbing gently a pad containing a suitable solvent over the stain from outer edge
towards centre by keeping stained cloth on absorbent fabric.
•Built up and compound stains may be removed by first carefully brushing off stained area. Then rub gently with pad
containing solvent from the back of fabric.
•It is advisable to try out the solvent on hidden part of the garment to verify its effect on clothes.
FABRIC CARE SYMBOLS
0
WASHING SYMBOLS WASH TEMP MAX C ACTION
95, 60, 40 Normal
30 Gentle
Do not machine -wash Handwash
Do not wash in water
17

IRONING
18

CHECK POINTS:Before switching your machine ‘ON’check if …..
The power supply plug is connected to a 230 V, 50 Hz supply with good earthing.
The water inlet stopcock is fully open.
The inlet and exhaust hoses are straight and free from twist.
The coin trap is closed firmly and exhaust pipe is connected to drain.
PROGRAMMING THE MACHINE:
1. Switch ON the mains supply.
2. Rotate the programmer knob to the desired program.
3. Select the options preferred for the chosen program from the flashing options. After selection, the Led of
the chosen options will glow.
The chosen options can be deselected by pressing the button again.
Non-flashing options indicate that they are not applicable for the corresponding program.
4. Open the door and load the clothes inside the drum.
5. Put the detergent in the respective chamber.
6. Press the “Start/Pause” button to start the washing cycle. Flashing of optional button Led will turn OFF.
Door led will flash green &will glow red once the door is locked. status Led’s will glow depending on the phase of
the program.
7. If required enable the ‘Child lock’feature to prevent any tampering of program.
8. To change the options, Pause the machine èSelect / Deselect the options èPress Start button. The machine will
acknowledge the changes done automatically.
9. To change / cancel the program during the machine run, Press Pause button èSwitch OFF the machine èSwitch
ON èSelect a new program
10. Washing, Soaking, Rinsing & Spinning can be seen through the porthole door.
MACHINE STATUS INDICATION:
Door led will glow/Flash indicating the status of the door
During error mode the error codes will be indicated
WHEN THE PROGRAM HAS ENDED:
At the end of the program “End” LED will glow.
Door LED will at the end of the program.
Start/Pause LED will at the end of the Program
Open the door by pulling the door handle to remove the clothes from the machine
Switch OFF the machine by rotating the program selector knob to “OFF” position.
Leave door slightly ajar between washes to dry out the inside of the machine, to preserve the door seal.
l
l
l
l
l
l
l
lGlow Green
lswitch off
lonly after the door LED
glows green.
l
l.
19

Drain hose
Drain plug
Container
2
3
Open the detachable bottom door by
pressing the top portion of it.
DO NOT OPEN THE COIN TRAP DURING
A PROGRAMME RUN.
20
4

Drain Hose
Drain Plug
Container
Never leave metal items e.g. paper clips, safety pins etc. in the drum as it
creates superficial rust marks on drum. If there are any rust stains remove with
a non-chlorine agent. Special non-metal sponges (never use steel wool ) may
also be used.
21

WHY DOES IT HAPPEN ?
WASHING MACHINE DOOR DOES NOT OPEN
•
•Check if the door Green led is . check if the child lock is active
•For reasons of safety, the washing machine door cannot be opened when the water level, temperature or the speed is too
high
MACHINE DOES NOT START
•Check if the machine is powered ON.
•Check if the “Start/Pause” button is ON .
•Check water supply.
•Porthole door not closed properly.
WATER DOES NOT ENTER MACHINE/DETERGENT NOT BEING FLUSHED INTO DRUM
•Check water supply
•Porthole door not firmly closed
•Water tap not turned on
•Bent inlet hose
•Sieve on inlet valve/ inlet hose clogged.
SUDS ESCAPING FROM DETERGENT DISPENSER TRAY
•Detergent used is not a washing machine detergent
•Excessive detergent used
WATER LEAKAGE FROM THE MACHINE
•Inlet/Outlet hose connection loose
• Coin trap not screwed on properly
• Inlet hose leaking
MACHINE DOES NOT DRAIN
• Coin trap clogged
• Outlet hose end above 1 meter. from floor level
MACHINE DOES NOT SPIN/ CLOTHES REMAIN WET.
• Rinse Hold option is selected
• Coin trap is clogged.
• Unblanced load ( Divide the load in two halfs and spin each load using exclusive spin program with desired spin
speed or add smaller articles of laundry to balance the load & repeat the spin cycle.)
• Excessive detergent / Foam
• Load is too small.
MACHINE VIBRATES MORE DURING SPINNING
• Machine not leveled properly
• Coin trap clogged partially.
• Clothes not loaded as instructed/ unblanced load.
MOTOR NOISE
• It is normal for noises to be heard while motor is running. However wash load, belt tension and motor mounting bolt should be
checked for specified limits.
PUMP NOISE
• It is normal for noises to be heard from the pump during the start-up and final stage of draining. However check for fluff
filter clogging.
PROGRAM CYCLE TIME DELAYED
• Not a fault
• It is normal as the washing time may vary depending upon the type and quantity of laundry, inlet water pressure, inlet
water temperature, variations in power supply and other usage conditions.
• If there is unblanced load the machine may make several attemps to redistribute the clothes inorder to minimize the
vibrations resulting in extended program duration.
Check if the program is active.
glowing
/ EXCESSIVE FOAM IN THE
DRUM.
22