iFort S2508 Series User manual

IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not place product referred in this manual long-term in the extreme environment
6. Install in accordance with the manufacturer’s instructions.
7. Use accessories only specified by the manufacturer.
8. Refer all servicing to the qualified service personnel.Servicing is required when the product has been
damaged in any way.
INTRODUCTION
Congratulations on your selection of Energy saving switch product.
It offers a energy saving solution for the rooms of hotel, apartment and any other place it suitable.
When guest is in room, insert card in and the power comes.But when he is not in room power is not
supplied.Another function is keep the keycard for guest to find it easy.
Before using the instrument,be sure to carefully read through the instructions contained in this manual.
Please keep all information for future reference.
SPECIFICATIONS
Working voltage AC 180V~250V(110V required customize)
Live line in
INSTALL:
1. Uninstall front frame and card container
2. Wire and check as following drawing
3. Fill it in the junction box placed in the wall in advance.
4. Screw down to the junction box
5. Recover front frame and card container
WARNING
Turn the power supply to the instrument OFF before wiring or
checking.Working or touching the terminal with the power switched
ON may result in an Electric Shock which could cause severe injury
or death.
NOTICE:
1. User prepare junction box(standard 86x86cm)
2. Unit don’t include wires and screws of junction box
3. Live line out terminal is connected with the room load
Live line out
LED light
Zero line
Card container
Insert keycard here
Screw hole to
junction box
Front frame
fix clip
Card container
fix clip
Reder
fix clip
Working current <100 mA
Electric current MAX 30A
Working Tempreature 32 F~158 F(0 C~70 C)
Working Humidity 15~85%RH
Color white
Delay 15sec
Size 86×86×48mm(29mm bury in wall)
S2508/2308 series
Energy saving switch user’s manual
-model S2508/2308 series
AC 180V-250V
30A

Function form of S2508/S2308/S2208 series
INITIALIZE:
1. Read Authorized card to switch
(IC card switch requires insert card)
2. Read Time card to switch
(IC card switch requires insert card)
3. Read Room setting card to switch
(IC card switch requires insert card)
green light flash for succeed
red light flash for failed
green light flash for succeed
red light flash for failed
green light flash for succeed
red light flash for failed
S2508series
S2508series
work by insert...
S2308series
S2308series S2208series
S2208series
1. read Authorized card
2. read Time card
3. read Setting card
name card/credit card/
paper
in-correct guest card
correct room guest
card but already
expired
proper guest card
Safe class
REQUIRED
ISO 14443A/
IC(SLE4442)
ISO 14443A/
IC(SLE4442)
ISO 14443A&B&15693
/IC(SLE4442)
REQUIRED NO
Yes if same card type
IC/M1
Yes if same card type
IC/M1
Yes if same card type
IC/M1
NO NO NO
A B C
NO NO
NO YES
YES YES
Initialize
REQUIRED
NO
NO
NO
NO
REQUIRED
REQUIRED
REQUIRED
REQUIRED
Time card and Setting card comes from
support card type