iGear DL MBL01 User manual
Model No.: DL MBL01
Slender
Blender
Portable Mini Blender
Instruction manual
Personal Blender with 1 x 500ml capacity Bottles
Contect
Description of Parts
Specification
Circuit Diagram
Important Safeguards
Instructions for Use
Cleaning, Care and Maintenance
Troubleshooting
Description of parts
Top lid
Bottle
Seal ring
Blending
Blade
Blending base
Motor unit
On/Off switch
Grinding cup
Grinding base
Grinding blade
1
Model Number DL-MBL01 Rated Voltage 220-240V~
Rated Power 300W Rated Frequency 50/60Hz
Bottle Capacity 500ml Grinding Jug capacity 40g
Rated Blending time ≤60s Rated Grinding time ≤50s
Intermittent time ≥60s
2
Specifications
Circuit diagram
Push-key switch
Interlock switch
AC 220-240V
50/60 Hz
N L
C
B
R1 R2
D1 D2
LED 1 LED2
A
Series motor
Thermal link
1. This appliance is intended for domestic use only.
2. Read all instruction before using the appliance for the first time and keep it well for
future reference.
3. Do not switch on when the bottle is empty or over-loaded.
4. Check that voltage indicated on the rating plate corresponds with that of the local
network before connecting the appliance to the mains power supply.
5. Keep the appliance and its power cord away from Sharp edges or moving parts that
could cause damage.
6. Do not use other accessories that not supplied with this appliance.
7. Do not operate the blender with damaged power cord or plug, after the appliance
malfunction, or if it is dropped or damaged in any manner. Return the appliance to
the nearest authorized dealer or after-sales service centre for examination, repair,
electrical or mechanical adjustment.
8. Make sure that bottle is well rotated to blending base and correctly fixed on motor
unit. Do not leave blending base along on motor unit that could cause injury.
9. Ensure bottle is fitted completely with blending base, in avoid of leakage or blending
base fall off.
10. The ingredients do not exceed the maximum fill mark.
11. If it could not work please contact with our after-sales service centre per Email, do
12. If blades stuck, switch off and unplug blender and clean up the blocks. After motor
base cool down then use it again.
13. This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or interaction concerning use of the appliance by a
person responsible for their safety.
14. Disconnect the blender to main power supply when cleaning and assembly.
15. Be careful of sharp blade when cleaning and operation.
16. After use, clean the blender timely and keep it dry.
17. When using the blender for the first time, a slight odour may be emitted. This is
normal and will soon subside.
18. Do not immerse accessories into hot water that over 60
0
C and use microwave for
disinfection, in avoid of temperature distortion.
3
Important safety information
4
Carefully unpack the blender and accessories remove all packaging materials. Wash the
bottle, lid, blending base, seal ring with detergent and wash it again with clean water
and dry it. Wipe the motor base with a damp cloth.
• As the graphics show
• The size of blending food should be 1.5* 1.5* 1.5cm
• The selection of blending time:
a. Liquid food: 30s
b. Hard food: 60s
c. Continuously blending time do not over 1 minute
• Grinding time: between 15~50s, do not grind very hard food
• Special attention:
a. If the blade can not cut or touch to the food when grinding, please switch off and
disassemble the grinding cup, then shake the cup before put it onto the motor
house.
b. The blender must stop completely before you disassemble the grinding cup.
Interactions for use
3. Make this symbol “▼”of blending base rightly
about this symbol “ ” of motor unit and
press down bottle, rotate in a clockwise
direction to symbol“ ”.
Plug in and press on knob switch, the
appliance gets to work. Release the switch
then blender stop working.
Notes: The appliance is fitted with safety
protection. Ensure install correctly, otherwise it
won't work when switch on.
1. Place the blender onto stable and flat surface, keep away from
impacting from other things and reach of children.
2. Roughly cut food into small pieces
1.5* 1.5* 1.5cm. Put all ingredients
into bottle and pour proper liquid.
(The recommended ratio of liquid
to food is 3:2) Rotate bottle tightly
to lending base.
4. After blending Ingredients to desired this effect, release the switch, unplug the
unit from the outlet. Press down bottle, rotate in anticlockwise direction to
symbol “ ” and take up bottle. Invert bottle blending base upwards,
anticlockwise rotate blending base to pour juice into container. To go out, please
cover bottle with lid.
5. Put the dry food into the grinding jug and
install it on the grinding base as photo.
Locked the grinding jug with base on the
motor unit and then insert the plug. Switch
on the power, the grinder will running and
switch off the power will stop work. It just
need grinding 15s to 50s, do not put very
hard food into grinder.
5
After use, unplug the appliance from the mains outlet and wait for the blade to come to
a complete halt before removing the bottle from the base.
Wash all of the parts, except the power base unit in warm, soapy water, then rinse and
dry thoroughly.
Wipe the base unit with a soft, damp cloth and allow dry thoroughly. Particular care
must be taken when cleaning the blade because it is very sharp.
The blender should be cleaned after each use and keep it dry for next use.
Warning:
Never immerse the best unit in water or any other liquid.
Clean, storage and maintenance
6
Do not use stainless steel scrubber, abrasive detergent or corrosive liquids
( such as alcohol, gasoline or acetone) to clean the appliance.
Troubleshooting
Symptom
The blender will not
operate.
In the first few times of
use, there is a slight
odour emitted.
The appliance stops
working during use.
The blender has
vibration excessively or
big noise during use.
The blade is stuck.
The bottle is leaking.
Possible Cause
The bottle is not rotated
well to the motor base.
This is normal and will
soon subside.
1. A reduction in electric
power.
2. Motor over-heating
protection affects.
1. Bottle is not rotated
well with blending
base.
2. The blender base unit
is imbalance or rubber
foot peel off.
3. Overhigh Voltage
4. There are too many
ingredients in the
bottle.
The ingredients used are
too thick and heavy.
1. Bottle is not rotated
well with blending
base.
2. The bottle is broken.
3. Seal ring is not fixed or
damaged.
Solution
Rotate bottle correctly to the
motor base.
After use it for a period time,
the smell still exist, please
send it to after-service centre
for repair.
1. Check if main power supply
is too low.
2. Stop it for 20-30m then use
again.
1. Rotate bottle correctly with
blending base.
2. Place the appliance onto a
flat, stable surface.
Rubber foot are fixed in the
right place.
3. Check if voltage too high.
4. Switch off and unplug
appliance, reduce
ingredients, ensure that
do not exceed the
maximum fill mark.
Disconnect to the main power
supply, remove the bottle and
cut food into smaller pieces.
1. Rotate bottle correctly with
blending base.
2. Change a new bottle.
3. Fix or replace new seal ring.
Table of contents
Other iGear Blender manuals
