iGear SmartFit iG-C6T User manual

SmartFit
Health Activity Tracker
Model No.:
iG-C6T

* Please charge the device once per 3 months if put it idle no using.
Compatiable system and requirement:
Preparation:
IOS 8.0 or aboveAndroid 4.4 or above
Menu/Long-press power on
Please ensure the watch is fully charged for the first time usage. If you can’ t
switch it on due to low battery, please charge it for 2-2.5 hours. When you
charging the watch,there is a“charging sign”on the screen.
Pull out the device from the strap, Using build-in USB charger to connect with
power source for charging. Charge time is 2hours.
How to charge:

How it charge:
How to wear:
Sensor
Left Hand
Download the App:
IOS for
App Store
Android for
Google Play
Method1: Scan the code to download the APP.
Method 2:
Step 1: Search for Dayband from Google Play or
App store. Once downloaded, please enter the
app to connect the watch through Bluetooth.
Step 2: To connect search for the name,’iGear
Smartfit'.
1. Wear the watch on the left hand,
2. Close the backside sensor to the skin,
3. Adjust the fitable size to wear, and
press the clip button,insert the metal
pin into the hole.

Body Temperature:
Precaution:
1. Before testing the temperature, please wear the band for 30 Minutes.
Please wear it on your wrist and ensure the metal clip is close to the skin.
2.If tested people with big temperature difference from wrist and real
temperature due to health problem. We suggest to put the product on the
upper arm inside.
3. The default measurement time is 15 seconds, which is based on the
stable value. If the measurement result is above 37.5°C, the product will
vibrate, please use professional medical equipment to verify.
4, Long-press to enter into the test page, test time is 15 seconds, Long-press
to log out.
1. Please keep the Metal clip at the bottom, dry and clean and there must
be no stains or water, otherwise it will affect the test.
2. Please wear the product for 30 minutes before testing the body
temperature (first time use). The result will have difference if the wrist
temperature is different from the real body temperature due to
environment or health reason.
3. This product is not a medical product, and the tested data cannot be
used as a medical reference.
4. Please make sure the device is with full power because low battery will
not support body temperature testing.

Connection:
Turn on APP
Click setting icon
↓
My device
(iOS)
/ Search device
(Android)
↓
Pull down the screen,search device
↓
Click the device name
When using the bracelet for the first time, the bracelet should be
connected to the app. After connecting, the bracelet will automatically
synchronize the time and date. Step info will be synced too.
Bluetooth connection: After connected, the APP automatically saves the
MAC address of the device, when the APP is starting or running in the
background, the device is automatically searched and connected.
Data synchronization: Manually pull down the sync data in the app
homepage; the bracelet can store 7 days of offline data. The more the data,
the longer the synchronization time, the longest is about 2 minutes, and
there will be " synchronization completion" after the synchronization is
completed.

Heart rate monitoring: The product could measure heart rate hourly or you can set
it manually. In App there is setting for heart rate, if turn on hourly button, the
product will measure heart beat every hour. The data will be synced to App
automatically if its connected with phone.
Multi-Sport mode: There are several sport mode, like run, bike, badminton etc,
Under each mode, it records the calories burnt and activity time.
Distance display: Shows the total distance (km/mi) of movement
Calories Mode: Displays total calories (kcal) burned.
Call reminder: Turn on “Call reminder” in App, it will vibrate when you get a call.
Message reminder: Turn on “Message” in APP, it will gently vibrate when you get a
new message (SMS, Facebook, Twitter, etc.)
Sleep monitoring: Automatically monitor your whole sleep quality and analyze the
deep sleep and light sleep hours.
OTA upgrade: It will continue to optimize and update for the functions.
Turn on / off: Long-press the mode button to switch it on, long press the Power off
option on the screen to switch it off.
Blood pressure: Stay on this page, it will measure blood pressure automatically.
the blood pressure data can be synced to App if its connected.
Blood oxygen: Stay at this page, it will measure blood oxygen automatically.
Body Temperature: Long press to enter into the temperature measurement mode,
measure time is 15 seconds, longpress to log out.
Reject call: Longpress the menu button to reject the call once the product i s
connected with phone.
The function specifications:

1. Can't Find iGear Smartfit and Can't connect with it?
①Please ensure the bluetooth is ON and the system of mobile phone is Android 4.4 or
above and iOS 8.4 or above.
② If it still unable to connect, enter the phone settings →
Application Management → Authorization Management → Application Rights
Management → Find application [ DayBand] → Allow all permissions as "allowed" → Enter
the phone settings and select GPS location and turn on GPS function →Restart the
phone → Try to connect.
③Please ensure bracelet is fully charged. Do feel free to contact us if it does not work
when full charged.
2. The APP shows no connection after bound with bracelet, or it is connected but
the power is 0%?
In this case, the App is not bound with bracelet sucessfully, please try again.
3. Can’t connect the device with APP?
Pull down and refresh main interface, it will manually synchronize the data, then it can
display data in the APP. Auto-sync data will only be synchronized at first binding. Then
it will automatic synchronize the data hourly. In addition, don t forget to open hourly
measurement, other wise histogram will have not data.
4. Pull-down and refresh APP,the data is not loaded?
App settings → Restore the factory settings → Click restore factory settings → Turn off the
bracelet → Restart bracelet → Connect with APP. Then data can be loaded out.
5. Time for bracelet is not accurate?
When the bracelet run out of power, the time of it may be in error after being
recharged. Please connect with the mobile and the bracelet will automatically
synchronize the time.
6. The bracelet time is not synchronized after connecting with the phone?
Mobile phone settings → Application management/rights management → Open
permissions of APP → Reconnect the bracelet → Pull down and refresh it at main
interface of the APP.
Question & Answers:

Specifications
Screen size 0.96” TFT
Operation One-touch button
Waterproof IP 67
Material TPU
Strap size 250mm*19mm*12mm
Smart band standby 7days
Charging time 2-2.5 hours
Charge Method
Package
USB
Watch & Manual
Remark
1. If there are questions about the way of use, Please contact us for quick help.
2. The measurement results of this product are for reference only, not for any medical
purpose and basis. Please follow the doctor's instructions and do not rely on the
measurement results for self diagnosis and treatment.
3. The waterproof grade is IP 67, which can be used for used for day to day use. But the
band can not be used for diving and put under water for long time. In addition, do not
put the product in hot water, because will affect the band.
4. Our company reserve the right to modify the manual or interface without notification.
Some functions are different on different software version which is normal.
5. Some functions like message pushing or caller ID display may not be compatible with
some type of smart phones, which is normal.

Name of Commodity: SmartFit
Month & Year of Import: January 2021
Net Quantity: 1 unit
Net Weight: 50 gms
Voltage: DC 5V
Dimensions: 240mmX20mmX12.5mm
Country of Origin: PRC
Warranty Period: 1 Year
Imported and Marketed By:
IGear Tech Pvt. Ltd.
204, Sai Corporate Park,
Laxmi Nagar, Off Link Road,
Goregaon West, Mumbai - 400104.
In case of consumer complaints:
Toll free number - 1800 22 8495
Email: [email protected]
(Between 10am to 5pm, Mon- Fri)