Marea Smart B57004 User manual

Outdoor Fitness Tracker B57004
User Manual
Thank you for choosing our product. Please read this manual
for a thorough understanding of the use and operation of the
equipment.
The company reserves the rights to make changes to the
contents of this manual without prior notice.
Product includes: package x1, manual x1, Smart band x1

1. Description of bracelet
1.1 Touch key
Press and hold for 3 seconds to turn it on.
Press to go from one function to another. Press and hold to access that function.
1.2 Charging instructions:
Please pay attention to the charging direction.
*Please be aware that the two contacts of charging cannot contact the conductor
at the same time, or it may cause the burning of circuit.

1.3 Strap disassembly and assembly instructions:
2. Standby dial plate interface
2.1 Home screen
2.2 Step count
The step count is enabled by default. This interface displays the current
number of steps, kilometers, calories and heart rate. The data are cleared
every day at 12 am.
2.3 Health
2.3.1 Heart rate (Bpm): correctly place the bracelet on your wrist (left or right
arm), enter the heart rate function and let the bracelet take the heart rate value.
If the bracelet is linked to the application, the heart rate data is synchronized
with the application in real time.
2.3.2 Blood pressure (mmHg): correctly place the bracelet on your wrist (left
or right arm), enter the blood pressure function and let the bracelet take the
blood pressure value. If the bracelet is linked to the application, blood pressure
data is synchronized with the application in real time.
2.3.3 Sleep: The sleep monitoring period is from 9:00 p.m. to 9:00 a.m. the
next day. After the bracelet saves the data and the sleep monitoring is finished,
the data is synchronized with the application if the bracelet is linked to the
application.

2.4 ECG
Be sure to wear the bracelet during the electrocardiogram test. Enter the
function, press and hold the touch button with your finger to start the
measurement. The test ends at 30 seconds. If you stop pressing within 30
seconds, you will be prompted to start the measurement again.
2.5 Breathing guide
Enter the breathing function. After 2 minutes the breathing guide begins. After
breathing adjustment, follow the light point to adjust your breathing (inhale with
"inhale" and exhale with "exhale").
2.6 Notifications
When notification permission is enabled, the messages that appear in the
notification bar of the mobile phone will be sent to the bracelet. A total of 5
messages can be saved, and the message received after 5 will overwrite
previously received messages.
2.7 Sports mode
Select the desired sport mode (walking, running, climbing, cycling, indoor
running, basketball, soccer) and press and hold the touch button to start; press
and hold the touch button to stop the measurement and see the menu; choose
to return to the measurement, choose to finish and
save the data or choose to exit without saving the data.
2.8 External data
The mobile phone is connected to the network. After the application has
acquired the external data information, the data is sent to the bracelet.
2.8.1 Altitude
2.8.2 Atmospheric pressure
2.8.4 UV
2.8.4 Time

2.9 Configuration
2.9.1 Vibration
Press and hold the touch button to turn the vibration on / off. Enabling vibration
will affect battery life.
2.9.2 Brightness adjustment
Press and hold the touch button to adjust between three levels: low, medium
and high.
2.9.3 Restore factory settings
Press and hold the touch button to restore factory settings. All data on the
bracelet will be deleted.
2.9.4 Off
Press and hold the touch button to turn off the bracelet.
2.9.5 Version information
See the name, Bluetooth address and version number of the bracelet.
3. App
3.1 Download app and link bracelet
1. Go to our website www.mareasmart.com and find your smart watch model.
The model number is found on the back of the smart watch (it starts with “B”
and is followed by five digits)
2. Download and install on your phone the official app that corresponds with
your smart watch model
3. Open the app and enable all the permissions that the app requests
4. Turn on Bluetooth on your phone
5. Make sure that the smart watch has not been linked directly through
Bluetooth to your phone. If so, unlink it.
6. Bind your Marea Smart watch through the app
3.2 Data synchronization
When the bracelet is linked to the application, the health data of the bracelet is
synchronized with the application. Select the date you wish to view to see the
data corresponding to that date.
3.3 Notifications
When the bracelet is linked to the application, it is necessary to enable the
notification permission on the mobile phone. You also need to enable
notifications in the application. When the mobile phone receives calls, SMS
messages or notifications from other applications, the bracelet will receive one
/ multiple notifications.
3.3.1 Incoming call notification

In the application, it is necessary to activate the “incoming call” option to
receive notifications of incoming calls on the wristband.
3.4 Sedentary Reminder
Set the start time, end time and sedentary time interval (in minutes). When
sedentary time is over, the bracelet vibrates, showing a sedentary icon.
3.5 Alarm Reminder
Click on "smart alarm clock" to add the alarm time. When the selected time
arrives, the bracelet will display the alarm icon.
3.6 Heart Rate Detection
3.7 Firmware update
Detects if the firmware version of the bracelet is the latest version. By clicking
on this function, you will be informed if there is a new version and will be
updated to the latest version.
3.8 Unlink
Click on unlink the bracelet to unlink the bracelet. In the iOS system, it will be
necessary to go to the Bluetooth settings on the phone and select "ignore" on
the linked bracelet.

FAQ
Do not expose this device to overcooling or overheating conditions for a long
time. Otherwise, it will cause permanent damage.
• Why can't I wear the bracelet when I take a hot bath?
As the temperature of the bath water is high, it will generate water vapor, which
is characterized by a small molecule radius. In that state, it is easy to penetrate
through the space of the bracelet housing. When the temperature drops, it will
become water in a liquid state, which can cause a short circuit in the bracelet,
damaging the circuit board.
• Why does the bracelet not turn on or charge?
If you just purchased the bracelet and it does not turn on, it may be because
the battery is protected by a collision during transport. Plug the charging cable
to activate the bracelet.
If the bracelet cannot be turned on because the battery is too low or has not
been used for a long time, connect the USB cable and charge it for half an
hour before activating the bracelet.