Ikan SL100 User manual

Qu i c k St a r t Gu i d e / SL100
In t r o d u c t I o n
Thank you for purchasing the ikan SL100 Fluorescent Softbox. We know that you will be satised with its versatility and ease
of use. Please visit www.ikancorp.com for more information on our current and future products including our award winning
uorescent studio lights and LCD monitors.
Pa c k a g e c h e c k l I s t
Removable Diffusion Face
Support Ring
Support Rods
Heat Resistant Soft Box
Fluorescent Bulb
Light Fixture
Power Cord
ge t t I n g s t a r t e d
1. Carefully remove light from packaging.
2. *If bulb was already installed proceed to remove it and carefully set it aside.
3. Remove soft box contents from black bag.
4. Take the soft box and lay it down on a at surface with the reective side facing up.
5. Please view reverse side for full assembly instructions.
3903 Stoney Brook Dr. Houston Tx, 77063. 1-713-272-8822,[e-mail] © 2007 ikan corporation. All rights reserved. www.ikancorp.com
l I g h t f I x t u r e
r e P l a c I n g t h e f u s e :
1. Using a at-head screw driver remove the fuse cap located at
rear of xture underneath the power switch.
2. Remove the fuse from the cap carefully.
3. Once the fuse is removed, replace it with a new 250v fuse.
4. Insert the fuse cap back into the xture
n o t e :
There is a spare fuse hidden inside the fuse cap. If the
fuse blows, simply replace the blown fuse with the
supplied spare fuse.
A Power Switch
BFuse Cap (Use only with 250v fuse)
C Power Input (Voltage: 110v / 220v)
D Controls the angle of the light xture
E Light stand’s peg receptacle





□
□
□
□
□
□
□
Checked by
co n d I t I o n s o f Wa r r a n t y se r v I c e
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period has expired.
Free Service will not be Provided in the Following Situations:
* Even if the product is still within the warranty period.
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors etc.