Ikan ELE-A7S-C User manual

What’s Included
QUICKSTART GUIDE
ELE-A7S-C
Sony a7S Cage Kit
[email protected] © 2015 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY
1 x A7S Cage
1 x Top Handle
1 x Top Handle Screw
2 x 15mm Rods (12-Inch length)
1 x ¼-20 Thread D-Ring Screw

Rig Assembly
A single thumbscrew located on the
side of the baseplate controls the rod
clamp for each rod. Open the rod
clamp by rotating the thumbscrew
counterclockwise.
Slide each 15 mm rod through the
baseplate. Lock the rods into the
desired position by rotating the
thumbscrew clockwise.
The top handle mounts directly
to the top of the cage. Use the
black screw to securely lock
the top handle into place.
1.
2. 3.

Camera Mounting
Camera Removal
To remove your camera, turn the thumbwheel clockwise until it becomes free.
For safety, support your camera at all times during the removal process.
1. With the lens removed, slide your camera through the back of the cage.
2. Line up the camera’s ¼”-20 threaded hole to the ¼”-20 thread screw.
3. Looking down at the cage, turn the thumbwheel counterclockwise to mount your
camera until it is securely in place.

Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: [email protected]
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2015 ikan Coporation. All rights reserved