Ikan PT1200-TK User manual

What’s Included
QUICKSTART GUIDE
1 x Glass Frame / Monitor Assembly
1 x Magnetic Hood
2 x 12-Inch Rods
1 x Baseplate Assembly
1 x PrompterPro Software
PT1200
12" Portable Teleprompter Kit
[email protected] © 2015 ikan Corporation. All rights Reserved
www.ikancorp.com 713.272.8822
CHECKED BY

What’s Included
Glass Frame / Monitor Assembly
2 x 12-Inch Rods
Baseplate Assembly
PrompterPro Software
Custom cut foam for hard case
Magnetic Sunhood
PT1200

How to Assemble
1. Insert rods into rail mount on glass monitor assembly.
2. Slide baseplate onto rods.
3. Adjust spacing for your camera.
NOTE: Glass can be removed
by unscrewing the three (3)
screws around glass frame.
4. Tighten & Loosen thumb screw to adjust glass frame. Ideal angle is 45 Degrees.
1. 2.
3.
4.
PT1200
ON
OFF
MEN
VIDE
VG
HD

PT1200
ON
OFF
MEN
VIDE
VG
HD
5. Attach magnetic hood to glass frame.
6. Make sure adjustable thumb screws are tight.
7. Remove quick release plate and attach to your camera. Reattach to Baseplate.
8. Don’t throw away the foam insert!
The PT1200 comes packaged in high-quality, custom-cut foam. It is sized perfectly to fit
inside an SKB iSeries 1914-8 water-proof case.
6.
6.
7.
5.

Monitor Ports
BNC – AV Composite Input
VGA – Video Graphics Array DE15 Connection
HDMI – High-Definition Multimedia Interface Input Connection
Power Port – 12-24v Input
HDMI – Switch HDMI input
VGA – Switch to VGA input
AV – Switch to composite BNC input
Flip – Toggle image flip
(Can be set to horizontal, vertical, or both via menu)
Up Arrow – Toggle up to adjust setting
Menu – Access to monitor settings
Down Arrow – Toggle down to adjust setting
Monitor Menu Settings
Video Config
Contrast (White Level)
Brightness (Black Level)
Tint (Chroma Hue)
Chroma (Chroma Saturation)
Sharpness (Detail)
RGB Setup – Manually configure RGB
Return
System Config
Menu Duration – Set duration of how long menu stays
on screen
Video Ratio – Set screen aspect ratio 16:9 or 4:3 (4:3 is
native resolution, 16:9 will create black bars)
Flip-H – Assign toggle button to flip image horizontally
Flip-V – Assign toggle button to flip image vertically
Reset – Factory reset
Return
PC Setup (Only available for VGA)
H-Position – Adjust horizontal position
V-Position – Adjust vertical position
Auto – Monitor automatically adjust position
Return
Exit
HDMI
How to set-up FLIP button feature:
1. Press MENU button
2. Navigate to SYSTEM CONFIG.
3. Navigate to FLIP-V or FLIP-H
4. Change FLIP-V and/or FLIP-H to “ON”
5. Exit MENU
6. The FLIP button should now be activated and can be
pressed to mirror the image Horizontally or Vertically
7. When FLIP-H is ON, the image will flip Horizontally
8. When FLIP-V is ON, the image will flip Vertically
9. If both are ON, the FLIP button will toggle both
Horizontal and Vertical flip

Learn More
More dynamic information at official website: www.ikancorp.com
Support
Contact email: [email protected]
CONDITIONS OF WARRANTY SERVICE
• Free service for one year from the day of purchase if the problem is caused by manufacturing errors.
• The components and maintenance service fee will be charged if the warranty period is expired.
Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.)
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company.
• Damage caused by natural disaster, abnormal voltage, and environmental factors, etc.
©2015 ikan Coporation. All rights reserved