Ikegami XHG-3329 Operating instructions

Model : XHG-3329-W/B
How to use
recess mount housing
Components
ⲻThank you for purchasing our product.
Before attempting to connect or operate this product,
please read these instructions carefully and save this
manual for future use.
How to use Adaptor
C
A
AA
A
B
BB
C C
D
D
EE
ɐ
120ٛ
ɐ
120ٛ
ɐ
120ٛ
ٛ
ɐ
73.0
68.5
ٛ
ɐ
140.0
ⷄ3FDFTT.PVOU ⷄ5FNQMBUF ⷄ"EBQUFS
ⷄ%FDPSJOH
ⷄ4QBDFSNN ⷄ4DSFX.
ⷄ5FNQMBUFGPSDVUUJOHUIFDFJMJOHⷄ8JSFSPQF
ⷄ5VSOCVDLMF ⷄ&ZFCPMU ⷄ8JSFKPJOU
ⷄ4DSFX.
ⷄ4DSFX.Y
QDGPSTQBSF
Anchor bolt tightening position
position de serrage de boulon d'ancrage
posicion de ajuste de tornillo de anclaje
ᦺ⋕ᅝ✙ᖅ⊹᭥⊹
168
Center / Centre / Centro
To be symmetrically placed
from the center
A placer symetriquenent par
rapport au centre
instalar simetricamente a la
perforcion del techo
225᮹ᵲᝍ᭥⊹
󱂞ᰆaŖᬊ⩶❱
Model : XHG-3329-W/B
How to use recess mount housing

INSTALLATION
ΙFix the adapter to the recess mount with M3 screws
through the spacers. Then, fix the camera to the adapter
with M4 screws as picture shows.
ΚFix the dome cover to the base.
ΛPut the template into the hole of ceiling.
ΜConnect eyebolt to the recess mount housing. Fix the wire
rope to inside ceiling.
ΝPlease adjust length of wire rope using Tumbuckle.
Ξ
As picture shows, insert recess mount housing into the ceiling.
Fix it to the template using M3x70 screws.
ΟFit the part of decoration ring into each right hole of housing
and press the ring lightly.
ΗPut the template on the right part of ceiling for installation
and make a hole
ΘPlease draw outside service wire from the hole of ceiling.
Ceiling
Template for cutting the ceiling
Outside service wire
NN
Turnbuckle
Recess mount
Dome cover
Screw M3x70
Template
OPEN CLOSE
Ceiling
ⲻ5IFBDUVBMQSPEVDUNBZEJGGFSGSPNUIFQJDUVSFCVUUIFSFJTOPQSPCMFNJOVTJOH