
ICD-F24 1/2" 3-CCD Color Camera
Optical system
RGB prism system, F1.4
Imaging device
FIT CCD,
effective pixels: about 380,000
(total pixels: about 400,000)
Image format
1/2 inch
Lens Mount
1/2-inch bayonet mount
TV system
NTSC
Horizontal resolution
750TVL
S/N ratio
62dB(AGC off)
Minimum illumination
2 Lux(Gain: 18dB)
Video output level
Composite,
Y,C,
RGB,
SYNC
Local setup
5 buttons of back side of camera
Remote control
RCU-701,
MRU-240,
RS-232C
Lens control
Iris,
Zoom,
Focus
Power supply
DC 12V
(within the range of DC 11V-16V)
Dimension
100(W) x 125(H) x 175(D) mm
(without connector)
SpecificationFeatures
l
In the 3-CCD configuration, the three primary colors of light that are
separated by an RGB prism are introduced to their respective CCDs.
Compared with conventional single-CCD CCTV cameras, the design
helps substantially improve the resolution, color reproduction and
other performances.
l
The three CCDs are precisely mounted in position (by the spatial pixel
shifting technique). The horizontal resolution comes in as high as
750 lines, which has not been achieved with single-CCD cameras.
l
Unlike IT CCDs used in single-CCD cameras, the FIT type CCDs of this
model greatly reduce moire, smear and other noises that are peculiar to
CCDs. What's more, high-quality picture is attained at the signal-to-noise
ratio of 60dB.
l
The gain change-over circuit incorporated in this apparatus enables
video gain control of -3, 0, +3, +6, +9, +15, and +18dB.
l
The AUTO/MANUAL selection filter and one-touch auto white circuit
(AWC) incorporated in this apparatus enable a good color reproduction
under various types of light sources.
l
The correction circuit incorporated in this apparatus for eliminating white
shooting generated through lens gives always the most appropriate video
balance even if the lens is exchanged.
l
The video output include VBS composite, Y/C, RGB, and sync signals,
which provides for better picture for many different applications.
l
Use of interface cable enables remote-control of various functions from
a personal computer etc. through RS-232C.
l
The camera can produce EIA-compatible color bars. In this way the
characteristics of the transmission system can be checked and adjusted, and
the monitor can also be precisely adjusted for colors, brightness and other
factors.
l
Each camera can be identified with a code of up to 16 characters in a line.
Names of surveillance spots or camera numbers may be displayed on the
monitor to identify the camera.
Ikegami
R
IKEGAMI ELECTRONICS (U.S.A.), INC.
HEADQUARTERS
37 BROOK AVENUE, MAYWOOD, NJ 07607
Phone: (201) 368-9171Fax; (201) 569-1626
WEST COAST OFFICE
20603 EARL STREET, TORRANCE, CA 90503 Phone: (310) 370-2400 Fax: (310) 370-7131
SOUTHWEST OFFICE
TWO DALLAS COMMUNICATIONS COMPLEX, 6309 NORTH O'CONNOR ROAD, SUITE 117,
IRVING, TX 75039-3510 Phone: (972) 869-2363 Fax: (972) 556-1057
MIDWEST OFFICE
747 CHURCH ROAD, UNIT C4 ELMHURST, IL 60126 Phone: (630) 834-9774 Fax: (630) 834-8689
SOUTHEAST OFFICE
5200 N.W. 33RD AVENUE, SUITE 111, FORT LAUDERDALE, FL 33309 Phone: (954) 735-2203 Fax: (954) 735-2227
Design and specifications are subject to change without notice.
n
URL http://www.ikegami.com
Appearance
View