Ikelite 5509.15 User manual

Zoom Sleeve for Canon 24-105mm f/4 II Lens
Product Number 5509.15
Diagram A
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Port Mount
Zoom Sleeve
Retainer
Zoom Sleeve for Canon 24-105mm f/4 II Lens
Product Number 5509.15
Diagram A
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Port Mount
Zoom Sleeve
Retainer
Zoom Sleeve for Canon 24-105mm f/4 II Lens
Product Number 5509.15
Diagram A
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Port Mount
Zoom Sleeve
Retainer
Zoom Sleeve for Canon 24-105mm f/4 II Lens
Product Number 5509.15
Diagram A
Zoom Sleeve
Retainer Tool
Zoom Sleeve
Port Mount
Zoom Sleeve
Retainer

Zoom Sleeve Installation
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.15_Zoom_Sleeve_1-0117
©2017 Ikelite Underwater Systems
Diagram B Diagram C
Zoom Sleeve Installation
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.15_Zoom_Sleeve_1-0117
©2017 Ikelite Underwater Systems
Diagram B Diagram C
Zoom Sleeve Installation
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.15_Zoom_Sleeve_1-0117
©2017 Ikelite Underwater Systems
Diagram B Diagram C
Zoom Sleeve Installation
1. If necessary, remove black dust cap from housing port hole
before installing Zoom Sleeve. Rotate the Zoom Sleeve
Retainer Tool counterclockwise to remove Retainer.
2. Install components as shown, Diagram A.
3. Tighten Zoom Sleeve Retainer into Port Mount using Zoom
Gear Retainer Tool - Diagram B. Tighten clockwise so
Retainer is snug. DO NOT overtighten.
4. Install lens and test zoom function - Diagram C.
ikelite.com
5509.15_Zoom_Sleeve_1-0117
©2017 Ikelite Underwater Systems
Diagram B Diagram C