imageHOLDERS Slimline Series User manual

Slimline Wall Mounted Tablet Enclosure
Range Instructions
[phone] | 1-888-858-9778 | [e-mail]
Unit B8, Arena Business Centre, Nimrod Way, Wimborne, Dorset. BH21 7UH.
© imageHOLDERS Ltd. All rights reserved
016_08_000 / 016_10_000 / 016_12_000
A- Rear Enclosure
B- Tablet Tray Assembly
C- Bezel and Cassette Assembly
D- Enclosure Key
Note: B & C may vary based on your chosen Tablet
E- Screwdriver (Or Power Drill - Surface Dependent)
F- Wood/Masonry Screw x 7 (6mm max. Diameter)
G- Spirit Level
H- Pencil
AB
C
D
A
B
C
D
Additional Tools Required
Items Supplied
H
G
F
E
D
C
B
A
Slimline Glass Mount Instructional Video:
https://youtu.be/49ZwM0YzJyU

Slimline Wall Mounted Tablet Enclosure
Range Instructions
[phone] | 1-888-858-9778 | [e-mail]
Unit B8, Arena Business Centre, Nimrod Way, Wimborne, Dorset. BH21 7UH.
© imageHOLDERS Ltd. All rights reserved
016_08_000 / 016_10_000 / 016_12_000
Unlock both locks on either side of A
using the keys provided (D).
Push up Cto release from A.
[Tip: Keep one hand on the enclosure and one
on Cassette]
With Creleased lift clear of A.
If using a cavity wall for power supply, skip to
Step 4.
Insert your Tablet’s Power Cable through the small cut out
in the back of Aand channel into the small cable cut out.
Scan the QR code or visit the link for the Slimline Glass
Mounting Instructional Video.
5*
[Note: Blue Cable showing cable routing for cavity wall installations]
Position Rear Enclosure (A) on surface in desired position.
Ensure the unit is level using a spirit level (G).
[Tip: loosely screw in through top centre screw hole, as highlighted, to
hold unit in position]
Screw in remaining screws (F) using E.
[Note: We recommend using at least 4 of the 7 screw holes as shown]
Depending on your chosen surface it may be easier to;
- Mark the centre of the holes with a pencil (H).
- Drill pilot holes and install raw plugs if required.
33
2
1
https://youtu.be/49ZwM0YzJyU

Slimline Wall Mounted Tablet Enclosure
Range Instructions
[phone] | 1-888-858-9778 | [e-mail]
Unit B8, Arena Business Centre, Nimrod Way, Wimborne, Dorset. BH21 7UH.
© imageHOLDERS Ltd. All rights reserved
016_08_000 / 016_10_000 / 016_12_000
Lift the Tablet Tray (B) out of the
Cassette (C)
Turn on your Tablet and place it in
the Tablet Tray (B)
Slide the Tablet Tray (B) back into the
Cassette (C)
With the tablet fitted, plug in your tablet’s power cable.
[Location may vary from the options shown above]
Position the Tablet Cassette (C) into the Rear Enclosure (A)
just above centre to locate and push down to fully close.
Lock the Enclosure by pushing in the Push Lock Pins. Tip: Use cable conduit for added security and aesthetics.
Your Slimline Tablet Enclosure is ready for use.
87
6
5
4