Imalac Nurture User manual
Quick Start Guide
More Milk.
Less Time.
Innovation Inspired
by Mothers
The Imalac Dierence
At Imalac, we’re committed to empowering
moms by providing life-changing solutions
they want and need. By understanding
the universal frustrations of nursing and
pumping, we strive to give women the
right tools and resources to achieve their
breastfeeding goals.
The Nurture Bra
Comfort & Function
Designed by top lingerie experts, our
wear-all-day Nurture Bra is flattering,
comfortable, and supportive.
Full Support
The lift, shape, and
support you need.
Perfect Fit
Adjustable straps,
soft materials, and
broad sizing.
Timeless Style
A beautiful, classic
silhouette with
seamless design
Get to Know Your Nurture System
1
2
4
5
3
6
. Nurture Bra
. Left/Right Massage Cups
. Nurture Control Box
. Left/Right Modules
. Carrier Bag
. Laundry Bag
. Power Cord
(not pictured)
Using Nurture by Imalac
Unclip outer layer AND pumping layer
on bra and fold down.
Insert massage cups, labeled left
and right, into opening of each wire
channel. Tuck cups behind pumping
layer to rest against chest. Attach
cups to bra with side clip located in
underarm area of bra.
Insert breast shields from your pump
through slot in pumping layer of the
bra and opening in massage cups.
Press and hold the release buttons on
the modules to remove the safety caps
and then attach to the corresponding
massage cups.
(Massage cups and
modules are labeled “Le” and “Right”)
Continue setting up your pump and
begin pumping at this time. If needed,
adjust your breast shield to ensure
comfort.
Attach cups to bra with lowest hook on
bra strap. Clip pumping layer to top
hook on bra strap. Adjust breast so that
it fully rests in the cup. Then mold the
upper wire to the shape of your breast.
1
2
4
5
63
For more detailed information, refer to the “Instructions for Use”
or see our “How To Use” video on Imalac.com
Power on control box by pressing and
holding ON/OFF button for 2 seconds.
The indicator lights will turn yellow.
Start a session by pressing STOP/RUN.
The lights will turn green.
Adjust settings for Pressure, Speed and
Hold before or during session. Settings
range from 1 (lowest) to 5 (highest).
Press SET/SYNC to rotate between
settings and each breast. Press + or -
to adjust level of each setting.
Stop a session by pressing STOP/RUN.
The indicator lights will turn red.
DO NOT DISCONNECT MODULES YET.
When indicator lights return to yellow,
it is safe to disconnect modules by
pressing and holding the release
buttons. Replace the safety caps on
the modules and power off the control
box by pressing and holding ON/OFF.
TIP: Adjust settings for one breast,
then press and hold SET/SYNC to
apply the same settings to other breast
automatically.
Your session is complete. Time to take
back your day!
12
11
10
8
7
9Cuomize your seings
Imalac.com
