IMC Toys Toy Story 3 140028 User manual

140028-Special DS_USA
© Disney/Pixar
ITEM 140028_Special DS_USA • EAN: 8421134140028 • 050510
4
2 x 6LR61 9V
Battery requirements:

ENGLISH
For any claim about its correct functioning, please contact with:
IMC TOYS, S.A. • Pare Llaurador, 172 • 08224 Terrassa (Barcelona) España • [email protected] • www.imc.es • NIF: A-08667370
WRIST WALKIE TALKIE
USE AND OPERATING INSTRUCTIONS
IMC TOYS products undergo strict pro-
duction controls to guarantee the en-
joyment and safety of your children.
They are easy to use and operate. We
are certain that they will provide your
children with great entertainment.
Thank you for purchasing one of our
products.
To consult our extensive product cata-
logue, please visit our web page at
www.imc.es.
Using a Phillips screwdriver, open the
battery compartment of the intercom-
municators, located inside the unit, and
insert 1 x 6LR61/9V battery (preferably
alkaline), noting the polarity for each
unit as appears in the diagram, then
screw the cover back on.
Adjust the intercommunicator to fit
your arm by pressing the open button
and placing it just above the wrist. En-
sure that the lock is completely closed
by listening for the click. The intercom-
municators are equipped with a special
foam to make them adaptable to va-
rious diameters of forearm. Repeat this
operation for the other unit.
To start the intercommunicators, lift up
the protective cover and turn the volu-
me dial, you will hear a click and the LED
operation indicator will light up. Set the
volume to the desired level and repeat
this operation for the other unit.
Press the PUSH TO TALK button to talk
and release it to receive a reply. Direct
your voice towards the Toy Story shield,
as this is where the speaker and micro-
phone are located. The best reception
is achieved in open spaces without
obstacles. Reception may be very poor
in some places due to the proximity of
electric pylons, high voltage towers or
radio or electromagnetic antennae.
Reception can be drastically reduced in
these areas.
To activate the LED laser simulator, press
the button located to the right of the
volume control and the LED at the front
will light up.
CARE AND SAFETY
To clean the unit, use a slightly moist
cloth. Do not use detergents or solvents.
In case the device gets wet, turn it off
and remove the batteries immediately.
Dry the battery compartment with a dry
cloth. Leave the battery compartment
uncovered all night so that it may dry
completely. Do not attempt to use the
device until it is completely dry.
WARNING
The construction teams use radio sets.
Avoid activating your walkie talkie whe-
rever it might cause interference.
WARNING! Do not use close to the ear!
Misuse may cause damage to hearing.
REMARKS ON ENVIRONMENTAL
PROTECTION
At the end of the life span of this pro-
duct, it could not be disposed as the nor-
mal household rubbish. It must however
be submitted to a collection spot for the
recycling of electrical and electronic
devices. The symbol on the product, of
the user manual or of the packing refers
to the above-mentioned.
The materials are, according to their
marking, recyclable. You make an im-
portant contribution to the protection
of our environment with the recycling,
the material utilization or other forms of
utilization of the old devices.
Please make enquiries with the respon-
sible disposal center at the local autho-
rity.
WARNING:
- Not suitable for children under 3 years
of age. It contains small parts which
might be ingested by them. Choking
hazard.
- Please keep the packaging for future
reference as it contains very important
information.
- Please note that due to technical im-
provements this product may differ
from the one that appears in the illus-
tration.
- This product requires 2 type 6LR61/9V
alkaline batteries (not included).
- The batteries or accumulators must be
inserted according to the polarity indi-
cated in the illustration.
- Used batteries or accumulators must
be removed from the toy; failure to do
so could cause damage.
- Do not mix old batteries with new
ones.
- Do not mix different types of batte-
ries.
- Use only those batteries recommen-
ded by the manufacturer or equiva-
lents.
- Non-rechargeable batteries must not
be recharged.
- The battery terminals must not be
bridged or shorted.
- Changing or handling the batteries
must always be carried out under the
supervision of an adult.
- Remove the batteries from the com-
partment if the unit is not going to be
used for a long period of time.
- Please respect the environment and
deposit used batteries in the containers
provided.
- Rechargeable batteries are to be re-
moved from the toy before being char-
ged.
- Rechargeable batteries are only to be
charged under adult supervision.
- This product achieves better perfor-
mance using alkaline batteries.
- Read the instructions before use, fo-
llow them and keep them for reference.
- The unit may malfunction when there
is a radio interference appeared on the
power line. The unit will revert to normal
operation when the interference stops.
- Under the environment with electros-
tatic discharge, the sample may mal-
function and require user to reset the
sample.
- Under the environment with Fast Tran-
sient, the sample may malfunction and
require user to reset
the sample.
- Remove all elements designed to
fasten and protect the product during
transport before giving it to children
(plastic pieces, labels, wires, etc.).
INSTRUCTIONS FOR USE
“IMC.TOYS, S.A., as manufacturer, declares
under its responsibility that this device
observes the rules of 1999/5/EC Directive,
of the European Parliament and of the
Council dated 9th March 1999, integrated
into Spanish Legislation by Real Decreto
1890/2000 of 20th November”.

This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
**This device and its antenna must not be co-located or operating in conjunction with any other
antenna or transmitter.