impact LSP-SW10S User manual

LSP-SW10S
9.5 ft. Steel Roller with Brake Wheels

•9.5 Ft. Steel roller
•Locking wheel assembly
•Hex bolts (×3)
•Hex nuts (×3)
•Cable clip
•M8 hex key
1. Fit the locking wheel
assembly over the end of the
leg, so that the wheel faces
inward, and the holes are
aligned.
2. Insert the hex bolt completely
through the circular recess of
the wheel assembly until it
comes out of the other side.
Screw the hex nut onto the
opposite end of the bolt.
3. Tighten the hex bolt with the
included M8 hex key until
secure.
Contents
Attaching the wheels to the stand
1
2
3

Specifications
Construction Chrome-plated steel column and legs, aluminum alloy risers
Maximum Load 27 lb. (12.25 kg)
Minimum Height 4 ft. (1.2 m)
Maximum Height 9.5 ft. (2.9 m)
Closed Length 3.9 ft. (1.2 m)
Footprint Diameter 3.3 ft. (1 m)
Riser 2 risers, 3 sections
Diameter Column: 1.4 in. (35 mm)
Riser: 1.2 in. (30 mm)
1 in. (25 mm)
Leg Design 0.79 in. (20 mm) square
Attachment Size 5/8 in. (16 mm) baby stud
Air Cushioned No
Weight 13 lb. (5.9 kg)
Specications

Two-Year Limited Warranty
This Impact product is warranted to the original purchaser to be free from defects
in materials and workmanship under normal consumer use for a period of two
(2) years from the original purchase date or thirty (30) days after replacement,
whichever occurs later. The warranty provider’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at the
provider’s discretion, of any product that fails during normal use of this product in
its intended manner and in its intended environment. Inoperability of the product
or part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model
of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect,
accident, alteration, abuse, improper installation or maintenance. EXCEPT AS
PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS
WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and
you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Impact Customer Service Department
to obtain a return merchandise authorization (“RMA”) number, and return the
defective product to Impact along with the RMA number and proof of purchase.
Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.impactstudiolighting.com
or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Impact is a registered trademark of the Gradus Group.
© 2018 Gradus Group LLC. All Rights Reserved.
GG2