Inalsa Fusion User manual

PTC
FAN HEATER
Instruction Manual

1
Dear Customer,
Congratulations! On the purchase of your INALSA PTC Fan Heater, this is
designed to include many superior features that permit you the fullest
expression of your living skill and enthusiasm. You are now on the threshold
of a whole new world of living pleasure.
At INALSA, we have a reputation of manufacturing innovative, high quality
appliances such as Food Processors, Mixer Grinders, Juicer Mixer Grinders,
Cooking Ranges, Juice Extractors, Cooktops, Microwave Ovens, Oven
Toaster Grillers, Hand Blenders, Electric Kettles, Rice Cookers, and Electric
Chimneys. Your newly acquired INALSA PTC Fan Heater bears the same
distinctive hallmark of excellence.
It is all the result of vigorous quality consciousness in INALSA's design and
development where uncompromising standards are maintained and rigid
quality control measures are exercised on raw materials, components and
finally, the finished product.
Your INALSA PTC Fan Heater has a lot of thoughtful features built in to
make your living convenient. Please read these instructions carefully, so that
you may get the best out of the power packed features in your INALSA PTC
Fan Heater.
Welcome to the INALSA world of living pleasure!

Part No. Parts Name
1. Carry Handle
2. Thermostat Control Knob
3. Auto Swing Switch
4. Heat Selector Knob
5. Power Indicator Lamp
6. Safety Grill
7. Ceramic Heating Element
8. Main Body
9. Base
10. Tip Over Switch
Technical Specification *
Product PTC Fan Heater
Model Fusion
Wattage 1500 W
Voltage 230V, 50Hz, AC
Cord plug PVC cord with 3 pin, 16A, 250V plug
* Due to continuous improvements in product, specifications are subject to change
without prior notice.
Identification of parts
3
4
5
6
8
9
2
1
7
10
2

Do
1. Read all instructions before using the fan heater.
2. Only connect the fan heater to a single-phase socket with a main voltage
as specified on the rating plate.
3. Do not leave your home while the appliance is in function: ensure that the
switch is in OFF(“O”) position and the thermostat is in minimum
position. Always unplug the appliance.
4. Keep combustible material such as furniture, cushions, bedding, paper,
clothes, curtains etc. at least 100cm away from the fan heater.
5. Always unplug the heater when not in use. Do not pull the cord to unplug
the heater.
6. Keep the air inlet and outlet free from objects: at least 100cm in front and
50cm from top & behind.
Do not
1. Do not let animals or children touch or play with the fan heater. Pay
attention! The air outlet gets hot during operation it may cause burns.
3. Do not cover. If covered, there is the risk of overheating.
4. Do not use this fan heater in the immediate surroundings of a bath, a
shower or a swimming pool.
5. Do not use the fan heater in the rooms with explosive gas or while using
inflammable solvents, varnish or glue.
6. If the cord of this appliance is damaged discontinue use of this product
and contact the nearest authorised service centre.
7. Keep the fan heater clean. Do not allow any objects to enter any
ventilation or exhaust opening as this may cause electric shock, or fire or
damage to the heater.
8. Not to be use for commercial purpose.
9. Do not immerse in water or any liquid.
Operation
1. Turn the thermostat knob (2) in clockwise direction until it reaches the
maximum setting.
3

2. During summer turn the knob (4) to fan position for only FAN mode.
3. Heating at reduced power: turn the knob(4)to setting 'I' (750W).
4. Heating at full power :turn the knob (4) to setting 'II' (1500W)
5. Switching off: turn the knob (4) to setting 'OFF'
6. Oscillation: For auto oscillation function, press the swing knob (3)
down. The product can be used with and without oscillation.
Regulating the thermostat
When the room has reached the required temperature turn the thermostat
knob (2) in anti-clockwise direction up to the point where the appliance
switches off and not beyond. The temperature fixed in this way will be
automatically regulated and kept at a constant level by the thermostat.
Cleaning and Maintenance
1. Before cleaning, always remove the plug from the electrical socket.
2. Clean the air inlet/outlet grilles frequently.
3. Never use abrasive powders or solvents for cleaning.
Warnings
1. Do not use the appliance for commercial purpose.
2. Always use the heater in an upright position.
3. Do not use the heater to dry your laundry. Never obstruct the intake and
outlet grills(danger of overheating).
4. The heater must be positioned at least 50cm from furniture or other
objects.
5. Do not use the appliance in rooms less than 4m² area.
6. The heater is fitted with a safety device which will switch off the heater
in case of accidental overheating (eg. obstruction of air intake and outlet
grills, motor turning slowly or not at all).To reset, disconnect the plug
from the power for a few minutes, remove the cause of overheating then
plug the appliance in again.
7. The heater is fitted with a safety device switch which will switch off the
heater in case the heater is not placed properly at its base. In case this
happens, place the heater properly at its base.
4