MILL Oil Premium Series User guide

EN
SLO
This product is only suitable for well insulated spaces or occasional
use.
Ta izdelek je primeren samo za dobro izolirane prostore
ali občasno uporabo.
IT Questo prodotto è adatto solo per spazi benisolatio uso occasionale
Please read the instructions carefully before use.
Take good care of thismanualfor later use.
Assembly and instruction manual
Series:
Oil Premium

Thanks for buying Mill
Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution
sell to many of the largest retailers in the Nordic countries.
In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry
with fresh new eyes and wondered why there had been so little change with the
appearance of portable heaters in the last 20 years, especially since interior design in
general had changed dramatically over the years. Philip thought consumers should
have more styles to choose from other than the typical old-fashioned, traditional
heaters.
Since heaters are part of so many homes, Philip and Cato decided to use their
extensive knowledge to re-invent the design of heaters. They wanted to create
beautiful, modern and minimalistic heaters, using the most advanced technology, that
would complement people’s homes. They launched the brand “Mill” in 2012.
to complement our line of products to meet consumers’ demand.
Prospering on our success in the Nordics we decided to promote Mill at some of the
world’s largest electronic fairs and home shows in 2015 and 2016 - the feedback from
retailers and distributors all over the world were amazing. We are proud to say that
consumers in over 25 countries can now keep warm with style!
Follow us on social media:
@millheat
millheat.com
[email protected]
@

1
millheat.com
EN
Content
P. 2-3
P. 4
P. 4
P. 4
P. 4
P. 5
P. 5
P. 5
P. 6
P. 6
P. 7
P. 7
P. 7
P. 8
P. 8
P. 9
P. 9
P. 9
P. 9
P. 9
P. 10
P. 10
P. 10
P. 10
P. 11
P. 11
P. 11
Important safety information
First use
Description of heater
Parts
Assembly
Instructions mechanical thermostat
Usage mechanical thermostat
Instructions day/night thermostat
Usage day/night thermostat
Timer function
Day- and nighttime setback
How to activate daytime setback
How to activate nighttime setback
Change setback temperature – daytime
Change setback temperature – nighttime
Change number of hours – daytime
Change number of hours – nighttime
Cancel (skip) setback period
Delete setback program
Temperature calibration
Resetting the heater
Memory function
Maintenance
Warranty
Waste disposal
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Please read the instructions carefully before use.
Take good care of this manual for later use.
IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.
STORE THIS INSTRUCTION
MANUAL FOR FUTURE USE!
NEVER TOUCH YOUR HEATER OR ITS
CASING WITH WET HANDS!

2
EN
You must obey common safety guidelines when using electrical
products, especially in the presence of children.
WARNING! To avoid electric shock or damage due to the
heat, always make sure the plug is pulled out before the
heater is moved or cleaned.
READ THE INSTRUCTIONS CAREFULLY
•The product is intended for home use only.
• Make sure the heater is connected to the house's regular mains
as indicated on the heater.
•
• Check forany pieces of packing foam or cardboard that may
have fallen into theheating elements of theheater. These pieces
must be removed to avoid unpleasant odors.
• Prevent the heater from overheating – do not cover.
• long period of time.
• Pay special attention if the heater is used in rooms where
children, the handicapped or elderly reside.
• Theheater should not be set up directly beneath an electrical
socket outlet.
• The cord must not be laid under any kind of carpet. Make surethe
cord is laid in such a way that nobody can trip on it.
• The heater must not be used if either the cord or plug is
damaged. The heater must not be used if it has been dropped
malfunction.
• The cord must be repaired by the manufacturer or by an expert if it
has been damaged, to avoid dangerous situations.
• Avoid using extension cords, which may overheat and could
• hazards by making sure the air intakes are not blocked or
Important safety information

3
millheat.com
EN
• The heater should not be installed in close proximity to
• The heater must never be used in rooms where gasoline, paint or
• Never touch an electric heater with wet hands. The heater
should be installed so a person showering or taking a bath
cannot come into direct contact with it.
•Some parts of this product can become very hot and cause
burns. Particular attention has to be given where children and
vulnerable people are present.
• heater must cool down before it is moved.
• Avoid overloading the mains (the circuit) where the heater is
connected. The heater may overload the electrical circuit if
other electrical devices are plugged into the same socket outlet.
• Do not use this heater in small rooms when they are occupied
by persons not capable to leaving the room on their own, unless
constant supervision is provided.
• The product cannot be used by children under 8 years of age
and persons with reduced physical or mental abilities or lack
of experience and knowledge unless they have been given
supervision or instruction in the safe use of the product and
understand the hazards involved.
• Children should not play with the product. Cleaning and
maintenance should not be done by unsupervised children.
• Children under the age of 3 should be kept away from the
product, unless they are under constant supervision.
• Children aged 3 to 8 years are only permitted to turn the
product ON/OFF, assuming the heater is mounted according
to the assembly instructions and the children have received
instruction or supervision in the safe use of the product and
understand the hazards involved.
• Do not use this heater in the immediate surroundings of a bath,
a shower or a swimming pool.
WARNING! The heater must not be used if the glass panels are
damaged (applies to AB-H1000DN GLASS only).

4
EN
First use
Description of heater
during transport. Contact the retailer or importer if you discover any visible damages to
the product.
Keep the outer packaging to transport the heater in the future. If you want to dispose
the packaging, make sure it is done properly. Keep plastic bags away from children.
d period without use,
the heater can produce a burnt odor for a short time. This is normal.
Please read all the instructions carefully before use. Save the instruction manual for future
use.
It is also normal for the heater to make “sounds” when it warms up or cools down.
Please see table above for which models that have mechanical/day- and night
thermostats
Day/night thermostat
and Mechanical thermostat
Model Thermostat Color Amperage
Power
(W)
Mill Heat
Boost
AB-H1000MEC Mechanical White 220-240V~, 50-60Hz 1000 Yes
AB-H1000DN Day/night White 220-240V~, 50-60Hz 1000 Yes
AB-H1500DN Day/night White 220-240V~, 50-60Hz 1500 Yes
AB-H2000DN Day/night White 220-240V~, 50-60Hz 2000 Yes
AB-H1000DN GLASS Day/night Glass 220-240V~, 50-60Hz 1000 Yes
AB-H1000DN BLACK Day/night Black 220-240V~, 50-60Hz 1000 Yes
A B C
1. Heat emission
2. LED display
3. Control panel
4. Output selector and thermostat
5. ON/OFF
6. Legs (aluminium)
1. Heat emission
2. Indicator light
3. Thermostat
4. Output selector
5. Legs (aluminium)

5
millheat.com
EN
Parts
Assembly
Instructions mechanical thermostat
1. 2 rails for the feet
2. 2 foot brackets
3. 8 screws (pre-mounted)
1. Remove the pre-mounted screws on both legs before you insert them into the
brackets, so that you get a stable foot.
2. Attach the legs to the brackets by tightening 2 screws into each bracket.
3. Remove the pre-mounted screws from the bottom of the heater and place the
heater gently on its head to mount the feet.
4. Two screws must be fastened on each foot bracket.
5. NEVER USE THE HEATER BEFORE THE LEGS HAVE BEEN TIGHTLY SCREWED.
Please see table on page 4 for which models that have mechanical thermostats
Control panel
1. Indicator light
2. Thermostat: Adjust the desired heat setting
3. Output selector:
0: OFF
I: Low
II: Medium
III: High
WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!

6
EN
Usage mechanical thermostat
1. Set the output selector to the OFF position (0) and the thermostat to minimum.
Plug the heater into a grounded outlet.
2. Set the output selector to position |, || or |||. Turn the thermostat up to the maximum
position. When the desired room temperature has been reached, turn the
thermostat slowly down until you hear a click. The thermostat can now remain in
s soon as the room
temperature falls below this level, the heater will automatically switch on again.
When the room has again reached the desired temperature, the heater will switch
3. If you wish to change the room temperature, repeat the instructions in step 2.
4.
extremely hot.
5.
Please see table on page 4 for which models that have day- and night thermostats
Control panel
1. Standby
2. Daytime setback
3. Nighttime setback
4. Power indicator — Shows whether the heater is using power or not
5. Desired room temperature
6,7,8 Indicates the output level
9. Timer function
10. Daytime setback activation button
11. Nighttime setback activation button
12. Function button
13. Timer activation button
14. Thermostat and output selector:
i.
to the right to increase the temperature.
ii. Push the button to change the desired power level. 3 power levels
WARNING! BE SURE THE FOOT IS FITTED CORRECTLY AND ACCORDING TO THE
INSTRUCTIONS BEFORE USING THE HEATER!
Instructions day/night thermostat
If the temperature sensor is not functioning properly, you will see this
symbol on the display. Please contact the dealer or importer.
Usage mechanical thermostat

Usage mechanical thermostat
7
millheat.com
EN
Usage day/night thermostat
1. Plug the heater into a grounded outlet.
2. Press OFF/ON button.
3. Choose the desired power |, || or |||, by pressing the output selector. Turn the
thermostat to the desired temperature while looking at the display. As soon as the
room temperature drops below this level, the heater will automatically start again.
When the room has reached the desired temperature again, the heater will turn
4. The thermostat goes from 5 to 35°C.
5. If you want to change the temperature in the room, repeat step 3.
6.
extremely hot.
7.
for a longer period of time, pull out the plug.
Timer function
r of hours have passed.
Day- and nighttime setback
When programming the heater for either day- or nighttime setback, the setback
period will be active from the time you register the program. Which means; if you want
to start your daytime setback at 7.30 am, you need to register the program at 7.30 am.
You only need to program the heater 1 time for daytime setback and 1 time for
nighttime setback. If you have programmed the heater, the setback programs will be
active on the following days:
Daytime setback: Monday-Friday (day 1-5)
Nightime setback: All nights
EXAMPLE:
Let us say you want to program the heater for both daytime- and nighttime setback
(normally the heater is set to 23 degrees). You want the heater to do the following:
1. Daytime setback activated from 7.30 am to 2.30 pm. Desired temperature: 17
degrees
2. Nighttime setback activated from 10.00 pm to6.00 am. Desired temperature:18
degrees

8
EN
1. Tuesday 7.30 am you go to the heater and press on the heater’s control panel.
2. “d” will be visible in the display. Use the wheel to set what day it is today when
you are programming the heater (1= Monday, 2 = Tuesday etc.) You are not
programming the heater for the various days. This is simply to tell the heater what
day it is when you are programming the heater, since the daytime setback is active
3.
4.
5. The daytime setback will now be active from 7.30 am to 2.30 pm Monday-Friday.
Setback temperature is 17 degrees.
How to activate daytime setback
*Control light is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
How to activate nighttime setback
1. At 10.00 pm you go to the heater and press on the heater’s control panel.
2.
3.
4. The nighttime setback will now be active from 10.00 pm to 6.00 am every day. The
setback temperature is 18 degrees.
*Control light is green when the heater is in an active setback period. The control
light is red when the setback period is inactive but programmed.
you will have to do this over again.
ATTENTION!
asked to registernumber of hours and temperature while programming. The standards
are as follows:
Daytime setback: 5 hours and 17 degrees
Nighttime setback: 7 hours and 17 degrees
Besides this they follow the same set up.

9
millheat.com
EN
Change setback temperature – daytime
Press and hold and press 3 times.
Enter the desired temperature for daytime setback. Save by pressing or wait for
Change number of hours – daytime
Press and hold and press 2 times.
Enter the desired number of hours for daytime setback. Save by pressing or wait
sheet
Change setback temperature – nighttime
Press and hold and press 3 times.
Enter the desired temperature for nighttime setback. Save by pressing or wait
Change number of hours – nighttime
Press and hold and press 2 times.
Enter the desired number of hours for nighttime setback. Save by pressing or
Cancel (skip) setback period
Press and hold and press or once (depending on which setback period
you want to cancel).
* The heater will skip an active setback period or the next setback period.
* During the next setback period, the heater will automatically resume the
programmed temperature reduction.

10
EN
Delete a setback program
Press and hold or (depending on which setback period you want to cancel)
for 3 seconds.
Temperature calibration
Resetting the heater
main switch.
It may occur deviation between the temperature registered by the heater and the
actual temperature in the room. This can be caused by several reasons, however, the
most common is that the heater is placed in a fair distance from where you usually
reside. When you set the temperature to for example 22 degrees, it is only natural that
you expect the same temperature where your sofa is placed for instance. However,
the temperature sensor is placed on the product itself, and therefore a deviation in
temperature may occur. To adjust this, all Mill heaters are equipped with a calibration
function, which enables you to adjust the temperature registered by the heater. N.B!
The room must have achieved a stable temperature before any calibration.
Press 2 times and use + or – to set the actual temperature observed in the room.
Memory function
The heater remembers all the temperature settings and will automatically return to
again.
Temperature calibration
Resetting the heater
Memory function

Temperature calibration
11
millheat.com
EN
Mill International B.V.
De Giesel 5
6081 PG Haelen
The Netherlands
Tel: [phone]
www.millheat.com
[email protected]
Maintenance
Warranty
Waste disposal
1. For cleaning, always unplug the heater and leave it to cool.
2. Wipe the heater regularly with a damp cloth and dry the surface before turning on
the heater again.
3. The heater must be cleaned at least once a month during the heating season.
CAUTION! The heater should never be immersed in water.
Avoid using detergents to clean the heater.
Never let any water get inside the heater; this can be hazardous.
4.
5. The heater can be stored in a dry and clean place.
6. If the heater stops working, do not attempt to repair it yourself because it can
The warranty is valid for 2 years. The heater will be repaired or replaced during
this time should any malfunction occur. The warranty applies if the heater is used
according to these instructions and the customer can present a purchase receipt. If
the heater malfunctions in any way, please contact the store where it was purchased
or the importer.
The symbol indicates that this product is not to be disposed of together with
household waste. This product must be delivered to a recycling service or container
for electrical appliances and electronic equipment. This is done to avoid health risks
and prevent harm to the environment. Local businesses (or the environmental station
in your neighborhood) are required by law to accept and recycle such products, as a
means of environmentally sound disposal.

NE POKRIVAJTEGRELNIKA, DA NE
PRIDE DO PREGREVANJA.
Pozorno preberite navodila za uporabo, preden
pričnete z uporabo proizvoda. Skrbno shranite ta
navodila za kasnejšo uporabo.
TA NAVODILA ZA UPORABO
SHRANITE ZA KASNEJŠE
PREVERJANJE!
NIKOLI SE NE DOTIKAJTE
GRELNIKA ALI OHIŠJA Z
MOKRIMI ROKAMI!
SLO
1
Vsebina
S. 2-3
S. 4
S. 4
S. 4
S. 4
S. 5
S. 5
S. 5
S. 6
S. 6
S. 7
S. 7
S. 7
S. 8
S. 8
S. 9
S. 9
S. 9
S. 9
S. 9
S. 10
S. 10
S. 10
S. 10
S. 11
S. 11
S. 11
Pomembni varnostni podatki
Specifikacije
Pred prvo uporabo
Prva uporaba
Opis grelnika
Deli
Montaža
Navodila za mehanski termostat
Uporaba mehanskega termostata
Navodila za dnevni/nočni termostat
Uporaba dnevnega/nočnega termostata
Funkcija časovnika
Dnevni in nočni zamik
Kako aktivirati dnevni zamik
Kako aktivirati nočni zamik
Spreminjanje temperature zamika – podnevi
Spreminjanje temperature zamika – ponoči
Spreminjanje števila ur – podnevi
Spreminjanje števila ur – ponoči
Prekini (preskoči) obdobje zamika
Brisanje nastavitev zamika
Umerjanje temperature
Ponastavitev grelnika
Spominska funkcija
Vzdrževanje
Garancija
Odlaganje odpadkov
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

• Ta proizvod je namenjen zgolj domači uporabi.
• Grelnik priključite na hišno omrežno napajanje, kot je
navedeno na grelniku.
• Novi grelniki ob prvi uporabi oddajajo določen vonj. To bo po
krajšem času izginilo in je povsem neškodljivo.
• Preverite, če so v grelne elemente grelnika padli koščki
embalažne pene ali lepenke. Te koščke je potrebno odstraniti, da
ne pride do neprijetnih vonjev.
• Preprečite pregrevanje grelnika –ne pokrivajte.
• Vedno izklopite grelnik in ga iztaknite iz vtičnice, če ga dalj časa
ne uporabljate.
• Bodite še posebej pozorni, če se grelnik uporablja v prostorih, kjer
se nahajajo otroci,invalidi ali starejši.
• Grelnik ne sme biti postavljen neposredno pod električno vtičnico.
• Kabla ni dovoljeno polagati pod preproge. Položen mora biti tako,
da se nihče ne more spotakniti obenj.
• Če sta kabel ali vtikač poškodovana, se grelnika ne sme
uporabljati.
• Grelnika se ne sme uporabljati, če je padel na tla ali je kakor koli
poškodovan in okvarjen.
• Poškodovani kabel mora popraviti proizvajalec ali strokovnjak, da
ne pride do nevarnih situacij.
• Ne uporabljajte podaljškov kabla, saj se lahko pregrejejo in vžgejo.
• Nikoli ne pokrivajte prezračevalnih odprtin na grelniku. Preprečite
požarno nevarnost, tako da preprečite blokiranje ali pokrivanje
prezračevalnih odprtin. Grelnik je potrebno uporabljati v prostorih z
običajnimi ravnimi tlemi.
Pri uporabi elektronskih aparatov je potrebno upoštevati
splošne varnostne smernice, še posebej v prisotnosti otrok.
OPOZORILO! Za preprečevanje električnega udara in
škode zaradi vročine, je potrebno vedno izključiti vtič pred
premikanjem ali čiščenjem grelnika.
SKRBNO PREBERITE NAVODILA
Pomembni varnostni podatki
millheat.com
SLO
2

• Grelnika ni dovoljeno namestiti v bližini vnetljivih materialov,
saj obstaja nevarnost požara.
• Grelnika ni dovoljeno uporabljati v prostorih, kjer se hranijo
bencin, laki, barvila ali druge vnetljive snovi, npr. v garaži.
• Nikoli se ne dotikajte električnega grelnika z mokrimi rokami.
Namestite ga tako, da se ga ne more dotakniti osebe med
tuširanjem ali v kadi.
• Nekateri deli izdelka se lakho zelo segrejejo in povzročijo
opekline. Posebno pozornostje potrebno posvetiti otrokom in
ranljivim osebam.
• Pred premikanjem je grelnik potrebno izključiti, iztakniti vtič,
grelnik pa se mora ohladiti.
• Ne preobramenite električnih povezav (el. omrežja) grelnika.
Grelnik lahko preobremeni el. tokokrog, če v isto vtičnico
priključite tudi drugi električne naprave.
• Ne uporabljajte grelnika v majhnih prostorih, kjer se nehajajo
osebe, ki prostora ne morajo zapustiti same, razen če so pod
stalnim nadzorom.
• Proizvoda ne smejo uporabljati otroci mlajši od 8 let in osebe
z omejenimi fizičnimi ali umskimi zmožnostmi ali neizkušene
oz. nepoučene osebe, razen če so pod nadzorom ali so bile
poučene o varni uporabi proizvoda ter razumejo s tem
povezane nevarnosti.
• Otroci se ne smejo igrati s proizvodom. Otroci brez nadzora
ne smejo čistiti ali vzdrževati proizvoda.
• Otroci mlajši od 3 let se ne smejo približevati proizvodu, razen
če so pod stalnim nadzorom.
• Otroci stari od 3 do 8 let lahko proizvod izključijo/vključijo
zgolj, če je grelnik nameščen v skladu z navodili za uporaboin
so bili otroci poučeni o varni uporabi oz. so med uporabo pod
nadzorom ter razumejo s tem povezane nevarnosti.
• Ne uporabljajte tega grelnika v neposredni bližini kadi, tušaali
plavalnega bazena.
SLO
3
OPOZORILO! Pecice ne smete uporabljati, ce je steklena plosca
poskodovana (velja samo za AB-H1000DN GLASS).

Glej sliko 1 na posebnem listu z diagramom
Pred prvo uporabo
Prva uporaba
Po razpakiranju grelnika preverite, če je bil izdelek poškodovan med prevozom. Stopite
v stik s preprodajalcem ali uvoznikom, če odkrijete vidne poškodbe na izdelku.
Zunanjo embalažo shranite za kasnejši prevoz grelnika. Embalažo je potrebno odlagati
na primeren način. Plastične vreče shranite stran od dosega otrok.
Ob prvi vključitvi ali vključitvi po daljšem obdobju mirovanja, lahko grelnik kratek čas
oddaja vonj po ožganem. To je normalno.
Pred uporabo pozorno preberite vsa navodila. Shranite navodila za uporabo za
kasnejše preverjanje.
Normalno je tudi, da grelnik med segrevanjem in ohlajanjem proizvaja določene »zvoke«.
millheat.com
SLO
4
Opis grelnika
Preverite zgornjo tabelo za modele, ki imajo mehanske/nočno-dnevne termostate
Dnevni/nočni termostat
in Mehanski termostat
Model Termostat Barva Jakost toka
Moč
(W) Mill Heat
Boost
AB-H1000MEC Mehanski Beta 220-240V~, 50-60Hz 1000 Ja
AB-H1000DN Dan/noč Beta 220-240V~, 50-60Hz 1000 Ja
AB-H1500DN Dan/noč Beta 220-240V~, 50-60Hz 1500 Ja
AB-H2000DN Dan/noč Beta 220-240V~, 50-60Hz 2000 Ja
AB-H1000DN GLASS Dan/noč Beta 220-240V~, 50-60Hz 1000 Ja
AB-H1000DN BLACK Dan/noč Črna 220-240V~, 50-60Hz 1000 Ja
A B C
Specifikacije
1. Oddajanje toplote
2. LED prikaz
3. Nadzorna plošča
4. Izhodni izbirnik in termostat
5. Vklop/izklop
6. Noge (aluminij)
1. Oddajanje toplote
2. Indikatorska lučka
3. Termostat
4. Izhodni izbirnik
5. Noge (aluminij)

Glej sliko 2 na posebnem listu z diagramom
Glej sliko 3 na posebnem listu z diagramom
Glej sliko 4 na posebnem listu z diagramom
1. 2 tirnici za nožice
2. 2 nosilca nožic
3. 8 vijakov (prednameščenih)
1. Odstranite prednameščene vijake z obeh nožic, preden le-te vstavite v nosilce,
da dobite stabilno oporo.
2. Pritrdite nožice v nosilce s privitjem 2 vijakov v vsakega od nosilcev.
3. Odstranite prednameščene vijake z grelnika in ga pazljivo položite na glavo, da
namestite nožice.
4. Na vsakega od nosilcev je potrebno namestiti po 2 vijaka.
5. NIKOLI NE UPORABLJAJTE GRELNIKA, DOKLER TRDNO NE PRIVIJETE NOG
1. Indikatorska lučka
2. Termostat: Izberite želeno nastavitev toplote
3. Izhodni izbirnik:
0: Izključeno
I: Nizko
II: Srednje
III: Visoko
SLO
5
Deli
Montaža
Navodila za mehanski termostat
Preverite tabelo na strani 4 za modele, ki imajo mehanske termostate.
Nadzorna plošča
OPOZORILO! NOŽICA MORA BITI PRED PRIČETKOM UPORABE
NAMEŠČENA USTREZNO IN V SKLADU Z NAVODILI ZA UPORABO!
Deler
Montering
Bruksanvisning mekanisk termostat

Bruksanvisning mekanisk termostat
Glej sliko 5 na posebnem listu z diagramom
1. Izhodni izbirnik premaknite v izklopljeni položaj (0), termostat pa na minimum.
Priključite grelnik v ozemljeno vtičnico.
2. Izhodni izbirnik premaknite v položaj |, || ali |||. Premaknite termostat na
maksimum. Ko je dosežena želena sobna temperatura, počasi premaknite
termostat navzdol, dokler ne zaslišite klika. Termostat sedaj lahko ostane v tem
položaju, dokler ni potrebna drugačna sobna temperatura. Takoj, ko sobna
temperatura pade pod to raven, se bo grelnik takoj samodejno ponovno vključil.
Ko je želena sobna temperatura ponovno dosežena, se bo grelnik ponovno
izključil.
3. Če želite spremeniti sobno temperaturo, ponovite postopek iz 2. koraka.
4. Grelnik ima zaščito pred pregrevanjem, ki napravo izključi, če se kateri od delov
zelo segreje.
5. Za izklop grelnika premaknite izhodni izbirnik v položaj 0. Če grelnika dalj časa ne
boste uporabljali, izvlecite vtikač.
millheat.com
SLO
6
Uporaba mehanskega termostata
Preverite tabelo na strani 4 za modele, ki imajo nočne/dnevne termostate.
Nadzorna plošča
1. Mirovanje
2. Dnevni zamik
3. Nočni zamik
4. Indikator napajanja – kaže, če grelnik uporablja napajanje ali ne.
5. Želena sobna temperatura
6,7,8 Kaže izhodno raven
9. Funkcija časovnika
10. Gumb za aktiviranje dnevnega zamika
11. Gumb za aktiviranje nočnega zamika
12. Funkcijski gumb
13. Gumb za aktiviranje časovnika
14. Termostat in izhodni izbirnik:
i. Premaknite izbirnik v levo, da zmanjšate temperaturo in v desno, da povečate
temperaturo.
ii. Pritisnite gumb za spremembo želene ravni moči. 3 ravni moči
OPOZORILO! NOŽICA MORA BITI PRED PRIČETKOM UPORABE
NAMEŠČENA USTREZNO IN V SKLADU Z NAVODILI ZA UPORABO!
Če temperaturni senzor ne deluje pravilno, se bo prikazal ta znak.
Stopite v stik s preprodajalcem ali uvoznikom.
Navodila za dnevni/nocni termostat

Glej sliko 6 na posebnem listu z diagramom
Glej sliko 7 na posebnem listu z diagramom
SLO
7
Uporaba dnevnega/nocnega termostata
1. Vtaknite vtič v ozemljeno vtičnico.
2. Pritisnite gumb za vklop/izklop.
3. Izhodni izbirnik premaknite v položaj |, || ali |||, za izbiranje želene moči. Zavrtite
termostat do želene temperature ter opazujte zaslonski prikaz. Takoj, ko sobna
temperatura pade pod to raven, se bo grelnik samodejno ponovno vključil. Ko
temperatura v prostoru ponovno doseže želeno vrednost, se bo grelnik sam izključil.
4. Termostat obsega vrednosti od 5 do 35°C.
5. Če želite spremeniti temperaturo v prostoru, ponovite korak 3.
6. Grelnik ima zaščito pred pregrevanjem, ki izključi napravo, če postanejo
posamezni deli zelo vroči.
7. Za izklop grelnika pritisnite gumb za vklop/izklop. Če se grelnik dlje časa ne
uporablja, izvlecite vtič.
Funkcija časovnika
Funkcija časovnika bo izključila grelnik po preteku določenega števila ur.
Dnevni in nocni zamik
Pri nastavitvi grelnika za dnevni ali nočni zamik, bo zamik aktiven od časa, ko
registrirate program. To pomeni: če želite začeti z dnevnim zamikom ob 7.30,
morate registrirati program ob 7.30.
Grelnik morate zgolj enkrat nastaviti za dnevni zamik in enkrat za nočni zamik. Če
ste grelnik nastavili, bodo programi zamika aktivni na naslednje dni:
Dnevni zamik: Ponedeljek-petek (1.-5. dan)
Nočni zamik: Vse noči
PRIMER:
Recimo, da želite nastaviti grelnik tako za dnevni kot nočni zamik (običajno je
grelnik nastavljen na 23 stopinj). Grelnik mora storiti naslednje:
1. Dnevni zamik aktiviran od 7.30 do 14.30. Želena temperatura: 17 stopinj.
2. Nočni zamik aktiviran od 22.00 do 6.00. Želena temperatura: 18 stopinj.