Inalto IFLW7D40 User manual

MODEL CODE/S
IFLW7D40
7kg/4kg Combo
Washer Dryer
V 1.0 | 0422
USER MANUAL INALTO.HOUSE
FOR ALL AUSTRALIAN HOMES

2
Residentia Group Pty Ltd
ACN. 600 546 656
165 Barkly Avenue
Burnley, Victoria 3121
Australia
—
Applico Ltd
635 Great South Road
Penrose, Auckland 1061
New Zealand
—
InAlto
www.inalto.house
/ inalto.house
/ inalto.house
Congratulations on purchasing
your new InAlto Combo Washer Dryer!
The InAlto brand is proudly distributed within
Australia by Residentia Group Pty Ltd and within
New Zealand by Applico Ltd.
Please refer to the warranty card at the rear of this
manual for information regarding your product’s parts and
labour warranty, or visit online at:
→ www.residentia.group
→ www.applico.co.nz
→ www.inalto.house
Both Residentia Group & Applico are customer obsessed
and our Support Teams are there to ensure you get the
most out of your appliance. Should you want to learn more
about recommended usage, the various features of your
appliance, and importantly taking care of the unit when
cleaning, our Support Teams are here to help.
Telephone Contacts:
→AU: 1300 11 4357
→ NZ: 0800 763 448
It is important that you read through the following use and
care manual thoroughly to familiarise yourself with the
installation and operation requirements of your appliance
to ensure optimum performance.
Again, thank you for choosing an InAlto appliance and we
look forward to being of service to you.
Welcome
Scan to Register your InAlto Appliance or go to:
→ AU: www.inalto.house/registration
→ NZ: www.inalto.house/nz/registration
By registering your product, you will receive advanced
support, stay updated with the latest from InAlto
and find out about new products and promotions.

3
InAlto recommends the use of original spare parts. When contacting our customer
service team on 1300 11 4357, please ensure that you have the following information
at hand (which can be found on your appliances’ rating plate).
• Model Number
• Serial Number
Customer Care
2 Welcome
4 Safety Instructions
7 Your Combo Washer Dryer
8 Installation
10 Control Panel
11 Operating Instructions
17 Cleaning & Maintenance
19 Technical Specifications
20 Troubleshooting
22 Purchase Details
23 Your Receipt
24 Warranty Information
Contents

4
IMPORTANT!
Please read the following safety information thoroughly
and follow it strictly to minimise the risk of fire or
explosion, electric shock and to prevent property
damage, personal injury or loss of life. Failing to follow
these instructions shall void any warranty.
Explanation of the following signal words:
WARNING!
This signal word indicates a potentially dangerous
situation which may result in death or serious injuries
unless it’s avoided.
CAUTION!
This signal word indicates a potentially dangerous
situation which may result in slight or minor injuries or
damage to property and the environment.
NOTE!
This signal word indicates a potentially dangerous
situation which may result in slight or minor injuries.
INTENDED USE
• The product is intended only for home use and for
textiles in household amounts suitable for machine
washing and drying. This appliance is for indoor use
only and not intended for built in use.
• Only use according to these instructions. The
appliance is not intended for commercial use.
• Any other use is considered as improper use. The
producer is not responsible for any damage or injuries
that may result of it.
• This appliance is intended to be used in household
and similar applications such as:
- Sta kitchen areas in shops, oces and other
working environments;
- Farm houses;
- By clients in hotels, motels and other residential type
environments;
- Bed and breakfast type environments;
- Areas for communal use in blocks of flats or in
launderettes.
WARNING! ELECTRIC SHOCK HAZARD
• If the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
• If the machine is damaged, it must not be operated
unless repaired by the manufacturer, its service agent
or similarly qualified persons.
• Risk of electric shock!
CAUTION: RISK TO CHILDREN!
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• Children 3 years and under shall be kept away from
the appliance or continuously supervised.
• Animals and children may climb into the machine.
Check the machine before every operation.
• Do not climb or sit on the appliance.
• The glass door may become very hot during the
operation. Keep children and pets far away from the
machine while it is operating.
INSTALLATION POSITIONING
• All washing and additional substances are to be kept
in a safe place out of the reach of children.
• Do not install the machine on a carpet floor.
• Keep the appliance clear from heating sources and
direct sunlight to avoid damage to parts.
• Do not use the appliance in humid environments or
rooms containing explosive or caustic gas. In case of
water leakage or water splashes let the appliance dry
in the open air.
• The appliance must not be installed behind a lockable
door, a sliding door or a door with a hinge on the
opposite side to that of the washer dryer, in a way
that a full opening of the appliance door is restricted.
• Do not operate the machine in rooms with a
temperature of below 5°C. This can cause damages
to parts of it. If it is unavoidable, make sure to drain
the water completely from the appliance after every
use to avoid damages caused by frost.
• Never use flammable sprays or substances in the
immediate proximity of the appliance.
INSTALLATION
• The maximum inlet water pressure: 1.0Mpa.
• The minimum inlet water pressure: 0.05Mpa.
• Remove all packaging material and transport bolts
before using the appliance. Otherwise, serious
damage may occur.
• This appliance is equipped with a single inlet valve
and can be connected to the cold water supply only.
• Mains plug must be accessible after installation.
• Before washing clothes for the first time, the product
shall be operated once throughout all the procedures
without any clothes inside.
• Do not put any excessively heavy objects on the
appliance, like water containers or heating devices.
• The new hose-sets supplied with the appliance are to
be used and old hose-sets should not be reused.
Safety Instructions

5
ELECTRICAL CONNECTION
• Make sure the supply cable is not trapped by the
machine, as it could get damaged.
• Connect the product to a grounded outlet protected
by a fuse complying with the values in the “ Technical
specifications“ table.
• The grounding installation has to be made by a
qualified electrician.
• Ensure that the machine is installed in accordance
with the local regulations.
• Water and electrical connections must be carried
out by a qualified technician in accordance with
the manufacturer‘s instructions and local safety
regulations.
WARNING!
• Don´t use multiple plugs or extension cords.
• The appliance must not be supplied through an
external switching device, such as a timer,or
connected to a circuit that is regularly switched on
and o by a utility.
• Do not pull the plug out of the mains outlet if there is
flammable gas around.
• Never pull out power plug with wet hands.
• Always pull at the plug, not at the cable.
• Always unplug the appliance if it is not being used.
WATER CONNECTION
• Check the connections of the water inlet tubes, the
water tap and the outlet hose for possible problems
due to changes of water pressure. If the connections
loosen or leak close the water tap and get it repaired.
• Do not use the appliance before the pipes and hoses
are installed properly by qualified persons.
• The water inlet and outlet hoses have to be safely
installed and remain undamaged. Otherwise, water
leakage can occur.
• Do not remove the drain pump filter while there
is still water in the appliance. Big quantities of water
can leak out, and there is a risk of scalding due to
hot water.
OPERATION AND MAINTENANCE
• Never use any flammable, explosive or toxic solvents.
Do not use gasoline and alcohol etc. as detergents.
Only select detergents that are suitable for machine
washing.
• Make sure that all pockets are emptied. Sharp and
rigid items such as coins, brooches, nails, screws,
stones etc. may cause serious damages to this
machine.
• Remove all objects from pockets such as lighters and
matches before use the appliance.
• Do not dry unwashed items in the appliance.
• Items that have been soiled with substances such
as cooking oil, acetone, alcohol, petrol, kerosene,
spot removers, turpentine, waxes and wax removers
should be washed in hot water with an extra amount
of detergent before being dried in the appliance.
• Items such as foam rubber (latex foam), shower
caps, waterproof textiles, rubber backed articles
and clothes or pillows fitted with foam rubber pads
should not be dried in the appliance.
• Fabric softeners, or similar products, should be used
as specified by the fabric softener instructions.
• Fill steam generators only with liquids specified by
the manufacturer.
• Oil-aected items can ignite spontaneously,especially
when exposed to heat sources such as in a washer
dryer. The items become warm,causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat
cannot escape, the items can become hot enough
to catch fire. Piling, stacking or storing oil-aected
items can prevent heat from escaping and so create
a fire hazard.
• If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been contaminated
by hair care products be placed in the washer dryer
they should first be washed in hot water with extra
detergent - this will reduce, but not eliminate, the
hazard.
• Never try to open the door forcefully. The door will
unlock shortly after the end of a cycle.
• Please do not close the door with excessive force. If it
is found dicult to close the door, please check if the
clothes are properly inserted and distributed.
• Lint must not to be allowed to accumulate around
the appliance.
• Always unplug the appliance and close the water tap
before cleaning and maintenance and after each use.
• Never pour water over the appliance for cleaning
purpose. Risk of electric shock!
• Repairs shall only be carried out by the manufacturer,
its service agent or similarly qualified persons in
order to avoid a hazard. The producer will not be
responsible for damages caused by the intervention
of not authorized persons.

6
BEFORE TRANSPORT:
• Transport bolts shall be reinstalled to the machine
by a specialised person.
• Accumulated water shall be drained out
of the machine.
• This appliance is heavy. Transport with care. Never
hold any protruding part of the machine when lifting.
The machine door cannot be used as a handle.
DISPOSAL OF PACKAGING
• The packaging is designed to protect the appliance
from damage during transportation. The packaging
materials are environmentally friendly and should be
recycled. Recycling the packaging can reduce the use
of raw materials in the manufacturing process and
the amount of waste in landfill sites.
Safety Instructions (Cont.)

7
IFLW7D40
NOTE!
The images in this user manual are for reference only. Your appliance may appear dierently.
ACCESSORIES
Your Combo Washer Dryer
INSTALLATION
Accessories
Product Description
4 x Cover caps 1 x Supply hose
cold water
• The product picture is for illustration only, please refer to real product as
reference.
Note!
Drum
Power supply cord
Control panel
Detergent dispenser
Service flap
Door
Water supply hose
Top cover
Drain hose
1 x Owner’s manual
9
Detergent
Dispenser
Door Service Flap
Drum
Power Cord
4 × Cover
Caps
Drain Hose
Top Cover
Control
Panel
INSTALLATION
Accessories
Product Description
4 x Cover caps 1 x Supply hose
cold water
• The product picture is for illustration only, please refer to real product as
reference.
Note!
Drum
Power supply cord
Control panel
Detergent dispenser
Service flap
Door
Water supply hose
Top cover
Drain hose
1 x Owner’s manual
9
1 × Cold Water
Supply Hose
User
Manual
Water
Supply Hose

8
Installation
IMPORTANT!
If the power cord is damaged, it must be replaced by Residentia Group or one of it’s authorised service
representatives. Please contact 1300 11 HELP (4357) and ensure the appliance is completely disconnected from
the power supply.
TRANSPORT
Move cautiously. Do not grasp any salient parts of machine. The machine door cannot be used as the handle
for transport.
If the appliance can't be transported upright the unit can be tilted at an angle no less than 30°.
Risk of injury and damage! Improper handling of the appliance may result in injury.
• The appliance is very heavy. Never transport or carry the appliance alone; always with the assistance
of another person.
• Remove all obstacles on the transport route and from the installation location, e.g. open doors and
clear away objects lying on the floor.
• Do not use the open door as a handhold.
• Remove all package material before using the appliance.
• Before setting up the washer dryer, check it for any externally visible damage.
Do not install or use a damaged unit.
• Do not install the unit in a room where there is a risk of frost occurring. At temperatures around freezing
point the unit may not be able to operate properly. There is a risk of damage if the condensed water is
allowed to freeze in the pump and hoses.
INSTALLATION POSITIONING
Ensure that the installation position adheres to the following conditions;
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sucient ventilation
4. Room temperature is above 5°C
5. Keep far away from the heat sources such as coal or gas burning appliances
UNPACKING YOUR WASHER DRYER
WARNING! Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of
suocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washer dryer and remove the base packaging. Make sure the small triangle foam (a) is removed
with the bottom packaging together. If not, lay the unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
INSTALLATION
Installation
Before installing the machine, the location characterized
as follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0°C
5.Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the washer dryer
1. Remove the cardboard box and styrofoam packing.
2. Lift the washer dryer and remove the base packaging.Make sure the small triangle
foam (a) is removed with the bottom packaging together. If not, lay the unit down on
the side surface and remove it manually.
4. Remove the inlet hose from the drum.
3. Remove the tape securing the power supply cord and drain hose.
• Stability is important to prevent the product from
wandering! Make sure the machine is standing leveled and
stable.
• Make sure that the product does not stand onto the power
cord.
• Make sure to maintain the minimum distances from the
walls as shown in the picture
Warning!
• Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
• There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
w
w
W> 20mm
Installation area
a
10

9
REMOVING TRANSPORT BOLTS
WARNING! You must remove the transport bolts from the backside before using the product.
LEVELING THE WASHER DRYER
WARNING! The lock nuts on all four feet must be screwed tightly against the housing.
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a spanner. Make sure the machine is level and steady.
CONNECTING THE WATER SUPPLY HOSE
To prevent leakage or water damage, ensure you follow the instructions below;
• Do not kink, crush or modify water inlet hose.
• Connect the water supply hose to the water inlet valve and a water tap with cold water as indicated.
NOTE! Connect manually, do not use tools. Check if the connections are tight.
DRAIN HOSE
• Do not kink or protract the drain hose.
• Position drain hose properly, otherwise damage might result of water leakage.
There are two ways to place the end of drain hose
1. Put it into the water trough.
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
INSTALLATION
Remove transport bolts
• You must remove the transport bolts from the backside before using the product.
Warning!
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
and keep them for future
use.
Close the holes using the
cover caps.
Levelling the washer dryer
• The lock nuts on all four feet must be screwed tightly against the housing.
Warning!
1. Loosen the lock nut.
2. Turn the foot until it reaches the floor.
3. Adjust the legs and lock the nuts with a
spanner. Make sure the machine is level and
steady.
Connect the water supply hose
To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush or modify water inlet hose.
Warning!
Connect the water supply hose
to the water inlet valve and a
water tap with cold water as
indicated.
• Connect manually, do not use tools. Check if the connections are tight.
Note!
11
Loosen the 4 transport
bolts with a spanner.
Remove the bolts
including the rubber parts
(keep them in a safe place
for future use).
Close the holes using the
cover caps.
2. Connect it to the branch drain pipe of the trough.
INSTALLATION
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Warning!
Water
trough
100cm
Max.
Min.60cm
100cm
Max.
100cm
Max.
Min.60cm
12
INSTALLATION
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Warning!
Water
trough
100cm
Max.
Min.60cm
100cm
Max.
100cm
Max.
Min.60cm
12

11
BEFORE FIRST USE
Leave your unit to stand for 2 hours after transporting.
CAUTION!
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove any residual water and to neutralize
potential odors, it’s recommended to clean your appliance before first use. For this reason, start the Cotton
program at 90°C without laundry and detergent.
BEFORE WASHING
• The ambient temperature of the washer dryer should be 5-40°C. If used under 0°C, the inlet valve and draining
system may be damaged. If the machine is installed under freezing conditions, it should be transferred to normal
ambient temperature to ensure the water supply hose and drain hose can unfreeze before use.
• Please check your laundry care labels and the detergent use instructions before wash. Use non-foaming
detergent suitable for machine washing.
WARNING!
• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or dabbed with combustible
or explosive substances like wax, oil, paint, gasoline, alcohol, kerosene, and other flammable materials.
• Washing single clothes items may easily create big eccentricity and cause alarm due to unbalance. Therefore
it is suggested to add one or two more laundry items to the wash so that spin can be done smoothly.
Operating Instructions
• Do not wash or dry articles that have been cleaned in, washed in, soaked in,
or dabbed with combustible or explosive substances like wax, oil, paint,
gasoline, alcohol, kerosene, and other flammable materials.
• Washing single clothes items may easily create big eccentricity and cause
alarm due to unbalance. Therefore it is suggested to add one or two more
laundry items to the wash so that spin can be done smoothly.
• The ambient temperature of the washer dryer should be 5-40°C. If used under
0°C, the inlet valve and draining system may be damaged. If the machine is
installed under freezing conditions, it should be transferred to normal ambient
temperature to ensure the water supply hose and drain hose can unfreeze before
use.
• Please check your laundry care labels and the detergent use instructions before
wash. Use non-foaming or less-foaming detergent suitable for machine
washing properly.
Tie together long textile
strips and belts, close zips
and button
Take all items out of the
pockets
Put small items into a
laundry bag
C
heck the care label
Before Each Washing
Turn easy-pilling and
long-pile fabric inside out
Sort laundry according to
color and textile type
Warning!
OPERATION
1 2 3
4 5 6
14
Check the care label
1
Sort laundry by colour
and textile type
2
Remove all items
from pockets
3
Tie together long
textile strips/belts and
close zips and buttons
4
Place small items into
a laundry bag
5
Turn items prone to
pilling or long-pile
fabric inside out
6

12
Operating Instructions (Cont.)
STARTING A WASHING/DRYING PROGRAM
NOTE! Detergent need to be added in Compartment I if the pre-wash function is selected.
SETTING YOUR WASHING/DRYING SETTINGS
AFTER WASHING/DRYING
The buzzer will sound and 'End' will show on the display screen.
DETERGENT DISPENSER
Pre wash Compartment
Main wash Compartment
Softener Compartment
Release button to pull
out the dispenser
CAUTION! Detergent only need to be added in "Compartment I" after selecting pre-wash function.
*Denotes a function that includes drying or drying option.
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
1
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
2
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
3
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
4
Plug in Open tap Load Close door
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
5
Add detergent
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
1
Select
program
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
2
Customise your
program or add any
additional functions
• Before washing, please make sure the washer dryer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it’s recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
Quick Start
Caution!
OPERATION
2. Washing
Buzzer beep and “End” on display.
3. After Washing
1. Before Washing
Open tap
Load
Close door
Plug in
Add detergent
• Detergent need to be added in compartment I if the pre-wash function is selected.
1122334455
Note!
Main
wash
Prewash
Softener
ear th
terminal
Select programme Select function or
remain default
settings
Press
Start/Pause to
start the program
1 2 3
13
3
Press Start/Pause to
start the program
Detergent Dispenser
Caution!
• Detergent only need to be added in "compartment I “after selecting
pre-wash function.
OPERATION
Pre wash
Main wash
Softener
II
I
Release button to
pull out the dispenser
Programme
Sport Wear
Quick 15’
Jeans
Delicate
Spin Only
Rinse & Spin
Cotton ECO
20
Means must ○ Means optional
Programme
*Dry Only
*Synthetic
*Mix
*1Hour W/D
*Cotton
*Wash&Dry
Intensive
15
Model:MFN70-DS1403/C31E-AU(25)
Detergent Dispenser
Caution!
• Detergent only need to be added in "compartment I “after selecting
pre-wash function.
OPERATION
Pre wash
Main wash
Softener
II
I
Release button to
pull out the dispenser
Programme
Sport Wear
Quick 15’
Jeans
Delicate
Spin Only
Rinse & Spin
Cotton ECO
20
Means must ○ Means optional
Programme
*Dry Only
*Synthetic
*Mix
*1Hour W/D
*Cotton
*Wash&Dry
Intensive
15
Model:MFN70-DS1403/C31E-AU(25)
Detergent Dispenser
Caution!
• Detergent only need to be added in "compartment I “after selecting
pre-wash function.
OPERATION
Pre wash
Main wash
Softener
II
I
Release button to
pull out the dispenser
Programme
Sport Wear
Quick 15’
Jeans
Delicate
Spin Only
Rinse & Spin
Cotton ECO
20
Means must ○ Means optional
Programme
*Dry Only
*Synthetic
*Mix
*1Hour W/D
*Cotton
*Wash&Dry
Intensive
15
Model:MFN70-DS1403/C31E-AU(25)
Detergent Dispenser
Caution!
• Detergent only need to be added in "compartment I “after selecting
pre-wash function.
OPERATION
Pre wash
Main wash
Softener
II
I
Release button to
pull out the dispenser
Programme
Sport Wear
Quick 15’
Jeans
Delicate
Spin Only
Rinse & Spin
Cotton ECO
20
Means must ○ Means optional
Programme
*Dry Only
*Synthetic
*Mix
*1Hour W/D
*Cotton
*Wash&Dry
Intensive
15
Model:MFN70-DS1403/C31E-AU(25)
Detergent Dispenser
Caution!
• Detergent only need to be added in "compartment I “after selecting
pre-wash function.
OPERATION
Pre wash
Main wash
Softener
II
I
Release button to
pull out the dispenser
Programme
Sport Wear
Quick 15’
Jeans
Delicate
Spin Only
Rinse & Spin
Cotton ECO
20
Means must ○ Means optional
Programme
*Dry Only
*Synthetic
*Mix
*1Hour W/D
*Cotton
*Wash&Dry
Intensive
15
Model:MFN70-DS1403/C31E-AU(25)
Detergent Dispenser
Caution!
• Detergent only need to be added in "compartment I “after selecting
pre-wash function.
OPERATION
Pre wash
Main wash
Softener
II
I
Release button to
pull out the dispenser
Programme
Sport Wear
Quick 15’
Jeans
Delicate
Spin Only
Rinse & Spin
Cotton ECO
20
Means must ○ Means optional
Programme
*Dry Only
*Synthetic
*Mix
*1Hour W/D
*Cotton
*Wash&Dry
Intensive
15
Model:MFN70-DS1403/C31E-AU(25)
Program Program
Quick 15' *Synthetic
Delicate *1 Hour Wash & Dry
20˚C
*Wash & Dry
Rinse & Spin
Sportswear *Dry Only
Jeans *Mix
Spin Only *Cotton
Cotton ECO Intensive
OptionalRequired

13
WASHING/DRYING PROGRAMS
Intensive
For especially dirty clothes the washing intensity is
increased for a more thorough wash.
Sportswear
A wash cycle perfect for washing activewear.
Quick 15'
A short 15 minute wash cycle that is perfect for washing
small amounts of lightly soiled clothing.
Jeans
A wash cycle perfect for washing denim clothing.
Delicate
A washing program suitable for delicate, washable
textiles, e.g. silk, satin, synthetic fibres or blended
fabrics.
20°C
A cold wash cycle that is suitable for washing brightly
colored clothes, as it protects the colours better.
Cotton ECO
A wash cycle perfect for lightly soiled clothing operating
at 40°C, reducing your impact.
Spin Only
A spin only cycle that is suitable for removing any excess
moisture from your laundry with the option to select the
spin speed.
Rinse & Spin
Provides an extra rinse for your washing load and then
spins it to ensure all excess moisture is removed from
your clothing.
* Dry Only
Select this program to run a dry only cycle. You can select
the temperature and the drying time will run according
to the load.
* Synthetic
Suitable for washing synthetic clothing items such as
shirts or coats. Drying is an option at the end of this
cycle.
* Mix
Suitable for washing a mixed clothing of cotton or
synthetics. Drying is an option at the end of this cycle.
* Wash & Dry
The standard program to provide a wash and dry for your
clothing load.
* 1 Hour Wash & Dry
A shorter 1 hour cycle for washing and drying a small
amount of lightly soiled clothing.
* Cotton
Suitable for washing cotton or similar heart-resistant
textiles made of cotton and synthetics. Drying is an
option at the end of this cycle.
Drum Clean
A dedicated cycle to clean the inside of you
washing/drying drum. Operating at a high temperature
of 90°C to sterilise the drum. When this program is
performed, the drum must be empty. Add a chlorine
bleaching agent to enhance the cleaning eect. This
program can be used as often as desired when required.
*Denotes a function that includes drying or
drying option.

14
USING THE ADDITIONAL FUNCTIONS
DELAY FUNCTION
This function is used for delaying the start of the drying program up to 24 hours. When the delayed program
starts, the time starts to countdown on the display and the delay icon blinks.
1. Load your laundry and make sure the machine door is closed.
2. Press the On/O button, then use the program selector knob to select the desired program.
3. Press the Delay button to select the desired delay time.
4. Then press the Start/Pause button and the appliance will be in standby and the delay time will start
counting down. The drying procedure will be automatically performed when the delay time is over.
To cancel the Delay function, press the “Delay” button before starting the program until the display shows 0h.
If the program has already started, switch the appliance o and afterwards on and select a new program.
SPIN SPEED
When needed, the spin speed can be adjusted pressing the Speed button to cycle through the options in the
following order: 0-400-600-800-1000-1200-1400.
TEMPERATURE
When needed, the washing temperature can be adjusted by pressing the temperature button to cycle through
the options in the following order: Cold - 20°C- 40°C - 60°C - 90°C.
MUTING THE BUZZER
Follow the step below to mute the machine buzzer so there will be no sound once your program has ended.
Once your desired program is set press the Speed button for 3 seconds to mute the buzzer. To turn the buzzer
back on hold the Speed button for 3 seconds again.
DRY LEVEL
Press the Dry button continuously to choose the dryness level of your drying cycle. It will cycle through the
options in the following order; Soft Dry - Extra Dry - Normal Dry - Timer Dry.
Soft Dry: For clothing that you require to be moderately dry.
Extra Dry: For clothing that you require to be completely dry.
Normal Dry: The normal dry procedure.
Timer Dry: Choose this function to dry clothes for a specific time.
NOTE: Drying hints
• To ensure a quality dry ensure you separate textiles according to their drying requirements.
• If you want to iron the clothes after drying, ensure they are completely dry.
NOTE: Clothes not suitable for drying
• Particularly delicate items such as synthetic curtains, wool, silk, clothes with metal inserts,nylon
stockings, bulky clothes, such as bedcovers, quilts, sleeping bags and duvets must not be dried.
• Clothes padded with foam-rubber or similar materials must not be machine dried.
• Fabrics containing residue of any lotions or hair sprays, nail solvents or similar solutions must not be
machine dried in order to avoid the formation of harmful vapours.
CHILD LOCK
This machine incorporates a special child safety lock, which can prevent children from carelessly pressing
buttons and doing damage to themselves or the appliance.
1. When the drying cycle is running, press the Anti-Crease button at the same time for 3 seconds to start
the child lock function.
2. When child lock function is set, the display will show Child lock icon and all button are deactivated,
except the On/O button.
3. To deactivate the child lock function, the Anti-Crease button shall be pressed at the same time for
3 seconds.
OPERATION
Note!
• Drying hints
- Clothes could be dried after spinning
- To ensure quality dry the textiles,please classify them according to their
kinds and the drying temperature.
- Synthetic should be set the proper drying time .
- If you want to iron the clothes after drying,please put them for a while.
• Clothes not suitable for drying
- Particularly delicate items such as synthetic curtains,woolen and silk,
clothes with metal inserts,nylon stockings,bulky clothes,such as
anoraks,bedcovers,quilts,sleeping bags and duvets must not be dried.
- Clothes padded with foam-rubber or materials similar to foam-rubber
must not be machine dried.
- Fabrics containing residues of setting lotions or hair sprays, nail
solvents or similar solutions must not be machine dried in order to avoid
the formation of harmful vapours.
Dry Level
Press the Dry button continuously to choose the dry level: Soft DryExtra Dry/
Normal Dry/ Timer Dry.
Soft Dry: Only to dry slightly and then is just ok;
Extra Dry:Need to wear clothes immediately ,we can choose this function
Normal Dry:The normal dry procedure
Timer Dry: We can choose this function to dry clothes for a specific time.
25
Operating Instructions (Cont.)

15
USING THE ADDITIONAL FUNCTIONS (CONT.)
CHILD LOCK
This machine incorporates a special child safety lock, which can prevent children from carelessly pressing
buttons and doing damage to themselves or the appliance.
• Press the Temp and Dry button at the same time for 3 seconds to activate the child lock.
CAUTION!
When the Child Lock is activated, the display will alternately show “CL” and the remaining time.
Pressing any other button will cause the Child Lock indicator to flash for 3 sec. When the program ends, “CL”
and “END” will alternate on the display for 10 sec, then the indicator will flash for 3 sec.
The Child Lock deactivates the function of all buttons except the Child lock button!
Only the simultaneous pressing of the two buttons Temp and Dry can deactivate the Child Lock!
Please deactivate the Child Lock before selecting a new program!
DRUM CLEAN
The machine will alert you that it is time to run a Drum Clean cycle by flashing the drum clean light after
every 25 cycles.
To start counting down again;
• Press and hold the Drum Clean button for 3 seconds, the Drum Clean reminder will turn o and the
machine will recount another 25 cycles.
• Alternatively, the counted cycles will be recounted once a drum clean program is finished.

16
WASHING/DRYING PROGRAMS TABLE
PROGRAM LOAD (KG) DISPLAY TIME DEFAULT TEMP.
(°C)
DEFAULT SPIN
SPEED (RPM)
ADDITIONAL
FUNCTIONS
Intensive 7.0 3:48 40 800 Delay
Sportswear 3.5 0:45 20 800 Delay
Quick 15' 2.0 0:15 Cold 800 Delay
Jeans 7.0 1:32 20 800 Delay
Delicate 2.5 0:49 20 800 Delay
20˚C 3.5 1:01 20 1000 Delay
Cotton ECO 7.0 0:59 20 1000 Delay
Spin Only 7.0 0:12 - 1000 Delay
Rinse & Spin 7.0 0:20 - 1000 Delay
*Dry Only 4.0 4:14 - 1400 Delay
*Synthetic 3.5/3.5 1:28 40 800 Delay
*Mix 7.0/4.0 0:58 40 1000 Delay
*Wash & Dry 3.5 5:24 40 1400 Delay
* 1 Hour Wash & Dry 1.0 0:58 Cold - Delay
*Cotton 7.0/4.0 1:28 40 1000 Delay
Drum Clean - 1:18 90 - Delay
*Denotes a function that includes drying or the option to dry
TESTING NOTES
Energy test program: Cotton ECO, 60°C
Speed: the highest speed; Other as the default.
Half load for 7.0kg machine: 3.5kg.
“Cotton ECO, 60°C ” is the standard washing programs to which the information in the label and the fiche relates,
and they are suitable to clean normally soiled cotton laundry and that they are the most ecient programs in
terms of combined energy and water consumptions for washing that type of cotton laundry, that the actual water
temperature may dier from the declared cycle temperature.
The parameters in this table are only for user's reference.
The actual parameters may be dierent to those in the table above.
Operating Instructions (Cont.)

17
Cleaning & Maintenance
CLEANING AND CARE
WARNING! Always unplug the appliance and close the water tap before cleaning and maintenance.
CLEANING THE CABINET
Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is any water overflow, use a cloth to wipe it o immediately.
Never use sharp items to clean the appliance.
CAUTION! Never use abrasive or caustic agents, acid or its diluted solvents or similar substances, like alcohol or
chemical products.
CLEANING THE DRUM
Any rust stains left inside the drum by metal articles must be removed immediately using chlorine-free detergents.
Never use steel wool for cleaning the drum!
NOTE! Keep any laundry away from the machine while cleaning the drum.
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each wash to remove lint and stains. If lint builds up it can cause leakages. Remove any
coins, buttons and other objects from the seal after each wash. Clean the Door Seal and Glass every month to ensure
the normal operation of the appliance.
CLEANING THE INLET FILTER
NOTE! Diminishing water flow is a sign that the filter needs to be cleaned.
1. Close the tap and remove the water supply hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the backside of the machine. Pull out the filter with long pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and reconnect the water supply hose.
6. Clean the Inlet filter every 3 months to ensure the normal operation of the appliance.
CLEANING THE DETERGENT DISPENSER
1. Press down the release
MAINTENANCE
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter need to be cleaned.
Note!
Clean The Detergent Dispenser
Press the release and
remove the dispenser
drawer
Clean the dispenser
drawer and the softener
cover under water
Clean the recess with
an soft brush
Insert the dispenser
drawer
1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
134
2
1 2
3 4
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
6.Clean the Inlet filter every 3 months to
ensure the normal operation of the
appliance.
• Do not use abrasive or caustic agents to clean plastic parts.
Clean the detergent dispenser every 3months to ensure the normal operation
of the appliance
•
Note!
28
on the softener cover and pull the dispenser drawer out of the recess.
2. Rinse the inside of the dispenser drawer and the softener cover under water.
3. Clean the inside of the recess with a soft brush.
4. Restore the softener cover and push the drawer back into the recess.
NOTE! Do not use abrasive or caustic agents to clean plastic parts.
NOTE! Clean the detergent dispenser every 3 months to ensure the normal operation of the appliance.
MAINTENANCE
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter need to be cleaned.
Note!
Clean The Detergent Dispenser
Press the release and
remove the dispenser
drawer
Clean the dispenser
drawer and the softener
cover under water
Clean the recess with
an soft brush
Insert the dispenser
drawer
1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
134
2
1 2
3 4
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
6.Clean the Inlet filter every 3 months to
ensure the normal operation of the
appliance.
• Do not use abrasive or caustic agents to clean plastic parts.
Clean the detergent dispenser every 3months to ensure the normal operation
of the appliance
•
Note!
28
MAINTENANCE
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter need to be cleaned.
Note!
Clean The Detergent Dispenser
Press the release and
remove the dispenser
drawer
Clean the dispenser
drawer and the softener
cover under water
Clean the recess with
an soft brush
Insert the dispenser
drawer
1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
134
2
1 2
3 4
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
6.Clean the Inlet filter every 3 months to
ensure the normal operation of the
appliance.
• Do not use abrasive or caustic agents to clean plastic parts.
Clean the detergent dispenser every 3months to ensure the normal operation
of the appliance
•
Note!
28
1 2 3 4
MAINTENANCE
Cleaning the Inlet Filter
• Diminishing water flow is a sign that the filter need to be cleaned.
Note!
Clean The Detergent Dispenser
Press the release and
remove the dispenser
drawer
Clean the dispenser
drawer and the softener
cover under water
Clean the recess with
an soft brush
Insert the dispenser
drawer
1. Press down the release [ ] on the softener cover and pull the dispenser
drawer out of the recess. Clean the inside of the recess with a brush.
2. Lift the softener cover off the dispenser drawer and wash both items with water.
3. Restore the softener cover and push the drawer back into the recess.
134
2
1 2
3 4
1. Close the tap and remove the water supply
hose from it.
2. Clean the filter with a brush.
3. Unscrew the water supply hose from the
backside of the machine. Pull out the filter
with long nose pliers.
4. Use a brush to clean the filter.
5. Reinstall the filter to the water inlet and
reconnect the water supply hose.
6.Clean the Inlet filter every 3 months to
ensure the normal operation of the
appliance.
• Do not use abrasive or caustic agents to clean plastic parts.
Clean the detergent dispenser every 3months to ensure the normal operation
of the appliance
•
Note!
28
1 2 3 4

18
CLEANING THE DRAIN PUMP FILTER
• Make sure that the machine has finished the washing cycle and is empty. Switch it o and unplug it before
cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the appliance.
1. Open the lower cover cap.
2. Open the filter by turning it counter clockwise. Note, there may be residual water in the unit that releases when
the filter is opened. Place a shallow tray or towel underneath to collect the water.
3. Remove any foreign objects collected in the filter.
4. Insert the filter back in position and close the cover cap.
CAUTION! When the appliance is in use and depending on the cycle selected there may be water in the drain pump.
Never remove the drain pump filter during a wash cycle, always wait until the cycle has finished and the machine is
empty. When replacing the filter and cover ensure it is securely tightened.
MAINTENANCE
Cleaning the Drain Pump Filter
Open the lower cover cap Open the filter by turning
to the counter clockwise
Remove extraneous matter
1
Close the lower cover cap
4
3
2
•
and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the
appliance.
Make sure that the machine has finished the washing cycle and is empty. Switch it off
Warning!
29
•
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
When the appliance is in use and depending on the programme selected there can
Caution!
MAINTENANCE
Cleaning the Drain Pump Filter
Open the lower cover cap Open the filter by turning
to the counter clockwise
Remove extraneous matter
1
Close the lower cover cap
4
3
2
•
and unplug it before cleaning the drain pump filter.
• Be careful of hot water. Allow the water to cool down. Risk of scalding!
• Clean the filter periodically every 3 months to ensure the normal operation of the
appliance.
Make sure that the machine has finished the washing cycle and is empty. Switch it off
Warning!
29
•
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
When the appliance is in use and depending on the programme selected there can
Caution!
1 2 3 4
Cleaning & Maintenance (Cont.)

19
Technical Specifications
Below outlines the technical specifications for your InAlto Combo Washer Dryer.
Model IFLW7D40
Size 595W � 565D � 850H (mm)
Net Weight 74kg
Rated Power 2050W
Drying Power 1350W
Washing Capacity 7.0kg
Drying Capacity 4.0kg
Rated Frequency 50Hz
Power Supply 220-240V~,50Hz
Max. Current 10A
Standard Water Pressure 0.05MPa~1MPa
Note: The rated capacity is the maximum capacity to be washed or dried at
one time. Make sure that the dry clothes which are loaded into the appliance
do not exceed the rated capacity.
ADDITIONAL INFORMATION FOR STANDARD PERFORMANCE TESTING:
(AS/NZS 2040.1:2005+Amdt1-2007+Amdt2-2009)
1. Water connections: Cold & hot water connection
2. Water supply pressure: 320 kPa
3. Warm wash Program: Cotton Eco, 60°C, Speed 1400rpm, Display: 6:04
Cold wash program: Cotton Cold( no temperature display is cold wash)
4. Detergent type: Drum detergent
5. Detergent quantity: Default
6. Adding detergent:
The detergent is dissolved and added as Paragraph B7.3 of AS/NZS 2040.1
The detergent shall be dissolved in 1 L of water
7. Anti-sudsing agent: Max
8. Test load mass: 7.0kg
9. Water consumption: 71L
10. Test Voltage: 220-240V~,50Hz
Cleaning & Maintenance (Cont.)

20
Troubleshooting
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch o all controls.
• Switch the appliance o at the power point or at the fuse box.
• Call the Residentia Support Team on 1300 11 HELP (4357).
Some minor faults can be fixed by referring to the instructions given in the Troubleshooting section
below. There is also a self-help section online at https://support.residentiagroup.com.au/
TROUBLESHOOTING
DESCRIPTION POSSIBLE CAUSE SOLUTION
Appliance does not
start
Door is not closed properly.
Clothes are stuck.
Close the door properly and restart.
Check the laundry.
Door can´t be opened Safety protection is activated. Disconnect the power and restart.
Water leakage Connections are not tight enough. Check and fasten the water inlet pipe.
Check and clean the outlet hose.
Detergent residues
in the detergent
dispenser
Detergent is damp and/or clotted. Clean and wipe the detergent
dispenser dry.
Indicator or display
does not work
PC board or harness have.
connection problems.
Switch o the power and check if the
mains plug is connected properly.
Abnormal noise Transport bolts still in place.
Floor is not solid or level.
Check if the transport bolts have been
removed.
Make sure the appliance is installed on
a solid and level floor.
ERROR CODES
DESCRIPTION POSSIBLE CAUSE SOLUTION
E30 Door is not closed properly. Close the door properly and restart.
E10 Water injecting problem during
wash cycle.
Check if the water pressure is high
enough.
Straighten the water pipe.
Clean the inlet valve filter.
E21 Overtime water draining. Check the drain hose for blockage.
E12 Water overflow. Restart the appliance.
EXX Others. Restart the appliance. If problem
persists, please contact the
customer service.