Electrolux EWM21xx User manual

SERVICE MANUAL
WASHING
©ELECTROLUX HOME PRODUCTS
ITALY S.p.A.
Spares Operations Italy
Corso Lino Zanussi, 30
Publication no.
I - 33080 PORCIA /PN 599 70 39-88
Fax [phone]
Edition: 2007-08-11
EN
Washing machines
&
Washer-dryers
with electronic control
system
EWM21xx
EWM25xx
Technical and functional
characteristics
ENV06
AEG Styling
SERIES 6 / 7

SOI/DT 2007-11 dmm 2/69 599 70 39-88

SOI/DT 2007-11 dmm 3/69 599 70 39-88
CONTENTS
1Purpose of this manual....................................................................................................................................5
2PRECAUTIONS...............................................................................................................................................5
3SERIES 6.........................................................................................................................................................6
3.1 GENERAL CHARACTERISTICS..............................................................................................................6
3.1.1 General characteristics WM ..............................................................................................................6
3.1.2 General characteristics WD...............................................................................................................7
3.2 CONTROL PANEL ...................................................................................................................................8
3.2.1 Styling SERIES 6...............................................................................................................................8
3.2.2 Configuration of control panel ...........................................................................................................9
3.2.3 Programme selector (S1) ..................................................................................................................9
3.2.4 Programme configuration..................................................................................................................9
3.2.5 Pushbuttons – LEDs and LCD ........................................................................................................10
4SERIES 7.......................................................................................................................................................13
4.1 GENERAL CHARACTERISTICS............................................................................................................13
4.1.1 General Characteristics WM............................................................................................................13
4.1.2 General Characteristics WD............................................................................................................14
4.2 CONTROL PANEL .................................................................................................................................15
4.2.1 Styling SERIES 7.............................................................................................................................15
4.2.2 Configuration of control panel .........................................................................................................16
4.2.3 Programme selector (S1) ................................................................................................................16
4.2.4 Pushbuttons and LCD SERIES 7 Special.......................................................................................17
4.2.5 Pushbuttons and LCD Version WD Series 7...................................................................................22
4.2.6 DEMO MODE SETTING .................................................................................................................24
4.3 Exiting DEMO mode...............................................................................................................................24
5DIAGNOSTICS SYSTEM ..............................................................................................................................24
5.1 Access to diagnostics mode...................................................................................................................24
5.2 Exiting diagnostics mode........................................................................................................................24
5.3 Diagnostics phases.................................................................................................................................25
6ALARMS ........................................................................................................................................................27
6.1 Displaying the alarms to the user ...........................................................................................................27
6.2 Reading the alarm codes........................................................................................................................27
6.2.1 Displaying the alarm........................................................................................................................28
6.2.2 Examples of alarm display...............................................................................................................28
6.2.3 Operation of alarms during diagnostics...........................................................................................28
6.3 Rapid reading of alarm codes.................................................................................................................29
6.4 Cancelling the last alarm ........................................................................................................................29
7OPERATING TIME COUNTER .....................................................................................................................30
7.1.1 Reading of operating time ...............................................................................................................30
7.1.2 Display of total operating time with LEDs........................................................................................30
8WASHING PROGRAMMES AND OPTIONS WM.........................................................................................31
8.1 Options (for appliances EWM 21xx with universal motor)......................................................................31
8.2 Options (for appliances EWM 25xx with asynchronous motor and inverter)..........................................32
9DRYING PROGRAMMES AND WD OPTIONS.............................................................................................34
9.1 EWM21xx & 25xx ...................................................................................................................................34
9.2 Description of options.............................................................................................................................36
10 TECHNICAL CHARACTERISTICS............................................................................................................38
10.1 Control system memory......................................................................................................................38
10.1.1 General structure of the memory system........................................................................................38
10.1.2 FLASH.............................................................................................................................................38
10.1.3 RAM.................................................................................................................................................39
10.2 Door interlock......................................................................................................................................40
10.2.1 Voltmetric interlock with PTC...........................................................................................................40
10.2.1.1 Operating principle...................................................................................................................40
10.2.2 Instantaneous door interlock ...........................................................................................................41
10.2.2.1 Operating principle...................................................................................................................41
10.2.2.2 Conditions required for opening the door.................................................................................41
10.2.2.3 Automatic unlock......................................................................................................................41
10.3 Water fill system..................................................................................................................................42
10.3.1 Flow meter.......................................................................................................................................42
10.3.2 Operating principle of flow meter.....................................................................................................43
10.4 Analogue pressure switch of water level control in the tub.................................................................44
10.5 11.5 Drain pump..................................................................................................................................44
10.5 11.5 Drain pump..................................................................................................................................45
10.6 Recirculation pump (if featured)..........................................................................................................45

SOI/DT 2007-11 dmm 4/69 599 70 39-88
10.7 Heating................................................................................................................................................46
10.8 Temperature sensor............................................................................................................................46
10.9 Universal motor (EWM 21xx)..............................................................................................................47
10.9.1 Power supply to motor.....................................................................................................................47
10.10 Three-phase asynchronous motor (EWM25xx)..................................................................................47
10.10.1 Power supply to motor.................................................................................................................47
10.11 Anti-foam control system.....................................................................................................................48
10.12 “FUCS” (Fast Unbalance Control System)..........................................................................................49
11 DRYING CIRCUIT......................................................................................................................................51
11.1 Temperature control............................................................................................................................52
Calculating the drying time:............................................................................................................................52
11.2 Table of alarm codes...........................................................................................................................53
11.3 Diagram WM with UNIVERSAL MOTOR EWM 21xx .........................................................................57
11.4 Diagram WM with THREE-PHASE ASYNCHRONOUS MOTOR EWM 25xx....................................59
11.5 Diagram WD with UNIVERSAL MOTOR EWM 21xx..........................................................................61
11.6 Diagram WD with THREE-PHASE ASYNCHRONOUS MOTOR EWM 25xx ....................................63
12 ACCESSIBILITY TO THE ELECTRONIC CONTROL SYSTEM ...............................................................65
12.1 WM Version.........................................................................................................................................65
12.1.1 Work top ..........................................................................................................................................65
12.1.2 Control panel...................................................................................................................................65
12.2 WD VERSION.....................................................................................................................................67
12.2.1 Work top ..........................................................................................................................................67
12.2.2 Control panel...................................................................................................................................67

SOI/DT 2007-11 dmm 5/69 599 70 39-88
1 Purpose of this manual
The purpose of this manual is to provide service engineers who are already familiar with the repair procedures
for traditional washing machines with information regarding appliances fitted with the ENV06 electronic control
system and produced in Porcia (Italy) and Olawa (Poland).
The characteristic of the ENV06 electronic control system is to use only an electronic pressure switch to check
the various water levels in the tub (with the elimination of the mechanical pressure switches: anti-overflow, anti-
boiling, 1st-2nd level), and a new heater with two thermal fuses which interrupt if the temperature degree
overcomes the values by which they are calibrated.
The following are described:
•general characteristics
•control panel and washing programmes
•technical and functional characteristics
•access to the electronic control system
For detailed information concerning hydraulic circuit, structural characteristics of the appliances and
accessibility, please refer to Service Manual:
•Publication no. 599 37 67-82 – washing machines with HEC-ARCHED cabinet.
Identification table between styling (SERIES 6 / 7) and functionality (EWM 21xx/25xx)
Styling EWM 21xx EWM 25xx
Washing type Motor Washing type Motor
SERIES
6
•Traditional with ECO-BALL
•Jet-System Universal •Traditional with ECO-BALL
•Jet-System Three-phase
asynchronous
with Inverter
SERIES
7 -------------------------- -----------
•Traditional with ECO-BALL
•Jet-System Three-phase
asynchronous
with Inverter
2 PRECAUTIONS
Electrical appliances must be serviced only by qualified Service Engineers.
Always remove the plug from the power socket before touching internal
components.
In case of replacement of the heater, replace it with one with the same
characteristics in order not to compromise the safety of the appliance.

SOI/DT 2007-11 dmm 6/69 599 70 39-88
3 SERIES 6
3.1 GENERAL CHARACTERISTICS
The ENV060 electronic control system consists of a
single PCB, which incorporates the power, control and
display (where the LCD is connected) functions. The
programme selector is incorporated in the board.
The PCB is mounted on a casing fitted to the control
panel.
3.1.1 General characteristics WM
Version
SERIES 6
Version
SERIES 6 Special
Number of buttons Max. 7 (6 options + start/pause)
Number of LEDs Max. 12 + LCD
Programme selector 21 positions with main switch (incorporated in the PCB )
Serial port DAAS-EAP communications protocol up to 115.200 baud
Power supply 220/240V
50/60 Hz (configurable)
Type of washing Traditional with “eco-ball” sphere
Jet-system
Rinsing system Traditional with “eco-ball” sphere
Jet-system
Motor Collector, with tachometric generator Two-pole asynchronous, with three-phase tachometric generator
(with Inverter)
Spin speed 1000 ÷1600 rpm
Anti-unbalancing system FUCS
Water fill 1 solenoid valve with 1 inlet – 2/3 outlets
Detergent drawer 3/4 compartments: prewash/stains, wash, conditioners
Control of water level in the
tub Electronic/analogue pressure switch
Door safety device Traditional (with PTC)
Instantaneous
Power of heating element 1950W with thermal fuses incorporated
Temperature control NTC sensor incorporated in the heater
Buzzer Traditional incorporated in the electronic board
Sensors Water fill gauge (flowmeter)
Aqua control

SOI/DT 2007-11 dmm 7/69 599 70 39-88
3.1.2 General characteristics WD
Version
SERIES 6
Version
SERIES 6 Special
Number of buttons Max. 7 (6 options + start/pause)
Number of LEDs Max. 14 + LCD
Programme selector 25 positions with main switch (incorporated in the PCB )
Serial port DAAS-EAP communications protocol up to 115.200 baud
Power supply 220/240V
50/60 Hz (configurable)
Type of washing Traditional with “eco-ball” sphere
Jet-system
Rinsing system Traditional with “eco-ball” sphere
Jet-system
Motor Collector, with tachometric generator Two-pole asynchronous, with three-phase tachometric generator
(with Inverter)
Spin speed 1000 ÷1600 rpm
Anti-unbalancing system FUCS
Water fill 1 solenoid valve with 1 inlet – 2/3 outlets
Detergent drawer 3 compartments: prewash/stains, wash, conditioners
Control of water level in the
tub Electronic/analogue pressure switch
Door safety device Traditional (with PTC)
Instantaneous
Power of heating element
washing 1950W with thermal fuses incorporated
Power of heating element
drying 1840W (920+920)
Washing temperature control NTC sensor incorporated in the heater
Drying temperature control NTC sensor
Thermostats
Buzzer Traditional incorporated in the electronic board
Sensors Water fill gauge (flowmeter)
Aqua control

SOI/DT 2007-11 dmm 8/69 599 70 39-88
3.2 CONTROL PANEL
3.2.1 Styling SERIES 6
•max. 7 buttons
•21-position programme selector
•LEDs 14 for WM and LEDs 16 for WD
•LCD
Version WM
SERIES
6 Special
SERIES
6
The two versions differ for the background colour of the LCD: one black, the other white.
Version WD
SERIES
6 Special
SERIES
6
The two versions differ for the background colour of the LCD: one black, the other white.
•Dispositions of LEDs and buttons
VERSION WM VERSION WD

SOI/DT 2007-11 dmm 9/69 599 70 39-88
3.2.2 Configuration of control panel
VERSION WM VERSION WD
The washing programmes, the functions of the selector knob and the various pushbuttons vary
according to the model, since these are determined by the configuration of the appliance.
3.2.3 Programme selector (S1)
The selector features 25 positions and incorporates the ON/OFF
switch. The various positions of the selector may be configured to
perform different washing programmes (ex: water level, drum
movement, no. of rinses and the washing temperature to be selected
according to the type of clothes). It can be turned both clockwise and
anti-clockwise.
In the first position, the appliance is switched off and the current
programme is cancelled.
For each programme, the compatible options and other parameters are
defined.
3.2.4 Programme configuration
The table below lists the parameters that can be used to define the washing programmes.
Types of fabric Cotton/linen, Synthetic fabrics, Delicates, Wool, Hand-wash,
Shoes, Jeans, Duvet, Silk.
Special programmes Soak, Miniprogramme, Easy-Iron, Conditioner, Rinses, Delicate
rinses, Drain, Delicate spin, Spin, Drying.
Temperature Determined by the chosen programme.
Spin It can be selected with the “Spin” button.
Options (Normal / Possible) Rinse Hold, Night-time cycle, Pre-wash, Stains, Sensitive, Extra rinse, Easy-Iron, Economy (energy label), Intensive, Normal,
Daily, Short, Very short, Reduced spin speed, No spin.
Programme phases Pre-wash, Wash, Rinses, Spin, Delayed start, Drying.

SOI/DT 2007-11 dmm 10/69 599 70 39-88
3.2.5 Pushbuttons – LEDs and LCD
The functions of each button are defined by the configuration of the appliance.
•Button no. 1: this button is related to LEDs (L1÷L5) and pressing it
sequentially the spin speed varies from max., to no spin or rinse hold.
WM WD
•Button no. 2: this button is configurable:
in WM versions is related to LED (L10),
while
in WD versions is related to LEDs L6-L8-L10.
•Button no. 3: this button is configurable and is related to LED (L11).
•Button no. 4: this button is configurable and is related to LED (L14).
•Button no. 5: this button is configurable and is related to LED (L15).
•Button no. 6: this button is configurable and has the function of
START/PAUSE and is related to LEDs 20-21.
Two LEDs, one yellow that flashes in case of alarm and one red:
>that flashes when the appliance is in pause, in selection, or in
combination with the yellow one to indicate the alarm code.
>remains lit during the cycle execution.

SOI/DT 2007-11 dmm 11/69 599 70 39-88
•Button no. 7: this button is configurable, has the function of
DELAYED START. During the cycle selection phase, it is possible
to select a delayed start from 30’ to 20 hours (30’ "60’ "90’ "
2h "3h… "20h "0h) and the time displayed in the LCD, during
the last hour, the time decreases minute by minute.
•LED wash phase indicators:
The LEDs L16, L17, L18 are configurable and are used as indicators of the wash phases.
Indications
Pre-wash Lights during selection mode if the programme includes the pre-wash phase,
and during the execution of the pre-wash
Wash Lights during selection mode if the programme includes the wash phase, and
during the execution of the wash
Pre-wash/Wash Lights during selection mode if the programme includes the pre-wash or wash
phases, and during the execution of these phases
Rinses Lights during selection mode if the programme includes rinse phases, and
during the execution of the rinses
Spin Lights during selection mode if the programme includes the spin phase, and
during the execution of the spin
Rinses / Spin Lights during selection mode if the programme includes rinses and spin and
during the execution of these phases
Drain Lights during selection mode if the programme includes the drain phase, and
during the execution of the drain
Extra rinse Lights when this option has been memorized (if included in the cycle)
Rinse-hold Lights if the programme includes the rinse-hold option and at the end of the
cycle, when the appliance stops with water in the tub
Current cycle Lights during selection mode
Lights during execution of the cycle and switches off during the drain phase if
selected
End of cycle Lights when the programme has been completed
Door locked
Lights when the door lock prevents opening of the door, and switches off when
the door can be opened. Flashes when the interlock is about to release the
door (may be seen if PTC devices are used, as these require one or two
minutes before releasing the lock)
Child lock Lights when the child safety is on and all buttons are deactivated
Drying Lights during selection mode if the programme includes the drain phase and
during the execution of this phase
•LCD
The following information appear on the LCD:
ªThe duration of the washing programme, which appears after
having selected it. This time corresponds to that necessary for the
maximum wash load for each programme type. After starting the
programme the time decreases minute by minute.
ªThe end of the programme is indicated by three zero flashing (when
it is possible to open the door).
ªThe stop of the appliance with water in tub, after the programmes
with RINSE HOLD option, is displayed by one zero flashing. The LED
that indicates the door remains lit and the LED of the START/PAUSE
button switches off.
ªThe anti-crease phase at the end of the drying cycle is displayed by
one zero flashing.

SOI/DT 2007-11 dmm 12/69 599 70 39-88
ª- The delayed start, selected through the relative button. After
pressing the START/PAUSE button the countdown starts and the delay
time decreases hour by hour. In the last 2 hours it diminishes by 30
min. and in the last hour minute by minute.
ª- The padlock: when is on, it indicates that all the buttons are
disabled to prevent the children from modifying, starting or pausing
the cycle.
To disable this function it is necessary to push a key combination.
(See User Manual).
ª- Wrong choice of an option is displayed by Err, when a function not
compatible with the chosen programme is selected.
The wrong selection is also signalled by an acoustic alarm (if activated).
ª- An alarm code indicates an error of the appliance operation.
Simultaneously to the displaying of the code, in the display the yellow
LED above the START/PAUSE button flashes.
•Buzzer (configurable)
→A “beep” when the programmes are selected, an option, when the START/PAUSE button is pressed to start
or pause the cycle.
→Three “beeps” when an option not compatible with the selected programme is chosen, or when a button is
pressed or the knob turned during a cycle.
→A particular sequence of “beeps” for a two-minute duration when the cycle has terminated.
→A particular sequence of three “beeps”, to signal a malfunctioning of the appliance.

SOI/DT 2007-11 dmm 13/69 599 70 39-88
4 SERIES 7
4.1 GENERAL CHARACTERISTICS
The ENV060 electronic control system consists of a
single PCB, which incorporates the power, control
and display (where the LCD display is connected)
functions and the programme selector is
incorporated in the board.
The PCB is mounted on a casing fitted to the control
panel.
4.1.1 General Characteristics WM
Version
SERIES 7
Version
SERIES 7 Special
Number of buttons Max. 7 (6 options + 1 start/pause)
Number of LEDs Max. 12 + LCD display
Programme selector 21 positions with main switch (incorporated in the PCB )
Serial port DAAS-EAP communications protocol up to 115.200 baud
Power supply 220/240V
50/60 Hz (configurable)
Type of washing Traditional with “eco-ball” sphere
Jet-system
Rinsing system Traditional with “eco-ball” sphere
Jet-system
Motor Collector, with tachometric generator Two-pole asynchronous, with three-phase tachometric generator (with
Inverter)
Spin speed 1200 ÷1600 g/’
Anti-unbalancing system FUCS
Water fill 1 solenoid valve with 1 inlet – 2/3 outlets
Detergent drawer 3/4 compartments: prewash, wash, conditioners, (bleach)
Control of water level in the
tub Electronic/analogue pressure switch
Door safety device Traditional (with PTC)
Instantaneous
Power of heating element 1950W with thermal fuse incorporated
Temperature control NTC sensor incorporated in the heater
Buzzer Traditional incorporated in the electronic board
Sensors Water fill gauge (flowmeter)
Aqua control

SOI/DT 2007-11 dmm 14/69 599 70 39-88
4.1.2 General Characteristics WD
Version
SERIES 7
Number of buttons Max. 7 (6 options + 1 start/pause)
Number of LEDs Max. 1 + LCD display
Programme selector 25 positions with main switch (incorporated in the PCB )
Serial port DAAS-EAP communications protocol up to 115.200 baud
Power supply 220/240V
50/60 Hz (configurable)
Type of washing Traditional with “eco-ball” sphere
Jet-system
Rinsing system Traditional with “eco-ball” sphere
Jet-system
Motor Two-pole asynchronous, with three-phase tachometric generator (with
Inverter)
Spin speed 1200 ÷1600 rpm
Anti-unbalancing system FUCS
Water fill 1 solenoid valve with 1 inlet – 2/3 outlets
Detergent drawer 3/4 compartments: prewash, wash, conditioners, (bleach)
Control of water level in the
tub Electronic/analogue pressure switch
Door safety device Traditional (with PTC)
Instantaneous
Power of heating element
washing 1950W with thermal fuse incorporated
Power of heating element
drying 1840W (920+920)
Temperature control washing NTC sensor incorporated in the heater
Temperature control drying NTC sensor
Thermostats
Buzzer Traditional incorporated in the electronic board
Sensors Water fill gauge (flowmeter)
Aqua control

SOI/DT 2007-11 dmm 15/69 599 70 39-88
4.2 CONTROL PANEL
4.2.1 Styling SERIES 7
•max. 7 buttons
•25-position programme selector
•14 LEDs
•LCD display
Version WM
SERIES 7
Special
SERIES 7
The two versions differ for the size of the LCD: in the Low version, the displaying of the choice of the options is
performed through the lighting of the LEDs.
Version WD
SERIES 7
•Disposition of the LEDs and of the buttons in the display board
Version Series 7 Special WM Version Series 7 WM/WD

SOI/DT 2007-11 dmm 16/69 599 70 39-88
4.2.2 Configuration of control panel
WM
SERIES 7
Special
WM WD
SERIES 7
The washing programmes, the functions of the selector knob and the various pushbuttons vary
according to the model, since these are determined by the configuration of the appliance.
4.2.3 Programme selector (S1)
The selector features 25 positions and incorporates the ON/OFF switch.
The various positions of the selector may be configured to perform
different washing programmes (ex: water level, drum movement, no. of
rinses and the washing temperature to be selected according to the type
of clothes) and can be turned both clockwise and anti-clockwise.
In the first position, the appliance is switched off and the current
programme is cancelled.
For each programme, the compatible options and other parameters are defined.
•Programme configuration
The table below lists the parameters that can be used to define the washing programmes.
Types of fabric Cotton/linen, Synthetic fabrics, Delicates, Wool, Hand-wash, Shoes,
Jeans, Duvet, Silk.
Special programmes Soak, Miniprogramme, Easy-Iron, Conditioner, Rinses, Delicate
rinses, Drain, Delicate spin, Spin.
Temperature Normal, Maximum: the initial temperature is the maximum that can be
selected for a specific washing programme.
Spin Normal, Minimum, Maximum.
Options (Normal /
Possible)
Rinse Hold, Night-time cycle, Pre-wash, Stains, Sensitive, Extra
rinse, Easy-Iron, Economy (energy label), Intensive, Normal, Daily,
Short, Very short, Reduced spin speed, No spin.
Programme phases Pre-wash, Wash, Rinses, Spin, Delayed start, Drying.

SOI/DT 2007-11 dmm 17/69 599 70 39-88
4.2.4 Pushbuttons and LCD SERIES 7 Special
The functions of each button are defined by the configuration of the appliance.
•Button no. 1: this button is related to LEDs (L1÷L5) and pressing it
sequentially the spin speed varies from max., to no spin or rinse hold.
•Button no. 2: this button is configurable and is related to LED (L10).
•Button no. 3: this button is configurable and is related to LED (L11).
•Button no. 4: this button is configurable and is related to LE (L14).
•Button no. 5: this button is configurable and is related to LE (L15).
•Button no. 6: this button is configurable and has the function of
START/PAUSE and is related to LEDs 20-21.
Two LEDs, one yellow that flashes in case of alarm and one red:
>that flashes when the appliance is in pause, in selection, or in
combination with the yellow one to indicate the alarm code.
>remains lit during the cycle execution.

SOI/DT 2007-11 dmm 18/69 599 70 39-88
Button no. 7: this button is configurable, has the function of
DELAYED START. During the cycle selection phase, it is possible to
select a delayed start from 30’ to 20 hours (30’ "60’ "90’ "2h
"3h… "20h "0h) and the time displayed in the LCD, during the last
hour, the time decreases minute by minute.
•Indicator LEDs:
The LEDs L16, L17 can be configured.
•LCD
The following information appear on the LCD:
ªThe duration of the washing programme, which appears after
having selected it. This time corresponds to that necessary for the
maximum wash load for each programme type. After starting the
programme the time decreases (and updates) minute by minute.
ªWashing phases
-Pre-wash
-Washing
-Drain
-Spin
ª- The end of the programme is indicated by one zero flashing.
ª- The stop of the appliance with water in tub, after the programmes
with RINSE HOLD option, is displayed by one zero flashing. The key
indicates that the door is locked and the LED of the START/PAUSE
button switches off.
ªThe padlock: when is on, it indicates that all the buttons are disabled
to prevent the children from modifying, starting or pausing the cycle.
To disable this function it is necessary to push a key combination.
(See User Manual).

SOI/DT 2007-11 dmm 19/69 599 70 39-88
ªWrong choice of an option is displayed by Err, when a function not
compatible with the chosen programme is selected.
The wrong selection is also signalled by an acoustic alarm (if activated).
ªAn alarm code indicates an error of the appliance operation.
Simultaneously to the displaying of the code, the START/PAUSE
flashes.
•Buzzer
See page12.

SOI/DT 2007-11 dmm 20/69 599 70 39-88
Pushbuttons and LCD Version WM Series 7
The functions of each button are defined by the configuration of the appliance.
•Button no. 1: TEMPERATURE
The programme shows the base temperature, but pushing
the button it is possible to modify it from a max. to a min.
(allowed by the programme) and it is represented by the
number of bars displayed and by the 2 digits.
The star symbol appears when the cold cycle is selected.
•Button no. 2: SPIN
The programme shows the maximum spin, but pushing the
button, it is possible to vary the speed up to 400 rpm
(represented by the number of bars displayed and by the 4
digits).
When the NIGHT CYCLE or RINSE HOLD is selected, the
relative symbols light up (no value relative to the bars or
the digits appears). At the end of the cycle the RINSE
HOLD button flashes.
•Button no. 3: OPTIONS
Configurable button: the available options for this button
are:
−Pre-wash (it can be configured also as programme)
−Stains
−Sensitive
−Extra-rinse
•Button no. 4: OK
−Configurable button: it confirms the chosen options.
•Button no. 5: TIME SAVE
−Configurable button, the “TIME SAVE” function
reduces the washing time.
•Button no. 6: START/PAUSE
This button is configurable and it is combined to LEDs 20-21.
Two LEDs, one yellow that flashes in case of alarm and one red:
>that flashes when the appliance is in pause, or in combination with the
yellow one to indicate the alarm code.
>remains lit during the cycle execution.