Incy Interiors Sybilla Single 7486 User manual

Made in Malaysia for:
Incy Interiors Pty Ltd
87-103 Epsom Road
Rosebery NSW 2018
AUSTRALIA
0428 830 630
www.incyinteriors.com.au
Designed and Distributed in Australia by:
Incy Interiors Pty Ltd
87-103 Epsom Road
Rosebery NSW 2018
AUSTRALIA
0428 830 630
www.incyinteriors.com.au
Australia Item #: 7486
1
Sybilla Single

2
Please keep these instrucons for future reference
Health & Safety:
1.Do not jump on this Sybilla Single.
2. Do not use this Sybilla Single if any part is missing, damaged or worn.
3. Always use on a level and even surface.
Warning: If this Sybilla Single is on a laminated floor
we recommend you place some protecon to avoid
scratching the floor
Care & Maintenance
1. It is recommended that 2 people assist whenever you need to change the locaon of the Sybilla Single.
2. Keep any sharp object away from the chair
After Sales Customer Service
When you receive your Incy Interiors product, if you need any assistance or if you have any
comments with respect to any aspect of the goods, please contact your local distributor via email.
If you are missing parts you can order parts by emailing us at [email protected]
or call
0428 830 630. Please include the product name, colour, and a brief description of the part you are
missing.
You can also visit our website at www.incyinteriors.com.au for latest product information.
Incy Interiors Pty Ltd
87-103 Epsom Road
Rosebery NSW 2018
AUSTRALIA
0428 830 630
www.incyinteriors.com.au

5
4
3
A
A
Item Qty
A
A
Headboard
Wings
Footboard
Headboard 1
2
1
Hardware Qty
30
Part Lists
Side Caps
Side Rails
Slats
1
2
15
M5 Allen Key
A
A
1
3
2
B
A

4
A
A
4
3
4
3
4
1
4
Assembly Instructions
NOTE: It may be easier to assemble product with two people.
1. Place Metal Bracket on Side Rails (4) over pre-inserted bolts in Headboard (1) and Footboard (3)
and hand-tighten to loosely secure parts together and fully tighten bolts with M5 Allen Key (B).
Bracket
Side Rail
3
4
A
A
Bracket
Side Rail
4
Diagram 1
Diagram 1Diagram 2
1
4
3
4
1
B.
M5 Allen Key
2. With the curved side facing upwards, insert end of Slats (5) into a Side Cap (A). Use your palms to
push down the Side Caps (A) into the Side Rails (4), as shown in diagram below.
5
A
A
A.
5.
Slats (15 pcs) Side Caps (30pcs)
A
5
x15

A
A
2
2
A
A
1
5
3. Slot in the Headboard Wing (2) to Headboard (1) as per shown in Diagram 3 and Diagram 4.
Diagram 1
Diagram 3
1
A
2
1
2
Diagram 1Diagram 4
Headboard
Headboard
Wing