Indesit PBAA 34 NF X D User manual

GB
REFRIGERATOR/FREEZER COMBINATION
Contents
Installation, 2-3
Positioning and connection
Reversible doors
Description of the appliance, 4-5
Control panel
Overall view
Start-up and use, 6-7-8
Starting the appliance
Chiller system
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 9
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Replacing the light bulb
Precautions and tips, 0
General safety
isposal
Respecting and conserving the environment
Troubleshooting,
Assistance, 2
Operating Instructions
PBAA 34 NF D (UK)
English, 1
GB

2
GB
Installation
! Before placing your new appliance into operation
please read these operating instructions carefully. They
contain important information for safe use, for installation
and for care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. o not obstruct the rear fan grills. The compressor
and condenser give off heat and require good
ventilation to operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part
of the appliance and any furniture above it, and at
least 5 cm between the sides and any furniture/side
walls.
4. Ensure the appliance is away from any sources of
heat (direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers
supplied in the installation kit, following the
instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the
refrigerator by tightening or loosening the rear feet.
Electrical connections
After the appliance has been transported, carefully
place it vertically and wait at least 3 hours before
connecting it to the electricity mains. Before inserting the
plug into the electrical socket ensure the following:
 The appliance is earthed and the plug is compliant
with the law.
 The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located
on the bottom left side of the fridge (e.g. 150 W).
 The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
 The socket is compatible with the plug of the
appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (see Assistance).
o not use extension cords or multiple sockets.
! Once the appliance has been installed, the power
supply cable and the electrical socket must be easily
accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
!The manufacturer declines any liability should these
safety measures not be observed.
WARN NG:
TH S APPL ANCE MUST BE EARTHED.
Replacing fuse covers:
When replacing a faulty fuse, a 13amp ASTA approved
fuse to BS 1362 should always be used and the fuse
cover re-fitted.
If the fuse cover is lost, the plug must not be used until a
replacement is obtained.
Replacement fuse covers:
If a replacement fuse cover is fitted, it must be of the
correct colour as indicated by the coloured marking or the
colour that is embossed in words on the base of the plug.
Removing the plug
If your appliance has a non-rewireable moulded plug
and you should wish to remove it to add a longer cable
or to re-route the mains cable through partitions, units
etc. please ensure that either:
- The plug is replaced by a fused 13amp re-
wireable plug bearing the BSI mark of
approval.
or
- The mains cable is wired directly into a
13amp cable outlet, controlled by a
switch (in compliance with BS 5733)
which is accessible without moving the
appliance.
Disposing of the plug
Cut off and dispose of the supplied plug if it does not fit
your socket. The cable should be cut as close as
possible to the moulded plug.
Remove the fuse.
WARNING:
To avoid a shock hazard do not insert the discarded
plug into a socket anywhere else.

GB
3
Fitting a new plug
MPORTANT:
WIRES IN THE MAINS LEA ARE COLOURE IN
ACCOR ANCE WITH THE FOLLOWING CO E...
Green and Yellow - Earth
Blue - Neutral
Brown - Live
As the colours of the wires in the mains lead may not
correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
- Connect Green and Yellow wire to terminal marked
'E' or or coloured Green and Yellow.
- Connect Brown wire to terminal marked 'L' or
coloured red or brown.
- Connect Blue wire to terminal marked 'N' or
coloured Black or Blue.
If a 13amp plug (BS 1363) is used it must be
fitted with a 13amp fuse. A 15amp plug must be
protected by a 15amp fuse, either in the plug or adaptor
or at the distribution board.
f you are in any doubt about the electrical
supply to your machine, consult a qualified
electrician before use.
CE Marking certifies that this appliance conforms to
the following EEC directives:
Low Voltage Equipment - 73/23/EEC & 93/68 EEC
Electromagnetic Compatibility 89/336/EEC, 92/31/EEC
& 93/68/EEC
Reversible doors
If it is necessary to change the direction in which the
doors open, please contact the Technical Assistance
Centre.

4
GB
Description of the
appliance
Control panel
ON/OFF
The entire product (both the refrigerator and freezer
compartments) may be switched on by pressing this button.
The red LED indicates that the product is switched off, while
the green LED shows that it is operating.
REFRIGERATOR - and + temperature adjustment
Used to modify the temperature setting of the refrigerator
confirmation corresponding to the selected temperature
appears on the display.
REFRIGERATOR display
Shows the set temperature for the refrigerator compartment.
ECO
Controls the activation and deactivation of the ECO function
(optimal operating temperature for minimal energy
consumption). When this function is activated, the ECO LED
on the keypad lights up. Ten minutes after the most recent
user interaction, the display enters its energy saving mode
(all LEDs switch off, except the ON/OFF and SMART indicator
lights). To exit the energy saving mode, simply press any
button or open the refrigerator door.
FREE ER TEMPERATURE ALARM
The temperature of the freezer has exceeded the safety
threshold for optimal food storage (see Troubleshooting section)
DOOR OPEN ALARM
The refrigerator door has been open for more than two
minutes (see Troubleshooting section)
SMART LED (intelligent operation)
The SMART LED indicates that the product is controlling the
internal temperature so as to optimise it.
CHILD LOCK
Activates or deactivates the control panel button lock in order to
avoid the risk of the various functions being activated accidentally
by children. The CHILD LOCK LED on the keypad lights up.
FREE ER - and + temperature adjustment
Used to modify the temperature setting of the freezer
confirmation corresponding to the selected temperature
appears on the display.
FREE ER display
Shows the set temperature for the freezer compartment.
SUPER COOL
Activates or deactivates the SUPER COOL function (rapid
cooling). The SUPER COOL LED on the keypad lights up and
SC appears on the refrigerator display.
SUPER FREE E
Activates or deactivates the SUPER FREEZE function (rapid
freezing). The SUPER FREEZE LED on the keypad lights up
and SF appears on the freezer display.
HOLIDAY
Activates or deactivates the HOLIDAY function (the HOLIDAY
LED on the keypad lights up), while the temperature values
+12°C and -18°C appear on the refrigerator and freezer displays
respectively. Ten minutes after the most recent user interaction,
the display enters its energy saving mode (see ECO function).
ICE PARTY
Activates the ICE PARTY function (the temperature is
decreased for the amount of time it takes to cool a bottle).
The ICE PARTY LED on the keypad lights up.
ON/OFF
isplay
REFR GERATOR
SUPER COOL
CH LD LOCK
FREEZER Temperature
Adjustment
SUPER FREEZE
CE PARTY
REFR GERATOR Temperature
Adjustment
DOOR OPEN
ALARM
HOL DAY
isplay
FREEZER
ECO
FREE ER TEMPERATURE ALARM
SMART LED
(intelligent operation)

GB
5
Description of the
appliance
Overall view
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly
represent the appliance purchased. For more complex features, consult the following pages.
 Varies by number and/or position.
* Available only on certain models.
Levelling FEET
Removable lidded
shelf with EGG TRAY
Removable
multipurpose
SHELVES
BOTTLE shelf
SHELVES
FLEX COOL BOX for MEAT
and CHEESE*
ce3 ice tray•
FREEZER and
STORAGE
compartment
STORAGE
compartment
LAMP
(see Maintenance)
FRUIT and
VEGETABLE bin
Removable
multipurpose
SHELVES
W NE RACK*
Removable
multipurpose
SHELVES