Inepro PayMatic AD 2400 User manual

© 2016 Inepro B.V. All rights reserved
Technical Manual | PayMatic - AD 2400 (-B)
PayMatic - AD 2400
(-B)
Product Version: V.23
Version of this manual: 3.2.1

PayMatic - AD 2400 (-B)
Congratulations on your selection of the PayMatic. We are certain you will be pleased with
your purchase of one of the finest payment solutions of the market.
We want to help you to get the best result from your PayMatic and show you how to
operate it. This manual contains information on how to do that; please read it carefully.
Due to continuous product improvements this manual is subject to changes without
notice.
Your Inepro business partner is dedicated to your satisfaction and will be pleased to
answer your questions and your concerns.
Best wishes,
Inepro BV.
The most versatile payment solution

All rights reserved. No parts of this work may be reproduced in any form or by any means -
graphic, electronic, or mechanical, including photocopying, recording, taping, or information
storage and retrieval systems - without the written permission of the publisher.
Products that are referred to in this document may be either trademarks and/or registered
trademarks of the respective owners. The publisher and the author make no claim to these
trademarks.
While every precaution has been taken in the preparation of this document, the publisher and
the author assume no responsibility for errors or omissions, or for damages resulting from the
use of information contained in this document or from the use of programs and source code that
may accompany it. In no event shall the publisher and the author be liable for any loss of profit
or any other commercial damage caused or alleged to have been caused directly or indirectly by
this document.
Version 3.2.1 created: July 2016 in Nieuw-Vennep.
Publisher
Managing Editor
Technical Editors
Cover Design
Inepro B.V.
K. de Graaf
P. Grimmerink
K. de Graaf
Production
Inepro B.V.
Team Coordinator
R. Groen
H. Wagenaar
PayMatic - AD 2400 (-B)
J. van den Berg
PayMatic - AD 2400 (-B)
P. Blom

http://www.inepro.com
Table of Contents
Introduction 2
Functionality 4
.................................................................................................... 4Versions
.................................................................................................... 4Standard functioning (without Ecos modules):
.................................................................................................... 5Extra functioning (with all Ecos modules):
Programming Functions 8
Function Overview 10
Specifications 20
Connection 22
.................................................................................................... 22Open / disassemble the PayMatic
.................................................................................................... 25Connection sheet for solenoid valve.
.................................................................................................... 27Connection sheet for a 4 pole 20 A contactor
Appendix 30
.................................................................................................... 30Wiring diagram
.................................................................................................... 34Troubleshooting
.................................................................................................... 35Flowchart
Notes 38

ATTENTION!!
Read this manual carefully before installing the PayMatic - AD 2400 (-B)!
Mains connection
Guarentee
Security
Before connecting the appliance to the mains, check that the mains supply voltage corresponds
to the voltage printed on the type plate of the adapter. If the mains voltage is different, consult
your supplier.
No guarantee can be given if safety regulations are not followed.
Always disconnect the power supply before handling anything inside the device.
This device is in conformity with the EMC directive and low-voltage directive.
CE Conformité Europeène (Conform European Norm)
WEEE Directive (Waste of Electrical and Electronic Equipment)
Inepro considers it important to properly take the climate into account. We therefore produce as
many climate-friendly products. Your new device contains materials which can be recycled and
then reused. At the end of life, specialized companies can dismantle the device, to materials which
can be reused in order to recycle and reuse. For example, the materials that must be discarded will
be limited to a minimum. Please take into account the rules and regulations in your area regarding
the rules about disposal of packaging materials, exhausted bateries and old equipment.
Thank you, Inepro BV
This device may only be used indoors.
Indoor User Only
Directives
Due to continuous product improvements this manual is subject to change without notice. This
document describes the technical and functional operation of the PayMatic - AD 2400 (-B). Greatest
care has been taken drafting the information in this manual and it may be said that it is reliable.
However, the producer is not liable for any shortcomings in the text or incompleteness of the
information. Thank you for your decision to use the PayMatic - AD 2400 (-B).
This document:

I
Introduction
Part

2 - PayMatic - AD 2400 (-B)
Introduction
This document:
This document describes the technical and functional operation of
the 240V mains voltage and 24V low voltage PayMatic® versions.
Greatest care has been taken drafting the information in this
manual and it may be said that it is reliable. However, the producer
is not liable for any shortcomings in the text or incompleteness of
the information.
Thank you for your decision to use the PayMatic®.
Introduction
The PayMatic® standard control board design includes a minimum
of functionality. The functionality of the PayMatic® can be
expanded by means of additional “ECOS”® software modules.
Thus, it is possible to produce perfectly customised PayMatics®.
PayMatic® outputs have two neutral relay points to control a
connected device over a certain programmable length of time. This
PayMatic® is programmed in a user-optimised way by means of
two control keys. With its potted electronics and its extensibility by
means of “ECOS”® software modules the PayMatic® is a very
special timer of its kind.
“ECOS”® : Electronic Customised Option System