infinias S-SVR128-IMS-A User manual

www.infinias.com IN_S-SVR128_H3_SQ
1/20/2014
S-SVR128-IMS-A Server Quick Start Guide
IP Access Control Management Systems
This guide provides setup instructions for your innias server.
Save this document for future reference.
For more information, contact innias support at:
866-496-5783Toll Free • support@innias.com

1. Getting Started
Unpacking the contents
The following are included with your system. Please
inspect these and the other system components while
unpacking.
• Quick Start Guide
• Server and documentation
• Server Activation License card(s)
(for use when starting your server)
• Intelli-M® Access DVD
• Example access cards
• Hex security Allen wrench
• Microsoft® Windows® 7 Professional DVD
Choose a proper location
Select a location for the server that meets the following
requirements.
Notice: Excessive heat can shorten the life of electronics.
• Adequate ventilation to avoid excessive heat (climate-
controlled environment)
• Uninterrupted Power Supply (UPS)
• Moisture-free environment
• A place away from direct sunlight
• An area with minimal dust or debris
2. About the Server
Front panel
1. Power on indicator/power button
2. Video connector
3. HDD activity indicator
4. Diagnostic indicator lights
5. System Status Indicator
6. System identication button
7. USB connectors (2)
8. System identication panel
9. Optical drive
Back panel
1. PCIe expansion card slot
2. Serial connector
3. Video connector
4. eSATA connector
5. USB connectors (2)
6. Ethernet connectors (2)
7. System status indicator
8. System identication button
9. Power cable connector
10. Retention clip
www.infinias.com

www.infinias.com
3. Setting Up Your Server
1. Mount the server in an equipment rack. 2. Connect your monitor (D-sub connector), keyboard and
mouse (USB ports), and LAN cable(s).
Monitor port
USB ports
LAN ports
3. Plug the power cable into the power connector, then
secure the power cable to the chassis with the retention
clip. Plug the other end of the cable into a power source.
4. Power on the server and monitor.
5. Attach and lock the bezel for security. 6. Setup the server.
Login to the system using the following credentials. Please
change your password to improve the security of your
system.
Windows 7 Professional login:
Login username: inniasAdmin
Login password: 1nf!nIas

SERVICE AND SUPPORT INFORMATION
3 YEAR WARRANTY
The server hardware comes with a 3 year return to innias warranty. For support, please contact innias in the USA at 866-496-5783.
CUSTOMER SUPPORT
For all software and operating system questions, contact innias support at 866.496.5783. For questions about installation please
contact your dealer/systems integrator.
AUTOMATIC BENEFITS
The server system will back up the Intelli-M Access databases nightly to drive D:\. Files on this drive should be copied to another
computer or to removable storage on a regular basis.
SERVER SYSTEM FEATURES
• Intel® Xeon® processor (3.1 GHz)
• 4GB memory
• 500GB hard drive
• 16GB USB ash drive for non-volatile storage
• Dual LAN: 10/100/1000BASE-T ports for segregating security trac from corporate network
• 1U rack mount form factor
• Microsoft Windows Server 2008 R2
• Intelli-M Access installed and licensed
• Database and key les automatically backed up
ADDITIONAL SYSTEM INFORMATION
• LOGGING IN - Connecting to Intelli-M Access:
From this computer: http://localhost/intellim
From another computer: http://<ipaddress>/intellim
http://<machinename>/intellim
where <ipaddress> and <machinename>
are the IP address and name of this server
• Intelli-M Access:
Username: admin
Password: admin
• Database management:
System administrator username: sa
System administrator password: 1nf!nIas Server Activation License card
(used during initial system startup)
Copyright ©2014 Innias, Inc. • Indianapolis, IN
866-496-5783Toll Free • support@innias.com • www.innias.com