Infinite L-com HGX-PRM-ARM User manual

USA & Canada [phone] | International [phone] | L-com.com
1HGX-PRM-ARM REV 1.1 | © 2020 Innite Electronics, Inc. L-com is a registered trademark of Innite Electronics, Inc.
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
Click the following link (or enter part number in “SEARCH” on website) to obtain additional part information including price, inventory and certications:
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
Features
• Easy assembly instructions
• 5 ft tall center mast
• Secondary arm of 2.75 ft
• Powder coated galvanized steel
• Operating windspeeds up to 50 KM/h (31 mph)
• Survival windspeeds up to 100 KM/h (62 mph)
• All assembly hardware included
• Optional mat for max surface tension/protection
• Standard 16” x 8” cinder blocks (Not included)
• 150-degree max angle for roof pitch
Applications
• De-centralized wireless networks (FreedomFi, Helium, POLLEN,
XNET, MetaBlox, etc.)
• Wireless or satellite antenna
• Scientic and weather instrumentations
• Security camera and instruments
• Solar panel
Description
The L-com’s HGX-PRM-ARM is a non-penetrating antenna peak roof mount pole which has strong and rugged design for antenna
installations. The non-anchoring roof mount 34-inch pole is made of galvanized steel and powder coated to withstand harsh weather
and corrosion. Our peak roof mount is designed for telecom installers, DIY installers, and satellite dish installers.
The communication antenna mount operates at windspeeds up to 50 Km/h or 31 MPH and survives at windspeeds up to 100 Km/h or
62 MPH. This non-anchoring roof mount pole comes in 2.36-inch length, 2.36-inch width and 33.46-inch height. The peak roof mount is
suitable for wireless internet providers, crypto enterprises, and commercial building owners.
This non-penetrating antenna peak roof mount pole doesn’t need screws or anchors, which minimizes damage to the roofs. The non-
penetrating antenna peak roof mount o󰀨ers maximum surface tension and protection. The non-penetrating antenna mount is used for
peak roofs and is available with easy assembly instructions.
The L-com has the largest in-stock selection of non-penetrating antenna peak roof mount pole with same-day shipping for domestic and
international orders. Our portfolio includes coaxial cable assemblies, connectors, adapters, NEMA rated enclosures, and an RF product
line which includes antennas, ampliers, passive, and active components. For further information on similar products, our expert techni-
cal support and knowledgeable sales team can help you get the non-penetrating antenna peak roof mount 33-inch pole as per your
requirement.
Note: Ballast data should be determined by a local professional engineer. Adequate ballast material must be determined and provided
by others.
HGX-PRM-ARM

USA & Canada [phone] | International [phone] | L-com.com
2HGX-PRM-ARM REV 1.1 | © 2020 Innite Electronics, Inc. L-com is a registered trademark of Innite Electronics, Inc.
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
HGX-PRM-ARM
Note:
•Ballast data should be determined by a local professional engineer. Adequate ballastmaterial
must be determined and provided by others
•Prior to installation, verify that the installation, roof material and supporting structures have
been investigated and found capable to withstand load
•Place ballast material (i.e., cinder blocks, concrete blocks, etc.) evenly on both side with at least
4 on each side, total 8 blocks per mount approx. 300lbs over all base angles (Estimated
Operational Ballast)
•All antenna installations MUST begrounded
•L-Com RECOMMENDS THAT BALLAST MATERIAL ALWAYS BE PLACED PRIOR TO MOUNTING
ANTENNAS AND THAT THE MOUNT BE SECUREDTO PREVENT HAZARDS FROM OCCURRING
UNDER EXTREME WIND LOADING CONDITION
•Inspect all bolts and screws for optimal tightness (recommended torque 13-14 lbs-ft.) to ensure
there is noloose gaps after installation
•Recommended to use self -tapping screws provided with mount toreduce the loading of the
roof if working environment is allowed to drill
•Inspect the mount, antennas, and tightness ofnuts at six-month maximum intervals
Operational
50 Km/h (31 mph)
Under recommended Load
Survival
100 Km/h (62 mph)
Under recommended Load
CONTACT A LOCAL PROFESSIONAL ENGINEER TO DETERMINE PROPER LOADING vs BALLAST WEIGHTS
Operational: It is workable under 50km/h wind speeds.
Survival: The products may be deformed but will not fly away.
Mechanical Specications
Size

USA & Canada [phone] | International [phone] | L-com.com
3HGX-PRM-ARM REV 1.1 | © 2020 Innite Electronics, Inc. L-com is a registered trademark of Innite Electronics, Inc.
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
HGX-PRM-ARM
Length 2.36 in [59.94 mm]
Width 2.36 in [59.94 mm]
Height 33.46 in [849.88 mm]
.
Weight 7.7 lbs [3.49 kg]
Environmental Specications
Operating Temperature, Min -40 deg C
Operating Temperature, Max 80 deg C
Wind Velocity 31 MPH [49.89KPH]
Plating Powder Coat
Material Galvanized Steel
Package Quantity 1
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only from L-com has same day shipment for domestic and International
orders. Our portfolio includes coaxial cable assemblies, connectors, adapters and custom products as well as lightning and surge
protectors, NEMA rated enclosures, and an RF product line which includes antennas, ampliers, passive, and active components.
The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary
to make modifications to the part and/or the documentation of the part in order to impliment improvements. L-com reserves the right to make such changes
as required. Unless otherwise stated, all specifications are nominal. L-com does not make any representation or warranty regarding the suitability of the part
described herein for any particular purpose, and L-com does not assume liability arising out of the use of any part or document.

USA & Canada [phone] | International [phone] | l-com.com
1.1 REV 1.1 | © 2020 Innite Electronics, Inc. L-com is a registered trademark of Innite Electronics, Inc.
4
Website: www.L-com.com
Phone: [phone] │ 1.978.682.6936
43321
TOLERANCES:
.XXX = ±.005 [0.13]
.XX = ±.02 [0.5]
.X = ±.2 [5]
± 1/32
FRACTIONS
ANGLES ± 1°
CABLE LENGTH TOLERANCES:
≤12 [305] = +1 [25] / -0 >12 [305] ≤ 60 [1524] = +2 [51] / -0 >60 [1524] ≤ 120 [3048] = +4 [102] / -0 >120 [3048] ≤ 300 [7620] = +6 [152] / -0 >300 [7620] = +5% / -0
UNLESS OTHERWISE SPECIFIED
LEADING DIMENSIONS ARE INCHES
DIMENSIONS IN [ ] ARE MILLIMETERS
ALL DIMENSIONS ARE FOR REFERENCE ONLY
AND SUBJECT TO CHANGE WITHOUT NOTICE.
UN-DIMENSIONED/NON-CRITICAL FEATURES
MAY VARY IN SIZE AND LOCATION
COLORS MAY VARY
2X STATIONARY SUPPORT ARM
ADJUSTABLE SUPPORT ARM
16.12
409.5
33.44
849.5
2.20
56
2.36
60
.75
19
SUPPORT ARMS NOT SHOWN
FOR CLARITY
16.50
419
2X
.33 8.5
THRU
1.12
28.5
A
2X
.33 8.5
THRU
DETAIL
A
REVISION
ZONE
REV.
DESCRIPTION
DATE CHANGED BY
APPROVED BY
B
ECO-12662
08/21/2023
AKRESOWSKI
KHIETPAS
ITEM NO.
11
REV
CAGE CODE
SIZE
A
OF
DRAWN BY
HGX-PRM-ARM
B
T-Rev.D3
DESCRIPTION
NON-PENETRATING PEAK ROOF MOUNT SHORT POLE ONLY
HBAKKE
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF INFINITE ELECTRONICS, INC. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF INFINITE ELECTRONICS, INC. IS PROHIBITED. THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED.
SHEET
SCALE
NONE
INTERPRET ALL DIMENSIONS AND
TOLERANCES PER ASME Y14.5
A A B B
C C D D
E E
F F
6 6
5 5
4 4
3 3
2 2
1 1
Non-Penetrating Antenna Peak Roof Mount 34-inch Pole Only
L-com CAD Drawing