Vivo STAND V003M User manual

Triple Monitor Desk Mount
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: STAND V003M
Tools Required:
phillips screwdriver
Package Contents
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
A (x1)
B (x1)
C (x1)
E (x1) (x6) G (x1) H (x1)
I (x5) J (x1)
-M C (x12)
D5
-M A (x12)
M4x12
- M B (x12)
M5x12
- -https://vivo us.com/products/stand v003m
K (x1)
3mm
L (x1)
5mm
M (x1)
6mm
D (x1)

Assembly Steps
Step 1
1a
Stick soft pads (I) to bottom of clamp base (D). Slide cable
management clip (G) and base cover (H) on to bottom of pole (B).
Thread pole (B) onto clamp (D). Tighten grub screws in bottom of
clamp (D) using 3mm allen key (K). Secure clamp (D) to desktop as
shown in diagram.
1b
Remove screw from top of bolt in clamp (D). Stick soft pads (I) to
bottom of grommet base (E). Slide cable management clip (G) and
base cover (H) on to bottom pole (B). Thread bottom pole (B) onto
grommet base (E). Tighten grub screws in bottom of grommet base
(E) using 3mm allen key (K). Slide metal pad (J) over bolt and slide
through grommet hole in bottom of desktop. Thread into bottom of
pole (B).
2
Step 2
Slide arm (A) and bracket (C) over top of pole and tighten using mm
allen key (L).

3
Step 5
Step 6
Adjust tension in monitor bracket with 6mm allen key (M) as shown
in diagram.
Store allen keys (M, L) in cable management clip (G) for future
adjustment.
Step 3
Attach cable management clips (F) as shown in diagram.
Step 4
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting
holes of monitor, making sure to leave 3mm of threads exposed. Align
bolts (M-A or M-B) in VESA plate. Secure using two more bolts (M-A or
M-B) and washers (M-C) in the bottom two holes. Tighten all four bolts
using phillips screwdriver.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact us at:
Last updated: 04/30/18
Step 7
Adjust height of monitors using mm allen key (L) as shown in diagram.
4