Ingrasys B3210E User manual

Ver: v1.00
Quick Installation Guide
B3210E

B3210E Quick Installation Guide
v1.00
Ingrasys Technology Inc.
Package Contents
B3210E Camera Stand Power Adapter
(Optional)
Screws Pack
Quick Installation
Guide
Product CD Warranty Card
screws
Quick Installation Guide
1
A B D E
F G H VIP Card (Optional)
I
Fixed Lens
(Optional)
C

v1.00
Ingrasys Technology Inc.
B3210E Quick Installation Guide
v1.00
Screws Pack
Physical Description & Connection
Microphone
Light Sensor LED Indicator DC-12V
AC-24V
RJ-45
Terminal Block
Focus
Assist
Button
Micro SD
DC IRIS MIC in
Audio
Out
Video
Out
Reset
2
55mm
66mm 65.5mm
Connections
1. Dene the type of network device.
2. If the network device supports PoE (Power over Ethernet) function, simply connect the camera to it via
Ethernet cable.
3. If not, the connections to the network device (via Ethernet cable) and AC or DC adapter are required.

B3210E Quick Installation Guide
v1.00
Ingrasys Technology Inc.
3
Assigning IP address
1. Launch Ingrasys Discovery Tool (IngrasysDiscovery.exe). The tool will start searching and then displaying the
cameras on the Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static
IP address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if
the camera is password protected. (Default ID/Password : Admin/Admin)
4. Click on the “Browse” button to get access to the camera web page immediately.

v1.00
Ingrasys Technology Inc.
B3210E Quick Installation Guide
v1.00
4
1. Launch IE browser and input the IP address of the camera, or click on “Browse” button on Ingrasys Discovery
Tool. The web page with video will then be shown as below.
Accessing the camera
2. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime.
The network URL is rtsp://Camera IP/stream1. The example given below is that live video is displayed
with QuickTime player.

B3210E Quick Installation Guide
v1.00
Ingrasys Technology Inc.
5
A considerate design of groove located on the sides. Users can arrange the DC-Iris cable neatly.
Cable Management

v1.00
Ingrasys Technology Inc.
B3210E Quick Installation Guide
v1.00
Focus Assist Button
Focus Assist Button allows users to adjust the camera focus with precision by a simple click.
Flashing Green → Steady Amber
Step 1: "Press" Focus Assist Button
● Rotate the lens focus clockwise or anticlockwise to either end (N or ∞).
● Press and hold the button for 3 seconds until LED indicator ashes from Green light to Amber light.
Step 2: Adjust Focus
● Keep the camera pointing to the same scene during the tuning process .
● Start tuning the focus in order to turn the LED Green.
● If LED displays Red light, it indicates the opposite turning direction.
focus controller
Step 3: Get the Best Focus Value
● When camera gets correct focus, the LED will become Green flashing.
● Remain the camera's pointing direction until the LED becomes steady Green.
Focus
Assist
Button
6

Ingrasys Technology Inc.