Ingrasys D3011E User manual

Quick Installation Guide
D3011E
Ver: v1.0

D3011E Quick Installation Guide v1.00
Ingrasys Technology Inc.
Package Contents
1
D3011E Ceiling Mount Installation Pack
Quick Installation Guide
Screws & Anchors Alignment Sticker
AB
E
Product CD
C
Lens adjustment tool
DVIP Card (Optional)
F

v1.00
Ingrasys Technology Inc.
D3011E Quick Installation Guide v1.00
2
Physical Description & Connection
Connections
1. Identify the type of network device.
2. If the network device supports PoE (Power over Ethernet) function,
simply connect the camera to it via Ethernet cable.
3. If not, both Ethernet cable and DC adaptor should connect to device
Product Side View
Product Front View
DC Power
LAN
Lens
IR LED
Slide lock
Cable side cover
A
B
A
B

D3011E Quick Installation Guide v1.00
Ingrasys Technology Inc.
Mounting the Camera
1. Place the alignment sticker on the ceiling which was preferred and drill three holes into the ceiling for cable
and screws
2. Connect and route Ethernet cable or DC cable through the ceiling
(Note: remove the cable side cover once the cable route from the side)
3. Attach the camera to the ceiling by two screws.
4. Place the cover into the camera and ensured it locked.
3Lens direction indicator
12 2 3 4

v1.00
Ingrasys Technology Inc.
D3011E Quick Installation Guide v1.00
4
Tuning the Camera
1. Push the slide lock rightward to remove the dome cover
2. Adjust tilt angle by turning tilt adjustment screws
3. Fit the lens adjustment tool to lens and tune up focus by adjustment tool
4. Place the dome cover into camera module and ensured it locked
Rotate
Tilt adjustment screw
Focus
1
2
3 4

D3011E Quick Installation Guide v1.00
Ingrasys Technology Inc.
5
Assigning IP Address
1. Launch Ingrasys Discovery Tool (IngrasysDiscovery.exe). The tool will start searching and then displaying the
cameras on the Device List after they are found.
2. Check the checkbox to select a camera device from the list.
3. The IP Camera may be assigned with a valid IP address via DHCP server. It can be also manually given a static
IP address. To do so, click on “Set IP”, and then input the IP, Subnet Mask and Gateway. Input account info if
the camera is password protected. (Default ID/Password : Admin/Admin)
4. Click on the “Browse” button to get access to the camera web page immediately.

v1.00
Ingrasys Technology Inc.
D3011E Quick Installation Guide v1.00
6
Accessing the Camera
1. Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool.
The web page with video will then be shown as below.
2. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL
is rtsp://Camera IP/stream1. The example given below is that live video is displayed with QuickTime player.

D3011E Quick Installation Guide v1.00
Ingrasys Technology Inc.
7
Wireless Setting-Manual
1. If the network device supports PoE function, simply connect the camera to it via Ethernet cable.
Otherwise both Ethernet cable and DC cable should connect to device.
2. Enter the web page setup > Network > Wireless
Choose the AP which want to be connected and click the “Select”
4. Once the setting complete, disconnect the Ethernet cable and then reboot the camera.
(Note: USB WiFi Dongle as optional parts for WiFi function)
3. Type in the SSID and shared key same as what set on your router/AP and click the save button.

v1.00
Ingrasys Technology Inc.
D3011E Quick Installation Guide v1.00
8
Wireless Setting-WiFi Direct Mode for mobile device
1. Press WiFi Mode button on camera over 1 sec but less than 3 sec, Amber LED turns on. The camera will act as
a WiFi AP at meantime.
2. Scan the camera AP from smart phone/tablet WiFi Setup menu and link to the camera WiFi AP.

D3011E Quick Installation Guide v1.00
Ingrasys Technology Inc.
3. Access the camera web page http://192.168.1.1/mobile by browser or scan the QR code as below
Enter to “WiFi setting” to type in the SSID and shared key same as what set on your WiFi router/AP
and click the save button
9
Wireless Setting-WiFi Direct Mode for mobile device
4. The camera WiFi will switch back to client mode and link with the congured WiFi router/AP automatically.

v1.00
Ingrasys Technology Inc.
D3011E Quick Installation Guide v1.00
10
Wireless Setting-WPS Function
1. Press the WPS (WiFi Protected Setup) button on your WiFi router/AP to trigger connection function
2. Press WiFi mode button on camera over 3 seconds then LED1 and LED2 starts to ash (the Amber LED and
Green LED start to ashing every 1 second which only last 2 minutes)
3. Once successful connection or WPS function timeout (2 minutes), the LED2 (Green) keeps steady on
WPS

Ingrasys Technology Inc.