Olympus IM005 User manual

Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a safe
place for future reference.
We recommend that you take test shots to get accustomed to your camera
before taking important photographs.
The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
If there are additions and/or modifications of functions due to firmware
update for the camera, the contents will differ. For the latest information,
please visit the Olympus website or contact your Olympus Consumer
Support Team in your region.
Instruction Manual
DIGITAL CAMERA
TG-5
Model No. : IM005

2 EN
Unpack the box contents
The following items are included with the camera.
If anything is missing or damaged, contact the dealer from whom you
purchased the camera.
Digital camera Strap Lithium Ion Battery
(LI-92B)
or
USB-AC adapter (F-5AC) USB cable (CB-USB12)
Other accessories not shown: Warranty card
Contents may vary depending on purchase location.
Attaching the camera strap
• Pull the strap tight so that it does not come loose.

3 EN
Names of parts
1Connector cover
2Connector cover lock
3LOCK knob
4 Speaker
5Strap eyelet
6Lens
7Self-timer lamp/LED Illuminator/
AF illuminator
8Flash
9Lens ring release button
0Stereo microphone
aGPS antenna
bnbutton
cZoom lever
dControl dial
eLOG switch
fIndicator lamp
gShutter button
hMonitor
iINFO (Information display) button
jR(Movie)/select button
kMode dial
lq(Playback) button
mAbutton
n/Wi-Fi button
oHDMI micro connector
pMicro-USB connector
qTripod socket
rBattery/card compartment cover
s
Battery/card compartment cover lock
tArrow pad
uF(Up) /F(Exposure
compensation) button
vI(Right) /#(Flash) button
wG(Down) /
jY(Sequential shooting/
Self-timer) / (Erase) button
xH(Left)/mode function button
• FGHI instruct to press the up/down/left/right arrow pad.

4 EN
Preparations for shooting
Inserting and removing the battery and card
1
Follow Steps 1, 2and 3to open the battery/card
compartment cover.
• Turn off the
camera before
opening the
battery/card
compartment
cover.
3
1
2
Battery/card compartment cover
Battery/card compartment cover lock
LOCK knob
2
Insert the battery while sliding the battery lock knob in the
direction of the arrow.
• Insert the battery
as illustrated
with the Cmark
toward the battery
lock knob.
• If you insert the
battery in the
wrong direction,
the camera is not
turned on. Be sure
to insert it in the
correct direction.
• Slide the battery
lock knob in the
direction of the
arrow to unlock,
and then remove
the battery.
Battery
lock knob

5 EN
3
Insert the card straight until it clicks into place.
• Do not touch the metallic parts of
the card directly.
• Always use the specified cards
with this camera. Do not insert
other types of memory cards.
Write-protect
switch
Cards compatible with this camera
SD/SDHC/SDXC/Eye-Fi (with Wireless LAN function) card (commercially
available) (for compatibility card details, visit the Olympus website.)
To remove the card
Press the card in until
it clicks and comes out
slightly, then remove
the card.
4
Follow Steps 1, 2and 3to close battery/card compartment
cover.
• When using the camera,
be sure to close the
battery/card compartment
cover.
11
3
2

6 EN
Charging the battery
1
Check that the battery is in the camera, and connect the USB
cable and USB-AC adapter.
• The battery is not fully charged at shipment. Before use, be sure to
charge the battery until the indicator lamp turns off (up to 3 hours).
Connecting the camera
AC outlet
or
1
2
3
USB cable
(supplied)
Micro-USB connector
USB-AC adapter
Indicator lamp
On: Charging
Off: Charged
Connector cover
2
A menu will be displayed; highlight
[Charge] and press the Abutton.
USB
Storage
MTP
Print
Charge
Exit
Set
For charging the battery abroad, see “Using your charger and USB-AC
adapter abroad” (P. 100).
• Never use any cable other than supplied or Olympus-designated USB cable.
This may cause smoking or burning.
• The included F-5AC USB-AC adapter (hereafter referred to as USB-AC
adapter) differs depending on the region where you purchased the camera. If
you received a plug-in type USB-AC adapter, plug it directly into AC outlet.
• Be sure to unplug the power plug of the USB-AC adapter from the wall outlet
when the charging is complete.

7 EN
• Fordetailsonthebattery,see“SAFETYPRECAUTIONS”(P.120).For detailson
the USB-AC adapter, see “SAFETY PRECAUTIONS” (P. 120).
• If the indicator lamp does not light, reconnect the USB cable and USB-AC
adapter to the camera.
• If the message “No Connection” is displayed in the monitor, disconnect and
reconnect the cable.
When to charge the batteries
Charge the battery when
the error message shown
on the right appears.
Battery Empty
Error messageFlashes in red

8 EN
Turning on the camera and making the initial
settings
When you turn on the camera for the first time, a screen appears enabling
to set the language for the menus and messages displayed in the monitor,
and the date and time.
To change the selected date and time, see “Setting the clock manually,
choosing a time zone, and using GPS to set the clock d[XSettings]” (P. 70)
1
Press the nbutton to turn the camera on, highlight your
language using FGHI (arrow pad) or the control dial, and
press the Abutton.
• In the case that the power is not turned on when you press the n
button, check the direction of the battery. g“Inserting and removing
the battery and card” (P. 4)
2
Use FG (arrow pad) or
the control dial to select
the year ([Y]).
X
YMD Time
2017 Y/M/D
Cancel
3
Press I(arrow pad) to
save the setting for [Y].
2017
Cancel
X
YMD Time
Y/M/D
4
Select the month ([M]), day ([D]), hour and minute ([Time]),
and the date display order ([Y/M/D]) using FGHI (arrow
pad) as described in Steps 2 and 3, and then press the A
button.
5
Use FG (arrow pad) to
select the time zone and
then press the Abutton.
• Daylight saving time can be
turned on or off using the
INFO button.
Time Zone
Seoul
Tokyo
UTC+09:00 (12:30)
Set

9 EN
Using basic functions
Taking photographs (Pmode)
1
Press the nbutton to turn on the camera.
When the camera is turned on, the monitor will turn on.
2
Set the mode dial to P.
In mode P, the camera automatically
adjusts shutter speed and aperture in
response to subject brightness.
3
Frame the shot.
• When holding the camera, take
care not to cover the flash,
microphone or other important
parts with your fingers, etc.
4
Press the shutter button
halfway down to focus.
The focus indicator will blink to
show that the camera is not in
focus. Focus again.
• The shutter speed and
aperture displays will blink
to show that the camera is
unable to achieve optimal
exposure.
Press halfway
125
01:02:0301:02:03
10231023
P
125 F5.6
± 0.0 ± 0.0
L
N
F
FHD
30p
30p
ISO-A
200
S-IS ON S-IS ON
Shutter
speed Aperture value
Focus indicator
5
To take the picture, gently
press the shutter button all the
way down while being careful
not to shake the camera.
Press
halfway Press the rest of
the way down

10 EN
Viewing photographs (Playing back images)
Turn on the camera.
Press the qbutton.
• Your most recent photograph is displayed.
• Press HI (arrow pad) or rotate the control dial to view other pictures.
q button Arrow pad
Control dial
Displays the
previous frame Displays the
next frame
2017.02.26 12:30:00 20
100-0020
L
N
4:3
1012hPa10m 20.5°C
Still image
Index display/Calendar display
• To switch from single-frame to index playback,
rotate the zoom lever counterclockwise. Repeating
the process will increase the number of images
displayed, ending in a calendar display.
g[GSettings] (P. 62)
Counter-
clockwise Clockwise
• Use FGHI (arrow pad) or the control dial to
move the cursor.
• Rotate the zoom lever clockwise to proceed in turn
from calendar to index to single-frame playback.
2017.02.26 12:30:00 21