Init NT-WGM1150 User manual

ASSEMBLY
INSTRUCTIONS
NT-WGM1150
50" 3-in-1 TV Stand with
Integrated Mount
Safety information and specifications ..................... 2
Tools needed..................................................................... 4
Parts...................................................................................... 5
Hardware ............................................................................ 6
Assembly instructions.................................................... 8
Finishing the table top assembly.........................13
Finishing the swivel mount assembly ................14
Finishing the wall-mount assembly....................22

2
Still need help? Call 800-573-2860
Safety information and specifications
CAUTION: This stand’s glass work
surface is intended only for use with a
product not weighing more than 100 lbs.
(45.5 kg) and having a width that will
permit it to sit evenly on the stand with no more
than a one-inch overhang on each side on the top
shelf. Using with other products, including
products that weigh more than the maximum
weight allowed or extend beyond the maximum
width, may result in instability, which may cause
possible injury.
Caution: This product contains small items that
could be a choking hazard if swallowed.
Keep these items away from young children!
Do not lift the glass by the support posts. See
instructions for more details.
Model #: NT-WGM1150
Distributed by Best Buy Purchasing, LLC
Manufacturer: Alart, Inc.
Manufacture Date:
Maximum weight: 100 lbs. (45.5 kg)
Maximum width: 1-inch overhang on each side of
the top shelf
Top shelf (W × D):
50 × 19" (127 × 48.26 cm)
Middle shelf (W × H × D):
44.25 × 9.5 × 15.5" (112.39 × 24.13 × 39.37 cm)
Bottom shelf (W × H × D):
44.25 × 10.13 × 18.13" (112.39 × 25.73 × 46.05 cm)

3
Still need help? Call 800-573-2860
19" (48.26 cm)
19" (48.26 cm)
53" (134.62 cm)
50" (127 cm)
30"(76.2 cm)
17" (43.18 cm)

4
Still need help? Call 800-573-2860
Tools needed
(For optional TV wall mounting)
Drill
Phillips screwdriver
Stud finder
Level
Hammer
Drill bit for
stud wall 3/8" drill bit
for concrete
wall
OR
Pencil

5
Still need help? Call 800-573-2860
Part s
Package contents: parts
AStand body (1) BTop frame (1) CBottom frame (1)
DTop shelf frame-wood(1)
ETop shelf-glass(1) FMiddle shelf-glass (1) GBottom shelf-glass(1)
PTilt mount (1)NVertical support (1) RTV bracket (2)

6
Still need help? Call 800-573-2860
Hardwa re
Package contents: stand hardware
Note: You may receive extra hardware.
Make sure you have all the hardware necessary to assemble your new TV stand:
Label Hardware Qty.
H2
I4
J4
K2
L2
Small
thumbscrew
Medium
thumbscrew
Large
thumbscrew
Long
thumbscrew
Shelf support
An optional anti-tipping hardware kit is included.
Instructions on how to install the hardware are
included on the bag containing the kit.
Label Hardware Qty.
M2
Q1
R2
S1
T1
Shelf lock
Pivot plug
TV mount
bracket
For Steel
Touch-up pen
for steel
For Wood
Touch-up pen
for wood
10 20 30 40 50 60 70 80 90 100mm
1234in

7
Still need help? Call 800-573-2860
Wall-mount hardware
Package contents: wall-mount hardware
Note: You may receive extra hardware.
Make sure you have all the hardware necessary to assemble your new TV stand:
Label Hardware Qty.
D2
E4
F4
G4
H4
I4
J4
Safety bolt (2)
M4 × 12 m
m
bolt
M4 × 16 mm
bolt
M5 × 16 mm
bolt
M6 × 16 mm
bolt
M8 × 16 mm
bolt
M5 × 36 mm
bolt
Label Hardware Qty.
K4
L4
M4
N4
P4
Q4
R4
M6 × 36 mm
bolt
M8 × 36 mm
bolt
Square
washer
Long bolt
Wall anchor
Long bolt
washer
Spacer

8
Still need help? Call 800-573-2860
Assembly i nstructions
Step 1 Unfold the stand body (A), then insert the shelf supports (L) into the side frames.
You’ll need:
L(2)

9
Still need help? Call 800-573-2860
Step 2 Attach the top frame (B), then secure it into place with two large thumbscrews (J).
Note: Make sure the front of top frame (B) engages with the side supports on the stand body.
You’ll need:
J(2)

10
Still need help? Call 800-573-2860
Step 3 Attach the bottom frame (C), then secure it into place with two large thumbscrews (J).
Note: Make sure the front of bottom frame (C) engages with the side supports on the stand body.
You’ll need:
J(2)

11
Still need help? Call 800-573-2860
Step 4 Attach the top shelf frame (D) with two small thumbscrews (H).
• For Table Top and Wall Mount assembly, continue to next step.
• For Swivel Stand assembly, continue to page 14.
You’ll need:
H(2)

12
Still need help? Call 800-573-2860
Step 5 Secure the top shelf (E) to the shelf frame (D) with four medium thumbscrews (I), then secure the middle
and bottom glass shelves (Fand G) with a shelf lock (M).
• For final Table Top assembly, continue to the next step.
• For Wall Mount installation, continue to page 18.
You’ll need:
I(4) M(1)

13
Still need help? Call 800-573-2860
Finishing the table top assembly
Step 1 Optional: Install the anti-tipping hardware. Instructions are included on the bag containing the hardware.
You need to remove the one of the top thumbscrews, place the loop on the tipping restraint over the thumbnail screw
hole, then replace the thumbscrew.
You’ll need:
Phillips screwdriver Drill

14
Still need help? Call 800-573-2860
Finishing the swivel mount assembly
Step 1 Attach the vertical support (N) by sliding the locking bolts at the bottom of the support into the holes on
the stand body, then pressing firmly downward to lock the vertical support into place.
Use long thumbscrews (K) to secure the vertical support (N) to the top of the stand frame.
Align the holes on the tilt mount (P) pivot bracket with the holes on the vertical support (N) pivot bracket, then insert
the pivot plug (Q) to lock the tilt mount (P) in place. The pivot plug (Q) will insert easily when the two pieces are aligned
correctly.
You’ll need:
K(2) Q(1)

15
Still need help? Call 800-573-2860
Step 2 Attach the TV mount brackets (R) to the back of the TV. Make sure that each TV mount bracket (R) is
oriented with the “UP” label on top.
If you TV has a flat back, go to page 16.
If you TV has a curves back or obstruction, go to page 17.

16
Still need help? Call 800-573-2860
Mounting instructions for a TV with a flat back:
Select the screws appropriate for your TV and use square washers (M) to attach the brackets to the back of your TV.
You’ll need:
M4
M5, 6
M8
, ,
E(4) F(4)
OR OR
H(4) I(4)
OR
M(4) Phillips screwdriver

17
Still need help? Call 800-573-2860
Mounting instructions for a TV with a curved back or obstruction:
Select the screws appropriate for your TV. Use square washers (M) and spacers (R) to attach the brackets to the back of
your TV.
You’ll need:
M4
M5, 6
M8
, ,
J(4) K(4)
OR OR
L(4)
M(4) Phillips screwdriver
R(4)

18
Still need help? Call 800-573-2860
Step 3 Attach the TV mount brackets (R) to the tilt mount (P).
Lift the TV up to the tilt mount (P).
Warning: Use at least two people to mount the TV onto the tilt mount.
Set the hooks on the TV mounting brackets (R) over the tilt mount, then lower the hooks onto the bars of the tilt mount.

19
Still need help? Call 800-573-2860
Step 4 Center the TV and let the bottom of the TV rotate downward until it is against the vertical support. Insert
the safety bolts (D) to secure the TV in place.
You’ll need:
D(2)
Phillips screwdriver

20
Still need help? Call 800-573-2860
Step 5 To adjust the tilt angle, securely hold the top and bottom of the TV, then carefully pull the top of the TV
toward you or press it toward the vertical support (N).