Inland Craft Wizard IV User manual
INSTRUCTION MANUAL
Wizard IV grinder
2
SAFETY INSTRUCTIONS
Setup
Intended for indoor use only.
Avoid dangerous environments. Do not
use this machine near gasoline or other
Make sure machine is securely placed
on a sturdy, level surface with ample
working area and away from open
electrical outlets.
Do not place grinder in a pan, on a
towel, or on carpeting.
Check for damaged parts. Before use,
Use only Inland Craft Wizard IV
grinder parts for replacement parts.
Know your power tool.
Usage
Always wear proper eye protection to
wearing safety goggles or safety glasses
the machine while it’s in use, they must
IMPORTANT! READ FIRST
SAVE THESE INSTRUCTIONS.
WARNING:
This warning applies to the 1" and 1/4" diamond grinder bits.
3
SAFETY INSTRUCTIONS
Always wear proper apparel. Do not
Keep work area well lit and clean.
Do not operate unattended.
Do not operate this machine while
under the inuence of drugs, alcohol
or any medication.
Never run diamond grinder bits dry.
Never grind more than one workpiece
at a time.
Some materials contain poisonous
elements.
Do not allow water to run down the
shaft and into the motor.
Do not overll the water reservoir.
Do not force the tool or attachment to
Avoid awkward operations and hand
positions.
Always stay alert.
Maintenance
Always disconnect from power
before servicing. Disconnect machine
Do not abuse the power cord.
Do not open the motor housing.
Clean and dry machine after use.
4
TABLE OF CONTENTS
2
7
9
10
11
REGISTER YOUR PRODUCT
your machine is essential to facilitate
can also register at inlandcraft.com/
product-registration
5
WARRANTY INFORMATION
What does this warranty cover?
What does this warranty not cover?
Who is covered under this warranty?
Whom should I contact if I need a warranty service?
You must prove that you are under warranty by providing us with the
original invoice of your machine or by registering your product in order
to receive our warranty service.
Registering your grinder machine helps facilitate
any warranty-related requests.
6
11
MACHINE DETAILS
1
2
3
6
10
78
9
1.
2.
3.
4.
5.
6.
7.
8.
9.
w/ Allen wrench
10.
w/ Allen wrench
11.
4
5
7
Filling the coolant
reservoir
*IMPORTANT NOTES: Never pour
water directly onto the grinder bit or
down the motor shaft. Do not overll
the coolant reservoir; overlling
can create an electrical shock and
damage the motor. Do not use
antifreeze as a coolant.
ASSEMBLY
Installing the grinder bit
1
2
3
4
5
do not force!
6
Fig. A
Fill to
here
FaceShield
Storage compartment
8
ASSEMBLY
Fig. C
*IMPORTANT NOTE: Always tighten
and secure grinder bit set screws
to the at side of the motor shaft.
Tightening the grinder bit to the
rounded side can scar the shaft and
prevent bit removal. Never force a
bit onto the motor shaft and never
attempt to pry off a bit. If the bit
is stuck, please review our FAQ at
inlandcraft.com/faq rst. If you still
need assistance, please contact
Inland Craft at (248) 583-7150.
Fig. B
BitSert
Splash guard
Flat side
motor shaft
Grinder bit
set screw
Sponge placement
9
Fig. D
USAGE
Grinding
How to drill a hole in glass
Fire it up!
10
MAINTENANCE
Motor
Motor shaft
Coolant reservoir tray
Work surface
Coolant sponge
Keep your switch clean
youtube.com/inlandcraft
11
ACCESSORIES
inlandcraft.com
Jewelry bit
SKU
MagnaShield
SKU
Diamond drill bit
SKU
LED lamp attachment
SKU
10011
Grinding/drilling bit
adapter
SKU
Diamond coolant
to your water to increase
SKU
Manufactured by
Phone
Email
Website
Facebook
Instagram
YouTube
Table of contents
Other Inland Craft Grinder manuals
Popular Grinder manuals by other brands
Jet
Jet JNS-185 Operating and maintenance instructions
BE Ag & Industrial
BE Ag & Industrial Agri Ease BE-SGG Series Operations & parts manual
SUHNER ABRASIVE
SUHNER ABRASIVE LFB 44-DH Technical document
Skil
Skil Masters 9786 instructions
Grizzly
Grizzly G3622 owner's manual
Maktec
Maktec MT961 instruction manual
Westfalia
Westfalia WMDSFW120 Original instructions
Ryobi
Ryobi EAG750RB user manual
Wolfe
Wolfe Neo 230 Series Translation of the original instruction
Chicago Pneumatic
Chicago Pneumatic CP875 Operator's manual
Atlas Copco
Atlas Copco LSF28 S250-2 Original product instructions
Eastwood
Eastwood TUNGSTEN GRINDER instructions
