Innovative THEPROTECTOR Air Purifier-500 User manual

THEPROTECTOR Air Purifier-500
Owner's Manual
READ AND SAVE THESE INSTRUCTIONS
WARNING!
Please note that the air purifier should only be used with parts approved by
supplier. The use of unauthorized parts or alterations to the machine could void your warranty.
Contact an approved distributor for further assistance.
To Avoid the Risk of Fire or Electric Shock:
•Unit must be electrically grounded.
•Insert 3-prong plug directly into outlet with Ground Fault Circuit Interrupting device.
•Do not use an adapter with this unit.
•Do not use the unit in standing water.
•If electrical parts get wet, they must be dried prior to use.

Precautions before use
1.Please make sure all filters paking bags removed before the machine plug in power
supplier,otherwise it will cause risks or damage to the machine,like no filting,machine does not
work,etc.
2. The power supplier must be cutted off before replace any filters,all filters must use autherised or
approved components,otherwise it will effect the filter efficience or cause damage to the machine.
INTRODUCTION
The air purifier is a convenient filtration system that cleans the air. The air purifier uses an
effective blend of air flow and advanced filtration to expel airborne particles like mold spores, dust,
pollen, and pet dander. The air purifier is ideal for for restoration jobs, including water, sewage,
and fire.
IDENTIFICATION
Congratulations on purchasing this air purifier . In order to take advantage of the warranty plan, be
sure to note the serial number and date of purchase.
Serial Number: Date of Purchase:
HOW IT WORKS
When set to maximum airflow, purifier s pass through three types of filters -- pre-filters, H13 HEPA
filters and activated carbon filters.
1. Pre-Filter
The first phase of filtration, the pre-filter, Captures initial dust and allergen particles.
2. Composite HEPA filter: include HEPA Filter (H13) and Activated Carbon Filter
2.1 HEPA Filter (H13):The third stage of filtration, the HEPA filter, captures even smaller particles,
up to 0.3 microns.Helps control and prevent the growth of bacteria, bacteria and
molds.Capturing 99.99% of dust and allergens.
2.2 Activated Carbon Filter:Multi-pore impregnated activated carbon can strongly adsorb VOC
and remove formaldehyde. High-quality impregnated activated carbon has developed pore
structure and can firmly adsorb formaldehyde, VOC and other gaseous pollutants. After the
impregnation of the active solution, the active molecules in the carbon hole can gradually
remove the absorbed part of formaldehyde.
3. UV-C Light
UV-C light technology works with filters to enhance the elimination of airborne germs Titanium
Dioxide is activated by the UV-C light to decompose remaining odor molecules caused by smoking,
cooking, and pets.
SPECIAL FEATURES
Daisy-Chain Capability
Using the auxiliary outlet on the control panel, you can link up to 3 units together. You can also
daisy-chain the machines when they are stacked vertically (limit of 2 units).
Multi-Positional
The air purifier can be operated in the vertical position, as well as, when stacked vertically (up to 2

units). When storing, the machines can be stacked horizontally to save space.
KEY FEATURES

INSTRUCTIONS
SETUP
1. Place the air purifier so that it is in the upright, vertical position.
2. Plug the machine into a standard 120 volt outlet. Note: Each unit needs 3.6amps to operate.
3. Power the unit on and adjust the speed by turning the variable speed control. The maximum
speed is 500 CFM.
4. The air purifier can be operated in the vertical or horizontal position, depending on the exact
situation. At this point, adjust the machine to the optimal position.
5. When the machine total working time add up to 2000 hours, the filter replacement
warning light on the control panel lights up to remind you to replace the
filter. (To reset the machine, it had to push the UV-C light
Switch 3 times continuously in 3 seconds after Reset the filter service time )
6. UV-C sterilization lamp fault detection function: when the UV-C sterilization lamp does not work, the
buzzer will keep ringing.
THE CONTROL PANEL
Variable Speed Control
Variable speed control is used to adjust the power of the machine.Turn the knob in a clockwise
direction, to increase the speed from minimum speed to maximum, the minimum speed setting is
located immediately close to OFF.
Auxiliary Outlet
If more air filtration is necessary for a space, you can "daisy chain" or link up to 3 air purifier to the
same outlet. There is a maximum amperage of 12 when the units are turned off, a maximum of 8
amps when the units are turned on. Other equipment can be plugged into the same outlet as the
air purifier as long as it doesn't go above the max amperage.
Overload protector
If the current through the socket exceeds 15 Amps, the current protector will protect the device. If
this happens, the current protector will cut off the power supply to the socket. The socket will not be
energized until reset is pressed.
Timer
Used to time the running time of the device. Start timing when the device is running, and pause
timing when the device is stopped.
Control function

CHANGING THE FILTERS
1. Loosen the 2 locks that hold the filter board in place.
2. Slide out the filter panel board.
3. Remove the used filters and replace with new filters.
WARNING
•Always wear approved protective gear when changing the filters.
•Filters should be changed after each remediation job.
•If the indicator light is on, always change the HE PA/Activated Carbon Filter.
APPLICATIONS
Water Damage
In this application, the air purifier should be placed in the center of the affected area. The air
purifier will draw in the air, filter it, then blow out the newly cleaned air. To begin the
process.simply turn on the purifier and it will start cleaning the air. Keep in mind that if you are
working in a large area or one divided by walls, you may need several air purifier s to effectively
clean the air.
Odor Control
The air purifier ,when used with the HEPA/Activated Carbon Filter, is excellent at odor control, as
well. Simply place the carbon filter in the pre-filter slot and it will capture a wide variety of
odor-causing gas molecules, such as volatile organic compounds (VOC's), smoke, soot, and paint
fumes.
Other Uses
The air purifier is also useful in many other applications including mold remediation, fire damage,
dust control, and sewage remediation.
WARNING!
Breathing Hazard
When using the air purifier in a containment area, always turn off power to open combustion
appliances, such as fireplaces, furnaces, water heaters, and HVAC systems, to avoid the risk of
back drafting carbon monoxide fumes.
If the Filter Change Light illuminates during the remediation process, immediately change the
HEPA/Activated Carbon Filter.
Tipping Hazard
•Use caution when stacking units.
•The machine cannot be stacked
•Falling equipment could cause bodily harm.

WARNING!
WARNING: To reduce the risk of electric shock, do not expose to water or rain.
WARNING: NOT SUITABLE FOR USE WITH SOLID-STATE SPEED CONTROLS
CAUTION:To reduce the risk of electric shock,connect only to an outlet provided with a ground
fault circuit interrupting device.
WARNING – Skin or eye damage may result from directly viewing the light
produced by the lamp in this apparatus. Always disconnect power before relamping or
servicing.Replace Lamp With Lamp ZW4S15W-Z135, DC20V, 160mA 100-280nm.
SAFETY NOTES
•Always unplug the unit prior to performing any maintenance.
•Check the power cord for damage (fraying, cuts, etc.) before use.
•To avoid electric shock, never use a water hose or pressure washer to clean the electrical
components.
•Check the pre-filter prior to operating the machine to ensure it is not clogged. If there is any sign
of airflow restriction change the filter.
•Make sure the unit is dry prior to installing clean filters.
•When using the air purifier for remediation purposes, replace both filters at the same time and
always clean machine in between jobs. This will help prevent cross contamination.
WARRANTY
All warranty benefits apply to the original owner only Warranty cannot be transferred or assigned.
Customer Responsibilities: In order to take advantage of the warranty service, the customer
must do the following:
1. Customer must provide normal care and maintenance (including, but not limited to cleaning
filters)
2. Removal and re-installation of unit is the sole responsibility of owner.
3. If customer cannot return unit to certified repair center, all costs associated with shipment are
borne by the customer. ln addition, all ancillary charges related to freight shipments, including but
not limited to palletizing, wrapping, labeling,and pickup are associated with customer.
4. If shipped, customer is responsible for all risk of loss or damage.
Warranty Exclusions:
DAMAGE DUETO THE FOLLOWING IS NOT covered under warranty
1. Acts of Nature- including but not limited to:
Flooding
Fire
Water damage
Hurricane/storm
Damage
2. IMPROPER USAGE- Including but not limited to:
Misuse, abuse, or tampering whether intentional or accidental
Improper installation or design

Improper voltage
Lack of normal care
Failure to follow instructions
3. Corrosion
4. Freezing
5. Any additional costs due to changes in laws or building codes
6. Freight charges
7. Any costs due to lost profit or delay
8. Damage to property
9. Cause beyond control
10. Consumable parts, including but not limited to:
Filters
Batteries
Power cords
Valves
Switches
Rubber parts
11. Direct, indirect, collateral or inconsequential damages of any kind
Wiring Diagram: