Insignia NS-DPF10WA-09 User manual

__INSIGNIA
NS-DPF10WA-09
Digital Picture Frame
Contents
introduction.
Safety information..
Features.
Setting up your Irame.......
Using your frame.
Maintaining.
Troubleshooting.
Specifications.
Legai notices.
Six-month limited warranty...
.1
. 2
.4
.IB
..15
.29
.3D
..31
.32
.33
Introduction
Congratulations on your purchase of a high-quality
insignia product. Your new digital picture frame
represents the state of the art in digital picture frame
design and is designed lor reliable and trouble-free
performance.
ducts, C O
1

INSIGNIA_
— ■ i-Tir r-w ■ rn i —iim
Safety information
1 CAUTION 1
BISK OF ELECTFlfC SHOCK
DC NOT Ol^N
l ho lightning ll.oh with arrowhead symbol
within tin equilateral triangle, is intern it m r,. ai@rt
Thu * ustn tn the immoncn ut uniTi^uInlnd
"elm 11 jr = n..il j ; - v Itugcf within Ihn produr 1 ■ .
nrurlosiirt) thid iTmybnoi sufiicumt may nil odd lo
Coniililulc? a risk at aiaptHc shm k
S ha tmr ..nUon point wiliilri an nqiHl.ilnml
triungjh in Intended ln Alorl (hn unoi tn (he
fHHruiilt r Of ImpiHtiint (jpUMlinn iiiul
mnlnii'Nnm<• (Mirvloiitgi ifmhiii uojv. \n ihn
. liit'Mtuia nt Fompnnyfnij the tiiijitnl plcuim
I tnimii
AI wny ■ follow tlioiio hi ink 'minty prntMui on?,
wlion ii«lny your digital picture frame, This wilt
imlLicu lim (f(,k nl Imiiludik shot k .mil Injury
Warning
111 lo reduco the risk of Nio or shook bn.mrd,
do nol n'vposu tiio h nmo to aim m iimisHm 1
• In prevent tiio risk of electric slunk, do not
remove tiio covei them am no
usei serviceable potta inside HHm oil
servicing to qualiHed personnel
* Do not place the unit in direct sunlight or
no or any source of hoot, otherwise the
surface of the digital picture frame inm
warp, change color or be damaged.
WWW Ml St Q11 \ 8 - p rrXI UCtS. ’. ■ C f:
' , : •- i£ - • • HO
2
■ ! _ _INSIGNIA
* Tins product is designed for indoor use only.
* Un p l u g th o fram© befoi e perfo r min g
maintenance of when th© home is not in use.
* Do not block ttm ventilation holes on the back ol
tiio tin me at any hum.
* Prelect lim power cord, Route powm cnrrts so
they arc nut likely to bo walked on of pinched by
ilcil:, placed on nr nrjuilist tlmni. Pay parlmuloj
a Mont i on to thn i t whom the cord attar has in
tiio frame
* Only uta .1 the At: powm adnpim mctudml with ihn
frurno U&ing nny otiiei powtM adaptor will void
yovjr wan only
* Do rmt lot (oh (In 11 rto i in | r n otatnin
Additional care and maintenance
* Wipe Hm I t;[) gently wilfi n stiff, lint fron cloth or
an unhealed loro, oloohiny tissun. Dp net UiHi
f I mm lag aolulUn in tntlii i rh lynnd npno [finally
fm lid f » < ri'Hfr. F > ■ « not allow chdrnk ntfc nor b
an riiihliih tallhfi, to i irhlmJ jumied oidrn ns.
- 11 1 ! r v 1 l I' agianrrn|hfo nto KSHi.iiiln In ,umn
cminlrip!;
www .insignia- p rod ucts.com
3

- s ~ ays 3is'ta; pictures (JPG. JPEG formatt»„H
c : ta slideshows without a computer 1 and
-'Sp'-ay pictures directly from a memorv cam
USB drive {not included). y d or
Bright dear digital 10" TFT-LCD screen
Compatible with a wide variety of memory cards
deluding SD. MMC, Memory Stick, Compact '
Flash, and xD.
Compatible with USB flash drives.
Multi-image mode displays multiple pictures at
the same time in a slideshow.
On-frame button controls and infrared remote
control.
128 MB internal memory.
kage contents
• 10 insignia digital picture frame
• AC power adapter
• Remote control with battery and holder
• User Guide
• Quick Start Guide
• Mini USB cable
• MS Pro Duo adapter
Connectors and controls
#
Description
1
SD/MMC/MS/xD card slot
2 CF card slot
3 USB jack
4 mini-USB jack
5
Back button
6
Y Down button
7 A Up button
8
ENTER HI Enter/Play/Pause button
9
► Right button
to
*4 Left button
11
Menu button
12
RC slot

insignia
MS-DPF10WA-09
#
Description
1
LCD screen
T"
Remote control sensor
NS-DPFIOWA-OA
INSIGNIA
Back and left side
#
Description
1 j Stand
2
Power switch
3
Power jack
6
OGliCIS.C
■ www insignla-prodiii
7

INSIGNIA
Remote control
INSIGNIA
#
i.
Button
Press to _
M HA CHOW
\
play u 'Am show nr Trte
muftHrnaye display __
MENU
Display it - S<Wup mem*
8
INSIGNIA
7T“
Button
1
Press to
3
Ml
Direction
M t>vo l.h« menu selection up,
\ ^
down, backward, or forward
rr
f NTER/Panon/ ’ i the hiQhltyhlnd option or to
| fafi)
Plgjy
pan v- and ro-.nrrM.: thn ikk- Oiow
5
$.!
4-“—-
- 3 U GI
Cdl^CJ thft picture In copy Or
Oninfo
ft
BACK
Return to the previous menu
t
7
TSfcT” ■
0|- . • • p
: j
Pfiiise mod*
8 ZOOM
flaynsfy If i# procure
c
%
atta
• Enter Tr jr'-003:7 rwje or '0
%
H**i *! ■ !/; manage?
d f IfiO Or f V
g 10
■ :,.
' POT/'If.
->>;o oir'a/ood p:o* ao
PO deg r
—
m t&jvi
* Copy o-r " o 'aaoooT
| %
p
* Copy a 5 to the Oema
r> C-?r /
* f>j Of/; »; 4 ' 0 ' f " 0 ff 1( r " •.;
memory,
---
9

Setting
Setting up the remote control
cont'o
To set up the remote
1 f^wwetteplia^tabsnaieaii
_ ‘ A ' -M T>
tL- -— T > « *•
'&T":0 F « 1 S"3.
vorktsi
j A
www^signi ° 0 U 4:! ’
■
J
i
INSIGNIA
TOle €
d f» any ofeatoctefc MMm
:?rci a.f*d ir» ramc-ifc sartor.
11

INSIGNIA _
Turning on the frame
IS-DPF10WA-09
To turn on the frame:
1 Extent the adjustable siano
2 hotate we stand to position the frame vertically or
horizontally. Adjust the stand s length to obtain the
viewing angle you want
12
WWW.
insignia-pioducts.com
INSIGNIA
. . . . . . , „ , .....S-aw#
3 PSu 9 the AC power adapter ento the frame's DC
power connector and into an AC power outlet.
www Jn$i§nia-products,corn

INSIGNIA
^ ohdfi t^i0 P-Ouvpr
turn on the frame Tbe^GNi* ,fte 0N -
for several seconds, then ?hew *° 90 16 *5plLi
starts a slideshow of the Dictiiro« n ^ a tJ ' 0 ,t ’ a, ' cal| ¥
memory (when no memoF^C °'° a " Werra
memory card is presenl the fram*^ esefl, i "a
picture(s) stored on the memory^ ,he
.insignia-proclucts.co'rTi
INSIGNIA
Mounting your frame on a wall
Use wail-anchoring hardware (not included) to anchor
your frame securely to ygor wooden wall
To change to portrait, turn your frame &0 and use the
watt mounting holes at the top,
MaunlittQ hole Mounting hole
Using your frame
You can use your dighot ploture f m me to:
* Play ft slideshow of pictures on u memory card
* Play a bi«c Jo show of picture in infernal memory
* Adjust a pictures view
* Change display sotting r j
* Copy pictureo or files to internal memory
* f j'-.iotf pictures or files Porri Internal memory
m
15

INSIGNIA
Playing slideshows
You can choose to begin a slideshow automatically iron
the first picture on the internal memory or the memory
card, or you can start a slideshow manually from a *
specific picture or file,
To automatically start a slideshow:
1 I n s ert a memory card into one of the available
memory slots.
-OR'
Connect a USB device,
:tn
QQ UCt$ - C *
16
INSIGNIA
A slideshow ol pictures from the memory card or
USB device automatically starts to play.
Caution
Memory cards tit into the card slots in only one
direction. Do not force a memory card into a
slot. The card should tit snugly when inserted
correctly, Some cards require an adapter to fit
correctly. For more information on supported
memory curds, see "Specifications'* on
page 31,
2 P r ess Ml ENTER to pause the slideshow on a
particular picture, Press Hi ENTER again to
resume the slideshow.
To manually start a slideshow:
1 I n s e r t a memo ry ca rd i nto o ne of t he ava i I a bis
memory slots or connect a USB device A slideshow
of pictures from the memory card or USB device
automatically starts to play.
2 Press D BACK, repeatedly until the Home menu
opens.
Hofrw_ : ■ , - ■
|« #Hfc' <*
*•»*** '
stiH
insignia
3 p r ess M or ► to highlight the card {or internal
memory) that you want. Your selection turns green.
w w w i n s; • i r • a • p to d uc ts . com 17

INSIGNIA
4
?h 9 S fh^l EN -T- ER t0 enter the Thumt >naii mode
: he thumbnail images appear on the screen.
Press ^ or ^ to highlight a picture then Dress
SLIDESHOW on the remote control. The SkfeL*
starts from the picture you selected.
6 Press HI ENTER to pause the slideshow, then
press HI ENTER again to resume the slideshow.
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from an attached memory card to the- frame's
internal memory.
Notes
You cannot copy pictures from the internal
memory to an attached memory card and you
cannot copy pictures between attached
memory cards.
Because you cannot copy pictures back from
the frame to a memory card, the frame should
not be treated as your primary picture storage
method. Make sure that you have the pictures
stored elsewhere (such as a memory card).
If you want to copy pictures from the interna!
memory to an attached memory care, you car
use a USB cable to copy pictures between the
memory card, internal memory, and the
computer. ___ _
insignia
To copy selected pictures to internal
memory;
1 Press t) BACK until the Home screen opens.
Horn®
A A MM'.
t* H>*
ri
ti
6
nr!
mm
I4ri#4 1 * fll.'
fl
m.
INSIGNIA
2 Press 4 or ► to high I i ght the memory ca rd you want
to play from, then press HI ENTER, The Thumbnail
screen opens with the pictures displayed.
j* %w?t
T ISlrtll
'fjua.*8 '*•>;
M • f LM
insignia
Press -4 ► A ▼ to highlight each picture you wan?
to copy, then press ss (SELECT) to mark it, A check
mark appears in the up per-right corner of each
marked thumbnail. Mark as many pictures as you
want to copy.
19

INSIGNIA
4 P/8SS — (DEL COPY:. The Copy screen opens
5 Press A f !o hrghlight Copy Selected or Copy AJI
then press HI ENTER
6 P'£$s A T to highlight YES, Eher> press HI ENTER
again. The selected pictures are transferred to
Internal memory (12B MB),
Connecting your digital picture frame to
your computer
Pictures can be transferred to your digital picture frame
using your persona! computer., To connect to a computer
you need the supplied mini USB cable,
Mote
Tour digital picture frame may not work with all
versions of Microsoft Windows.
To connect your digital picture frame to
your computer:
With your digital picture frame turned off, plug the
small end of the USB cable into the small connector
on the frame, then plug the large USB connector into
ubb port on your computer.
INSIGNIA
“ — ' ,
2 Tum on your digital picture frame.
The computer recognizes the picture frame as a
drive and the following dialog Pox opens,
Note
When your digital picture frame is connected
to the computer with the USB cable, the large
USB slot cannot be used at the same time.
21

INSIGNIA
3
i 'Ik - k OR. A My t k w ifnihu Window (similar foih* An
below) opons '
drive. The letters of the drives may be different on
your computer, depending on how many drives
already exist, the figure above shows the internal
memory of the frame and the two card slots (SQ.
MMC/MS/xD and Compact Flash) as removable
drives E:. F: P and K;.
4 Click on the frame s drives to show the contents of
the internal memory and any memory cards inserted
into the card slots. All three drives can be opened
into separate windows. Files can be transferred from
your computer to your digital picture frame by
dragging the files from a folder on your computer to
any of the three drives on the unit. The internal
memory is 128 MB.
■ _insignia
Deleting pictures from internal
memory
You cannot delete pictures from an attached
memory card
Because you cannot copy pictures hade from
the frame to a memory card, the frame should
not be Treated as your primary picture storage j
method. Make sure that you have the pictures ;
stored elsewhere (such as a memory card),
To delete pictures from internal memory:
1 Press BACK until the Home screen opens.
23

:WI A
2 Press 4 or ► to highlight the internal memo ™
then press HI ENTER. The Thumbnail screen ^
opens with the pictures displayed.
3 Press ^ ^ A ? io highlight each picture you want
to delete, then press a SELECT to mark it. A check
mark appears in the upper-right corner of each
marked thumbnail. Mark as many pictures as you
want to delete.
4 Press ee*[s (DEUCOPY). The Defete screen opens.
5
S
Uf-kfe icHfKti
SIGNIA
Press A. ▼ to highlight Delete Selected or Delete
All, then press HI ENTER. ^
Press A T to highlight YES. then press Ml EN
again. The selected pictures are deleted.
INSIGNIA
Customizing picture display
You can rotate, magnify, and display information about
any picture that the frame displays.
To rotate a picture:
1 While a picture is displayed full screen (not as a
thumbnail), press G ROTATE. The picture is rotated
90" clockwise with each press of the button,
2 Press HI ENTER to continue the slideshow.
Tip
When you rotate a picture stored in internal
memory, the rotation information is saved.
To magnify a picture:
1 While a picture is displayed full screen (not a
thumbnail), press fl {ZOOM). The picture is
magnified in size each time you press the button until
it returns to the normal size.
Tip
While the picture is magnified, press the arrow
buttons to pan the picture so you can see the
parts that are off the screen.
2 Press HI ENTER to continue the slideshow,
To view picture information:
1 White a picture is displayed full screen {not a
thumbnail), press INFO. An information screen
appears lor five seconds that contains the file name,
file size, resolution, and date and time the picture
was taken.
2 Press HI ENTER to continue the slideshow.
ducts
25

NSIGNIA
Setting viewing options
You can change aii of the viewing options m the Setup
menu using the buttons on the top o* the frame or or the
remote control You can display the Setup menu at any
time by pressing MENU- Only the available setup options
are displayed for each menu.
To set viewing options:
1 Press t) BACK until the Home screen opens.
Home
SJJWtoC w
V44
n n
i* f
insignia
2 Press the arrow Keys to niymiyn ■ < —— ;;
then press HI ENTER- The Setup menu op'- 15
3 Press A. ▼ to highlight a display option- thWFtt* 8
HI ENTER to select the option. A second ■ ■ e
opens, listing the available settings.
a Press Ml ENTER again to open a third ^
4 square icon ( ■ ) to the right of an option shows the
currant setting.
5 Press A ▼ to highlight a setting, then press
fell ENTER to select the setting.
a * rtf tn close the
6 When you are tinisfiah. press J s c[e en.
Setup menu and return to the previous scree
INSIGNIA
Setup options
The following descr&es Setup menu opr
Menu
Y
option
Settings
Description
Slideshow
:ntervai
j
i
5 Seconds
10 Seconds
30 Seconds
Sets the interval between
each picture transition in a
slideshow
1
:
\ Minute
1 Hour
24 Hours
Slideshow
transition
i
•
Normas
Random
Fade
Curtain left Right
Sets the special effects used
to transition from one picture
to the next in a slideshow.
! ;
Curiam Top’Bottom
Open Door
Cross Comb
Slideshow
' shuffle
On
Oil
Displays pictures in a different
(random) order than they
appear on the memory
source
picture date/
time stamp
On
Oh
Displays the date and lime
that a picture was taken. This
does not work in m< jltHiriage
display mode.
image
display
formal
Normal
! Zoom {default)
Wide
Cinema
Adjusts now the picture is
sized to fit the screen. Zoom
(default sotting) fins the screen
without black bars.
»ww instgnia productS.com 27
- ■■■ -V
.

INSIGNIA
Menu
option
Settings
Description
Copy type
Normal
Maintains the
resolution while c Q p V i^ r,9ma
Resize
space in the internaCX
Power
saving
Off
15 Minutes
30 Minutes
1 Hour
2 Hours
6 Hours
Sets the power save option if
the buttons on the frame Jr '
remote control are not used for
the specified time, the frame
enters Power Saving
(Standby) mode.
To turn the frame back on
press any button on the frame
Language English
Spanish
French
Sets the language used in the
setup menus.
Factory
settings
Demo Mode
Reset All Settings
Erase Internal
Memory
Software Version
Displays pictures from internal
memory for demo purposes.
Resets ail settings to origin a
default settings.
Erase all files stored in interne
memory.
Displays the firmware version
istanta-
28
__INSIGNIA
Maintaining
Cleaning the LCD screen
Treat the LCD screen carefully. The screen is made of
glass and can be scratched or broken To clean
fingerprints or dust from the LCD screen, we recommend
using the cloth provided (or a soft, non-abrasive cloth
such as a camera lens doth) or an LCD cleaning kit.
Cleaning the digital picture frame
Clean the outer surface of the digital picture frame
(excluding the screen) with a soft doth dampened with
water.
Replacing the remote control battery
To replace the remote control battery:
1 Turn the remote control over.
2 White pressing down on the ridged area of the
battery cover, slide the battery tray out and remove
the old battery.
3 Place a new CR2025 (or equivalent) lithium battery
in the tray, with the positive (+) side facing up.
4 SlicJe the battery tray back into the remote control
29

INSIGNIA
Problem
_
Solution "
The frame w»8 not
torn on,
Thr ... i f II ill" riii
thepk&jre frame, c^t^epS^SS? 9 ®^*
pe pcfAS'' DuGon *>*’•*£«»* ■ ]
- me-^r/ os'"
r sertec .h ' v 0
Tame tr >
* : . e « yo-or pictures
• J^satethWfieBw^^^— -H
Wewppofied tormatt aea Sat#ȣ:
* r e C*r£ are JPGuPEG "
*
sure that the memory card« ^ JL
*y into the card sic* o
conectfy. then turn $ txadc on. A|k §
WOnOs /o o should s*e ycttr M satf,/* |
* Try formating the car
* Some digital cameras saw* image
formats other than JPEG Redeftoyoee
camera's manna, for deytf*
• JET - ■ "
The fiame displays
some pictures
Slower than others.
Higher resolution pictures load mora steady J#
using lower resell tort p?ct«ras :.' a' ■ ■■
(compressing or rasing. th#r r C-c
camera's user guide for instructions s*>
: down-sampling your pictures .—
INSIGNIA
Specifications
Screen siira
\ 10 2* 259 mm!
j Screen fcnmss*
: scre^ T 5 :9)
Memory card format
* ■ ' Comtwct- fliip- ■
■ M'T 1 / S&cx *
* Mr**med*a Caro *SWMC**j
* Secure 7 " fSOl
* *0h*
; OWflte w^-sOTi faifwsrre
• .Memory $r>cx D-iO’**
- y^-rvU' ,' h'CT-
+ Sfogfr PRO Dus’ 11 **
* v StxXf Micxc ^
• mboSD tB
* ^'«j‘ tt s v
’ ; £ . - r, r , *
: Sumiurt JPG-jIfIg’
| rooy^2W AC. 50-80H/
* ■ T
; i Power con*umptk)n ; s <J %w
[ Operating *emp j 41 -95 fr T <5-35"C)
f 2.21 m (TO kg)
Dimensions (WrO*H) : l£.4* x 8.fT K 1 1"
1315 mm x 226 mm x 28.5 mm)
Internal memory
128 MB
com
31
30
•-y u ' ■

INSIGNIA
NS-OPF'0WA-Q9
Legal notices
FCC Part 15
This &*'**#$ With & ** FCC Optra**? of
«*** pnxiws IS sUaar* to tf» tofc* **> r )
ijevce may not c&i$e twmtui ^2) tr*s oews
rjiist koM an* trmr^renc^ m, a^xi ^x.dsfxj that
ms* cause opemton
FCC warning
& v&tfx*bom om *PC^«3 fcv She party
rospcrabte for compters ws* she FCC mAaa ootid vend £>e
use^ **#ȣ*% to operate Sw equapmant
Canada ICES-003 statement
r*« €%s$ft<*g0af astowttus cm#** w*h Cjrao.t -
C£3«X!3
/mage use restrictions
er*g*$ pf»-toKted oo tv» &&* ^ctore *
nck’^Ksrv-^^ ^ C Qt&xmt x<
**£***&*• -TK- . ,:
&&*** ***** r«? rc^Hic^»d
L . ■ •:’ ■ < A*g
32
www .lnsignia-proctucts.com
NS-aPRIWA-C®
INSIGNIA
Six-month limited warranty
warrants to YOU tb® Ofkxh^
■ ' . : ; - ;'": N S X.
' * • 00 w . >--'-rv <Sf ?UX> 0* O^tVlS -1 th» CW^f'.*
T;T^^ ***** A >* ^**^3** ^ tx-w
£ r . ' ;vh ' " i h f * r 0 * 1 ^ if^ i*A**s* of m
Fr^ic: Warrant* ^vxf:- W Px*t^ mus ? b*
piitcftas** tom a' authors iie«kv ^ txw,
T! 1 .^ atfirarrCy dots v? tee? f^v?fe>S’^d Frg&ft K %p •
r ' ° r ' v ' & f r >^ the Ww'r*tv * a Otftoc*
eo\e : e d fey :x$. warranty t ? \u rc<$uras smxe arms at
v+v '~ ,va^ant\ appr*
Haw long does the coverage last?
TXe Warranty fto-r x: : 4sx tor 6 fftoot r- $ fxv *ba da to nx
2c'chased t’x Pxxtuct T: 'v- oysv^asa Co ass pr ?'*.t o ^
VVdaf does fft/s warranty cover?
OunngewWun^f%M*^cr9 ^>M«Ak*w»<jI
•»^ S -«i*, m » y i| fj « {, . • y l |« B ‘ fai , -v 1 ^, , , _ ._• ^
W*PW»l|l- r W 1/lvwltJTVp.lS?;^ W cW ^vWW ■ •’>
detotwwj to t*& ctotod^e fejf to*#**
df aWSL'i'*^! wiSI i(iit Isd#
opfec^v (t> the ^->jixs o?
i3i nt’-r- : aoi Pwx^ct at w? c^a : oe w&? fm* c? nafat^l
OOmpMfc^ p^Xti4C*S or r^rts -' ;VXi pjfte
?e0aeed uhder thss Aarr^rh nkoo’w ttw pxwm o#
ir^gmia and arc not rcftarad to you ?tswvtoa of
Prcducis or parts ara rc^rcd akf tit? W:s -mnrv Faood
evp-ne$ you must pay at kits?* and parts Cftarswa Th«s
warranty test* as Jo^i as you own you? loatignii Pfcxlu^t
durmg tha Warranty redod. Warranty ocwMpt
tarminatoa «r yot^ soil'Or omawse ircnstof tna.F?xtuot
33