Insignia NS-DPF7WA-09 - Digital Photo Frame User manual

User Guide | Guide de l’utilisateur | Guía del Usuario
7"/8" Digital Picture Frame
Cadre photo numérique de 7/8 po
Marco para fotos digitales de 7"/8"
NS-DPF7WA-09/NS-DPF8WA-09
NS-DPF7SA-09.fm Page 1 Tuesday, April 8, 2008 7:36 PM

NS-DPF7SA-09.fm Page 2 Tuesday, April 8, 2008 7:36 PM

www.insignia-products.com
3
NS-DPF7WA-09
NS-DPF8WA-09
Digital Picture Frame
Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Setting up your frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Using your frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Six-month limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Legal notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Introduction
Congratulations on your purchase of a high-quality Insignia product.
Your new photo frame represents the state of the art in digital picture
frame design and is designed for reliable and trouble-free
performance.
NS-DPF7SA-09.fm Page 3 Tuesday, April 8, 2008 7:36 PM

4
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Safety information
Always follow these basic safety precautions when using your digital
picture frame. This will reduce the risk of fire, electric shock, and
injury.
• This product is designed for indoor use only.
• Unplug the frame before performing maintenance.
• Do not block the ventilation holes on the back of the frame at
any time.
• Keep the frame out of direct sunlight and away from heat
sources.
• Protect the power cord. Route power cords so they are not
likely to be walked on or pinched by items placed on or against
them. Pay particular attention to the point where the cord
attaches to the frame.
• Only use the AC power adapter included with the frame. Using
any other power adapter will void your warranty.
• Unplug the power cord from the power outlet when the frame is
not in use.
Warnings
To reduce the risk of fire or shock hazard, do not expose the
frame to rain or moisture.
To prevent the risk of electric shock, do not remove the
cover. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel.
NS-DPF7SA-09.fm Page 4 Tuesday, April 8, 2008 7:36 PM

5
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Features
• Displays digital photos (JPG/JPEG format) and digital slide
shows without a computer.
• Display photos directly from a memory card or USB drive
(memory card and USB drive not included).
• Bright, clear TFT LCD screen.
• Compatible with a wide variety of memory cards:
• Compact Flash
®
• Memory Stick
®
• Memory Stick Duo™
• Memory Stick PRO™
• Memory Stick PRO Duo™
• Memory Stick Micro™
• Multimedia Card (MMC™)
• Secure Digital™ (SD)
•microSD™
•miniSD™
•xD™
• Compatible with USB flash drives.
• Multi-image mode displays multiple photos at the same time in
a slide show.
• On-frame button controls and infrared remote control.
• 128 MB internal memory.
Package contents
• Digital picture frame (size varies by model)
• AC power adapter
• Memory Stick Duo adapter
•UserGuide
• Quick Start Guide
• Remote control
• Remote control holder
• Cleaning cloth
NS-DPF7SA-09.fm Page 5 Tuesday, April 8, 2008 7:36 PM

6
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Connectors
# Description
1 Memory card slot. Supports Compact Flash (CF)
2 Memory card slot. Supports:
• Memory Stick
• Memory Stick Duo
• Memory Stick PRO
• Memory Stick PRO Duo
• Memory Stick Micro
• Multimedia Card (MMC)
• Secure Digital (SD)
•microSD
• miniSD
•xD
3 USB (type A) port
4 DC power connector
5 Adjustable stand.
NS-DPF7SA-09.fm Page 6 Tuesday, April 8, 2008 7:36 PM

7
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Buttons
You can use most of the frame’s features by using either the buttons
on top of the frame or by using the remote control. Selecting files for
copying, deleting, or viewing requires the remote control, and the
instructions in this guide refer to remote control buttons (except where
noted).
# Description
1 Power/STAND-BY—Press to turn the frame on or off.
2 Left arrow—Press to move the menu selection left or to display the
previous photo.
3 Right arrow—Press to move the menu selection right or to display
the next photo.
4 Enter/Play/Pause—Press to select menu items. During a slide
show, press to pause or resume.
5 Up arrow—Press to move the menu selection up.
6 Down arrow—Press to move the menu selection down.
7 Back—Go back to previous selection or screen.
NS-DPF7SA-09.fm Page 7 Tuesday, April 8, 2008 7:36 PM

8
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Remote control
# Description
1 MENU—Press to display the Setup menu.
2 SLIDE SHOW—Press to start a slide show or toggle the multi-image
display mode.
3 Up—Press to move the selection up.
4 Left—Press to move the menu selection up or left, display the previous
photo, or select the previous file.
5 Down—Press to move the menu selection down.
6 BACK—Press to go back a screen.
7 INFO—Press to display photo information.
8 DEL/COPY—Press to delete selected photos from internal memory or
to copy selected photos from the connected memory card to internal
memory.
9 ZOOM—Press to magnify the photo.
10 ENTER/Play/Pause—Press to select the highlighted option or to pause
and resume the slide show.
11 Right—Press to move the menu selection right.
12 SELECT—Press to select an image to copy, delete, or slideshow.
13 Thumbnails—Press to display thumbnails of your photos or a file list.
14 ROTATE—Press to rotate the photo.
NS-DPF7SA-09.fm Page 8 Tuesday, April 8, 2008 7:36 PM

9
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Setting up your frame
Setting up the remote control
To set up the remote control:
• Remove the plastic tab that extends past the bottom edge of
the remote control. This tab protects the battery, and the
remote control will not work until it is removed.
NS-DPF7SA-09.fm Page 9 Tuesday, April 8, 2008 7:36 PM

10
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Setting up the frame
To set up the frame:
1Attach the remote control holder to the back of the frame using the
mounting holes.
2Plug the AC power adapter into the frame’s DC power connector
and into an AC power outlet.
NS-DPF7SA-09.fm Page 10 Tuesday, April 8, 2008 7:36 PM

11
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
3Extend the stand from the back of the frame, then place the frame
on a flat surface. Adjusting the stand changes the frame’s viewing
angle.
The frame automatically turns on and starts playing a slide show
of the photos stored in internal memory. This slide show is called
Demo mode.
4To turn off Demo mode, point the remote control at the front of the
frame and press (play/pause/ENTER).
Tip You can also disable and re-enable Demo mode from the
Setup menu. For instructions, see “Setting veiwing options”
on page 16.
NS-DPF7SA-09.fm Page 11 Tuesday, April 8, 2008 7:36 PM

12
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Using your frame
You can use your digital picture frame to:
• Play a slide show of photos on a memory card
• Play a slide show of photos in internal memory
• Adjust a photo’s view
• Change display settings
Playing slide shows
To play an instant slide show from a memory card:
1Insert a memory card (or USB drive) into one of the available
memory slots or the USB port.
The digital picture frame automatically starts a slide show of the
photos on the memory card.
2While the slide show is playing, press ( / /ENTER) to pause
and resume the slide show.
To play a slide show from any attached memory card or from
internal memory:
1Press (BACK) repeatedly until the Select Card menu opens.
Caution
Memory cards fit into the card slots in only one direction. Do
not force a memory card into a slot. The card should fit
snugly when inserted correctly. Some cards require an
adapter to fit correctly. For more information on supported
memory cards, see “Specifications” on page 21.
NS-DPF7SA-09.fm Page 12 Tuesday, April 8, 2008 7:36 PM

13
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
2Insert a new memory card into the appropriate slot, or
press or to select internal memory or an existing memory
card. For instructions on copying files from a memory card to
internal memory, see “Copying photos to internal memory” on
page 13.
3Press (SLIDE SHOW) on the remote control. A slide show
begins that displays the content of the source you specified.
Copying photos to internal memory
You can copy a single photo, multiple photos, or all photos from an
attached memory card to the frame’s internal memory.
To copy selected photos to internal memory:
1Press (BACK) until the Select Card screen opens.
2Press or to highlight the memory card you want to copy
from, then press ( / /ENTER). The thumbnail screen opens.
NoteThe option to select a card type or USB drive is disabled if
there is no card of that type inserted into the corresponding
slot or port.
Tip You can press (thumbnail/file list) to switch between
thumbnail mode and file list mode. Thumbnail mode
displays all files on the selected memory source, and File
List mode displays files and folders.
Notes
You cannot copy photos from the internal memory to an
attached memory card, and you cannot copy photos
between attached memory cards.
Because you cannot copy photos back from the frame to a
memory card, the frame should not be treated as your
primary photo storage method. Make sure that you have the
photos stored elsewhere (such as a memory card).
Tip If you begin marking images at this point, you are prompted
whether you want to copy the marked images. Select YES.
NS-DPF7SA-09.fm Page 13 Tuesday, April 8, 2008 7:36 PM

14
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
3Press or to highlight each photo you want to copy, then
press (SELECT) to mark it. A check mark appears at the
upper-right corner of each marked thumbnail.
4Press (DEL/COPY), press or to select Copy Selected,
then press ( / /ENTER). The selected files are copied.
To copy all photos to internal memory:
1Press (BACK) until the Select Card screen opens.
- OR -
If you are already viewing the thumbnails or file list, skip to Step 3.
2Press or to highlight the memory card you want to copy
from, then press ( / /ENTER). The thumbnail screen opens.
3Press (DEL/COPY), press or to select Copy All, press
to select YES, then press ( / /ENTER). All files are copied.
Tip To de-select a photo, press SELECT again.
NS-DPF7SA-09.fm Page 14 Tuesday, April 8, 2008 7:36 PM

15
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Deleting photos from internal memory
To delete selected photos from internal memory:
1With thumbnails of the internal memory displayed,
press to highlight the photo you want to delete, then
press (SELECT). A check mark appears at the upper-right
corner of the thumbnail.
2Repeat until all photos you want to delete are selected.
3Press (DEL/COPY), press or to select Delete Selected,
press to select YES, then press ( / /ENTER). The
selected files are deleted.
To delete all photos from internal memory:
1With thumbnails of the internal memory displayed, press (DEL/
COPY), press or to select Delete All, then press ( / /
ENTER). All files are deleted.
Customizing slide shows
You can set up a slide show using either all of the photos or selected
photos.
To set up a slide show of selected photos:
1Press (thumbnails).
- OR -
If a slide show is in progress, press (BACK) to access the
thumbnail screen.
The thumbnails screen opens.
2Press or to highlight the photo you want to select, then
press (SELECT). A check mark appears at the upper-right
corner of the thumbnail.
Notes
You cannot delete photos from an attached memory card.
Because you cannot copy photos back from the frame to a
memory card, the frame should not be treated as your
primary photo storage method. Make sure that you have the
photos stored elsewhere (such as a memory card).
Tip To de-select a photo, press SELECT again.
Tip A slide show of selected photos can only be set up by using
the remote control.
NS-DPF7SA-09.fm Page 15 Tuesday, April 8, 2008 7:36 PM

16
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
3Repeat until all photos you want to add to the slide show are
selected.
4Press (SLIDE SHOW) on the remote control. A slide show of
the selected photos is played.
5To end the slide show and clear the selected items,
press (BACK) repeatedly to return to the Select Card menu,
then press ( / /ENTER) to select the memory card or internal
memory.
Customizing photo display
You can rotate and magnify any photo that the frame displays.
To rotate a photo:
1While a photo is displayed full screen (not as a thumbnail),
press (ROTATE). The photo is rotated 90° clockwise with each
press of the button.
2Press (SLIDE SHOW) to continue the slide show.
To magnify a photo:
1While a photo is displayed full screen (not as a thumbnail),
press (ZOOM). The photo is magnified in size each time you
press the button, until it returns to the normal size.
2Press (SLIDE SHOW) to continue the slide show.
Setting veiwing options
You can change all of the viewing options in the Setup menu using
the buttons on the top of the frame or on the remote control. You can
display the Setup menu at any time by pressing MENU. Only the
available setup options are displayed for each menu.
To set viewing options:
1Press (BACK) repeatedly to until the Select Card screen
opens.
2Press the arrow keys to highlight the SETUP icon, then
press ENTER. The Setup menu opens.
Tip When you rotate a photo stored in internal memory, the
rotation information is saved.
Tip While the photo is magnified, press the arrow buttons to pan
the photo so you can see the parts that are off the screen.
NS-DPF7SA-09.fm Page 16 Tuesday, April 8, 2008 7:36 PM

17
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
3Press or to highlight a display option, then press ENTER to
select the option. A second menu opens, listing the available
settings. A square icon ( ) to the right of an option shows the
current setting.
4Press or to highlight a setting, then press ENTER to select
the setting.
5When you are finished, press (BACK) to close the Setup menu
and return to the previous screen.
Setup options
The following table lists and describes all Setup menu options:
Menu option Settings Description
Language English Spanish
French
Languages used in the Setup
menu.
Slideshow
Transition
Normal
Random
Fade
Curtain Left-Right
Curtain Top-Bottom
Open Door
Cross
Comb
Specialeffectsusedto transition
from one photo to the next in a
slide show.
Slideshow Interval
5 Seconds
10 Seconds
30 Seconds
1 Minute
1 Hour
1 Day
The interval between each
photo transition in a slide show.
Frame Orientation Landscape
Portrait
Displays photos correctly for the
frame in landscape (horizontal)
orientation or for portrait
(vertical) orientation.
Photo Date/Time
Stamp On
Off
Displays the date and time that
a photo was taken. This does
not work in multi-image display
mode.
Slideshow Shuffle On
Off Displays photos in a different
(random) order than they
appear on the memory source.
Display Format Normal Wide
Cinema
Adjusts how the image is sized
to fit the screen.
NS-DPF7SA-09.fm Page 17 Tuesday, April 8, 2008 7:36 PM

18
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Power Saving
Off
15 Minutes
30 Minutes
1 Hour
2 Hours
6 Hours
If the frame or remote control’s
buttons are unused for the
specified time, the frame enters
Power Saving (Standby) mode.
To turn the frame back on,
press on the frame.
Copy Type
Normal Maintains the photo’s quality
while copying.
Resized Optimizes (compresses) the photo while copying to save
space in internal memory.
Factory Settings
Demo Mode On/Off Displays pictures from internal
memory for demo purposes.
Factory Default Resets all settings to factory
default values.
Erase Internal
Memory Deletes all of the images stored in internal memory.
Version Displays the firmware version.
Menu option Settings Description
NS-DPF7SA-09.fm Page 18 Tuesday, April 8, 2008 7:36 PM

19
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Maintaining
Cleaning the LCD screen
Treat the LCD screen carefully. The screen is made of glass and can
be scratched or broken. To clean fingerprints or dust from the LCD
screen, we recommend using the cloth provided or a soft,
non-abrasive cloth such as a camera lens cloth.
If you use a commercial LCD cleaning kit, do not apply the cleaning
liquid directly to the LCD screen. Instead, clean the LCD screen with
the cleaning cloth slightly dampened with the liquid.
Cleaning the digital picture frame
Clean the outer surface of the digital picture frame (excluding the
screen) with a soft cloth dampened with water.
Replacing the remote control battery
To replace the remote control battery:
1Hold the remote control face down.
2While pressing down on the ridged area of the battery cover, slide
the battery tray out and remove the old battery.
3Place a new CR2025 (or equivalent) lithium battery in the tray, with
the positive (+) side facing up.
4Slide the battery tray back into the remote control.
NS-DPF7SA-09.fm Page 19 Tuesday, April 8, 2008 7:36 PM

20
NS-DPF7WA-09 NS-DPF8WA-09 Digital Picture Frame
www.insignia-products.com
Troubleshooting
Problem Solution
The frame won’t turn on. The power adapter is not securely connected to
the picture frame, or the power switch is not on.
Check power adapter connections, then press the
STAND-BY button.
A memory card is
inserted in the frame,
but you can’t view your
photos.
Make sure that the memory card is one of the
supported formats and that the files on the card
are JPG/JPEG image files. Some digital cameras
save images in formats other than JPG/JPEG.
Refer to your camera’s manual to make sure that
your camera is storing photos as JPG/JPEG files.
Your memory card may be faulty or inserted
incorrectly.
• Turn the digital picture frame off and make
sure that the memory card is inserted all the
way into the card slot and is inserted
correctly.
• Turn the frame on. After a few seconds, you
should see your first photo.
•PressBACK to open the Select Card
screen.
• Select the card, then press ENTER. You
should see the thumbnails screen listing all
photos on the card. If you don’t, you may
want to try another card.
The frame displays
some photos slower
than others.
Higher resolution photos load more slowly. Try
using lower resolution photos or down-sampling
(compressing or resizing) them. See your
camera’s user guide for instructions on
down-sampling your photos, or see “Setting
veiwing options” on page 16 for instructions on
automatically resizing and compressing your
images while copying from the memory card to
internal memory.
NS-DPF7SA-09.fm Page 20 Tuesday, April 8, 2008 7:36 PM