Insignia NS-BC48SS7 User manual

Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
48-, 78-, 115-Can
Beer and Beverage
Cooler
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/
NS-BC120BS8

www.insigniaproducts.com
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Grounding requirement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Components (48-can model shown). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Setting up your beer and beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Before using your beer and beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . .6
Finding a suitable location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Leveling your beer and beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Providing proper ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Providing a proper power supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using your beer and beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Standby mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Light key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Switching the temperature setting between Fahrenheit and Celsius . . .8
Memory function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Reversing the door on your cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Filling your beer and beverage cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Auto Defrosting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Maintaining your beer and beverage cooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Storing your beer and beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Moving your beer and beverage cooler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Tips on saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Fault indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your
NS-BC48SS7, NS-BC84SS7, NS-BC120SS7, or NS-BC120BS8 represents the
state of the art in beer and beverage cooler design and is designed for
reliable and trouble-free performance.

3
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Important Safety Instructions
WARNING
1Read these instructions.
2Keep these instructions.
3Heed all warnings.
4Follow all instructions.
5Do not use this appliance near water.
6Clean only with a damp cloth.
7Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the appliance.
11 Do not attempt to modify or extend the power cord of this appliance.
12 Unplug this appliance during lightning storms or when it will not be
used for long periods of time.
13 Make sure that the available AC power matches the voltage
requirements of this appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within your beer and beverage cooler.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying your beer and
beverage cooler.

4
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
14 Do not handle the plug with wet hands. This could result in an electric
shock.
15 Unplug the power cord by holding the plug, never by pulling the cord.
16 Do not turn the appliance on or off by plugging or unplugging the
power cord.
17 Turn off the appliance before unplugging it.
18 Refer all servicing to qualified service personnel. Servicing is required
when the appliance has been damaged in any way, such as the
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the appliance, the appliance has been exposed
to rain or moisture, does not operate normally, or has been dropped.
19 To reduce the risk of fire or electric shock, do not expose this appliance
to rain, moisture, dripping, or splashing, and no objects filled with
liquids should be placed on top of it.
WARNING
Electric Shock Hazard
Failure to follow these instructions can result in
electric shock, fire, or death.
1WARNING–Keep ventilation openings in the beer
and beverage cooler clear of obstruction.
2WARNING–Do not damage the refrigerant tubing
when handling, moving, or using the beer and
beverage cooler.
3WARNING–Do not use electrical appliances inside the storage
compartment of the beer and beverage cooler, unless they are of the
type recommended by the manufacturer.
4WARNING–DANGER—Never allow children to play with, operate, or
crawl inside the beer and beverage cooler.
Risk of child entrapment. Before you throw away your old beer and
beverage cooler:
1) Take off the door
2) Leave the shelves in place so that children may not easily climb
inside
5Unplug the beer and beverage cooler before carrying out user
maintenance on it.
6This beer and beverage cooler can be used by children age 8 years and
older and persons with reduced physical or mental capabilities or lack
of experience and knowledge if they are given supervision or
instruction concerning the use of the beer and beverage cooler in a

5
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
safe way and understand the hazards involved. Children should not
play with the beer and beverage cooler. Cleaning and maintenance
should not be performed by children without supervision.
7If a component part is damaged, it must be replaced by the
manufacturer, its service agent, or similar qualified persons in order to
avoid a hazard.
8Follow local regulations regarding disposal of the beer and beverage
cooler due to flammable refrigerant and gas. All refrigeration products
contain refrigerants, which under the guidelines of federal law must
be removed before disposal. It is the consumer's responsibility to
comply with federal and local regulations when disposing of this
product.
9This beer and beverage cooler is intended to be used in household
and similar environments.
10 Do not store or use gasoline or any flammable liquids inside or in the
vicinity of this beer and beverage cooler.
11 Do not use an extension cord with this beer and beverage cooler. If the
power cord is too short, have a qualified electrician install an outlet
near the beer and beverage cooler. Use of an extension cord can
negatively affect the beer and beverage cooler’s performance.
Grounding requirement
This beer and beverage cooler must be grounded. This beer and beverage
cooler is equipped with a cord having a grounding wire with a grounding
plug. The plug must be inserted into an outlet that is properly installed
and grounded.
Improper use of the grounding plug can result in a risk of electric shock.
Consult a qualified electrician or service person if the grounding
instructions are not completely understood, or if doubt exists as to
whether the beer and beverage cooler is properly grounded.
Features
• 48-can, 78-can, or 115-can capacity (depending on the model purchased)
• Temperature range from 34° to 50° F (1° to 10° C)
• Fan accelerates refrigeration cycle and improves cooling (78- and 115-can
coolers only)
• Touch controls and LED display
• Interior white LED light
• Removable shelf

6
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
Package contents
• 48-can, 78-can, or 115-can beer and beverage cooler
• Removable chrome shelves (One in the 48-can cooler, three in the 78-can
cooler, and four in the 115-can cooler)
•UserGuide
Components (48-can model shown)
Setting up your beer and beverage cooler
Before using your beer and beverage cooler
• Remove the exterior and interior packing.
• Let the beer and beverage cooler stand upright for approximately a
half hour before connecting it to power. This reduces the possibility of
a malfunction in the cooling system from improper handling during
transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
DO
• Place your cooler on a floor, countertop, or cabinet that is strong enough
to support it when it is fully loaded.
• Allow 1.6 inches of space on all sides of the cooler to allow for proper air
ventilation.
• Place the cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and
heat sources may increase electrical consumption. Room temperature
below 50°F (10°C) or above 85°F (29.4°C) will hinder the performance.
Leveling feet
Fan (78- and
115-can models)
Steel bar (to prevent
cans from falling out)
Removable shelves (2)
Control
panel/display Glass door

7
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
DON’T
• Recess or build it in. This cooler is designed to be free standing only.
• Place the cooler in moist areas.
• Use the cooler in a garage or any other outside installation.
Leveling your beer and beverage cooler
• It is very important for the beer and beverage cooler to be level in order to
function properly. If the beer and beverage cooler is not leveled during
installation, the door may not close or seal properly, causing cooling, frost,
or moisture problems.
• To level your beer and beverage cooler, you may either turn the leveling
foot clockwise to raise that side to the beer and beverage cooler or turn it
counter-clockwise to lower that side.
Providing proper ventilation
• Place the beer and beverage cooler at least 1.6 inches from the wall to
ensure proper airflow to the compressor.
• Do not place the beer and beverage cooler near any heat sources, such as
a heater or stove, as this may put a strain on the compressor.
Providing a proper power supply
Check your local power source. This beer and beverage cooler requires a
110V-120V, 60 Hz power supply.
Use a receptacle that accepts the grounding prong. The power cord is
equipped with a 3-prong (grounding) plug which mates with a standard
3-prong (grounding) wall outlet to minimize the possibility of electric
shock hazard from this beer and beverage cooler.
Notes
• The beer and beverage cooler should always be plugged
into its own individual electrical outlet which has a voltage
rating that matches the rating plate.
• Never unplug your beer and beverage cooler by pulling on
the power cord. Always grip the plug firmly and pull
straight out from the outlet.
3-prong receptacle
Receptacle box cover
3-prong plug
Grounding lead
Grounding adapter Receptacle box cover
Screw
Receptacle
Using a 3-prong plug and outlet Using a grounding adapter

8
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
Using your beer and beverage cooler
Display
When you plug in your beer and beverage cooler for the first time, the
display screen turns on for three seconds, then the start-up tone rings.
Standby mode
To enter standby mode, press the Standby key continuously for three
seconds. The buzzer sounds and the display turns off.
To return to normal mode, press the Standby key.
Light key
Press the Light key to turn on or turn off the light. The buzzer sounds
when the light is turned on or off.
Setting the temperature
Press the Temperature up ( ) or down ( ) buttons, to increase or
decrease the temperature by one degree.
The temperature range is 34~50°F (1~10°C).
Switching the temperature setting between Fahrenheit and
Celsius
Press and hold the Temperature up ( ) and down ( ) buttons at the
same time for three seconds to switch between Fahrenheit and Celsius.
Memory function
When the cooler is turned off, it remembers the current set temperature
and returns to that setting when it’s turned back on.
Caution
• The control keys should be pressed gently.
• Avoid scratching the control panel with sharp objects.
• Keep magnets away from the control panel. Otherwise the
cooler will not set and operate normally.
°
°F/°C
Standby key Light key Display
Temperature
up key
Temperature
down key

9
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Reversing the door on your cooler
All parts removed must be saved to do the reinstallation of the door.
1Remove top cap, then remove the three screws that hold the upper
hinge (right side) to the top of the cabinet.
2Carefully remove the top hinge, then lift the door up off of the bottom
hinge and place it on a padded surface to prevent scratching it.
3Remove the three button plugs from the upper left corner of the
cabinet and transfer them to the holes on the opposite side. Be sure to
press the button plugs firmly into the holes.

10
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
4Remove the three screws that hold the bottom hinge to the lower part
of the cabinet.
5Re-install the bottom hinge on the left corner of the cabinet.
6On bottom edge of the door, transfer door stop bracket and bushing
to holes on opposite side.
7Place the bottom left corner of the door onto the lower hinge, then
install the top hinge onto cabinet. Make sure the door is level and it
seals properly against cabinet, then securely fasten the three screws.
8Snap the top cap back onto the hinge.

11
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Filling your beer and beverage cooler
The following illustrations are provided to show the best way to fill your
cooler for maximum storage:
The 115 can cooler
Inner row
Top shelf - 8 cans
Second shelf - 16 cans
Bottom shelf - 16 cans
Middle row
Top shelf - 6 cans
Second shelf - 5 cans
Bottom shelf - 5 cans
Outer row
Top shelf - 12 cans
Second shelf - 12 cans
Bottom shelf - 12 cans

12
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
The 84 can cooler
The 48 can cooler
Inner row
Top shelf - 8 cans
Second shelf - 12 cans
Bottom shelf - 6 cans
Middle row
Top shelf - 6 cans
Second shelf - 5 cans
Bottom shelf - 6 cans
Outer row
Top shelf - 12 cans
Second shelf - 12 cans
Bottom shelf - 17 cans
Outer row
Top shelf - 13 cans
Bottom shelf - 17 cans
Inner row
Top shelf - 12 cans
Bottom shelf - 6 cans

13
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Auto Defrosting
During the auto defrosting process, the compressor shuts down and the
frost melts naturally.
When either of the following happens, the process ends and the
compressor starts again:
• The inner temperature is above 41ºF (5º C).
• Defrosting time is longer than 60 min.
The temperature fluctuation during the defrosting process is within 7.2º F
(4º C).
In addition, when the inner temperature setting is above 41ºF (5º C), the
compressor shuts down every six hours. However, as soon as the sensor
detects the inner temperature is above 41ºF (5ºC), the compressor starts
immediately. The temperature fluctuation during this period is within
1.8º F (1º C).
Maintaining your beer and beverage cooler
Your beer and beverage cooler is designed for year-round use with only
minimal cleaning and maintenance.
When you first receive it, wipe the case with a mild detergent and warm
water, then wipe dry with a dry cloth. Do this periodically to keep your
beer and beverage cooler looking new.
Cleaning the interior of your beer and beverage cooler:
1Turn off the beer and beverage cooler and unplug it from the wall
outlet.
2Remove all beer and beverages.
3Wash the inside with a damp warm cloth soaked in a solution of one
quart of lukewarm water to two tablespoons of baking soda solution.
4Be sure to keep the door gasket (seal) clean to keep the unit running
efficiently.
5Dry the interior and exterior with a soft cloth.
Caution
To prevent damage to the finish, do not use:
• Gasoline, benzine, thinner, or other similar solvents.
• Abrasive cleaners.

14
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
Storing your beer and beverage cooler
1Turn off the beer and beverage cooler and unplug it from the wall
outlet.
2Remove all beer and beverages.
3Clean the beer and beverage cooler.
4Leave the door open slightly to avoid possible formation of
condensation, mold, or odor.
Moving your beer and beverage cooler
1Turn off the beer and beverage cooler and unplug it from the wall
outlet.
2Remove all beer and beverages.
3Securely tape down all loose items inside your beer and beverage
cooler.
4Tape the door shut.
Be sure the beer and beverage cooler stays in the upright position
during transportation.
Tips on saving energy
•Place your cooler in the coolest area of the room, away from heat
producing appliances or heating ducts and out of the direct sunlight.
•Do not overload the cooler because it forces the compressor to run longer.
•Do not open the door too often, especially if the weather is very hot. Close
the door as soon as possible to prevent cool air from escaping.
•Make sure that the cooler is sufficiently ventilated with adequate air
circulation.
Caution
Use extreme caution with children. The unit should not be
accessible to child's play.

15
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Troubleshooting
Fault indication
If a fault is detected, the display shows one of the following codes:
Caution
Do not try to repair your beer and beverage cooler yourself.
Doing so invalidates the warranty.
Fault code E1 E2
Description Temperature sensor fault Defroster sensor fault
Note
When the above faults are displayed, do not attempt to repair
the cooler by yourself. Please contact customer service for help.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The beer and beverage
cooler does not operate
The beer and beverage cooler
is unplugged.
Make sure that the beer and beverage cooler is plugged in and
that the plug is pushed completely into the outlet.
The fuse on the circuit is blown
or the circuit breaker is
tripped.
Check the house fuse/circuit breaker box and replace the fuse or
reset the circuit breaker.
Power failure. If a power failure occurs, the beer and beverage cooler turns off.
Wait until the power is restored, then turn it on again.
The cooler door does
not close completely
The shelf is out of position. Adjust the shelf properly.
The door gaskets are dirty. Clean the door gaskets.
The cooler is not level. Level the cooler with the leveling feet.
The cooler is not cold
enough
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
You have just added a large
amount of warm beverage to
the cooler.
Allow time for the new beverage to cool, then check again.
The temperature control is set
too warm.
Set the control to a colder setting.

16
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
The beer and beverage
cooler makes unusual
noises or vibrates
The cooler is not level. Level the beer and beverage cooler with the leveling feet.
The body of the beer and
beverage cooler is touching a
wall.
Move the beer and beverage cooler out from the wall.
• A rattling noise may be
heard. This is caused by the
flow of refrigerent in the
beer and beverage cooler.
• As each cooling cycle ends,
you may hear gurgling
sounds.
• Contraction and expansion
of the inside walls may
cause popping or crackling
noises.
This is normal.
Moisture is building up
in the interior of the
cooler
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The cooler is in a location that
is very humid.
Move the cooler to a dryer location.
The cooler turns on and
off frequently
The room temperature is
hotter than normal.
Cool the room or move your beer and beverage cooler to a
cooler place.
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The door gaskets do not seal
properly.
Clean the door gaskets.
The temperature control is set
too warm.
Set the control to a colder setting.
The humidity level in
your cooler is too low
The door has been opened too
often or was not closed
properly.
Make sure that the door is closed properly.
The cooler is in a location that
is too hot.
Move the cooler to a cooler location.
Relative humidity is too low. Place a cup of water inside the cooler to raise the humidity.
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION

17
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
Specifications
Dimensions (WxHxD) 48 can -18.9 × 17.3 × 19.4 in. (48 × 44 × 49.2 cm)
78 can -18.9 × 17.3 × 25.3 in. (48 × 44 × 64.2 cm)
115 can -18.9 × 17.3 × 33.1 in. (48 × 44 × 84.2 cm)
Weight 48 can - 50.7 lbs (23 kg)
78 can - 59.5 lbs (27 kg)
115 can - 70.5 lbs (32 kg)
Power requirements 48 can--115V~60Hz-65W
78 can--115V~60Hz-65W
115 can--115V~60Hz-80W
Current 48 can--0.8A
78 can--0.8A
115 can--1.1A
Operating temperature 34-50° F

18
NS-BC48SS7/NS-BC84SS7/NS-BC120SS7/ NS-BC120BS8
www.insigniaproducts.com
ONE-YEAR LIMITED WARRANTY
Definitions:
The Distributor* of Insignia branded products warrants to you, the original purchaser of this
new Insignia-branded product ("Product"), that the Product shall be free of defects in the
original manufacturer of the material or workmanship for a period of one (1) year from the
date of your purchase of the Product ("Warranty Period").
For this warranty to apply, your Product must be purchased in the United States or Canada
from a Best Buy branded retail store or online at www.bestbuy.com or www.bestbuy.ca and
is packaged with this warranty statement.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product.
Your purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of
the Product is determined to be defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or
(2) replace the Product at no charge with new or rebuilt comparable products or parts.
Products and parts replaced under this warranty become the property of Insignia and are
not returned to you. If service of Products or parts are required after the Warranty Period
expires, you must pay all labor and parts charges. This warranty lasts as long as you own your
Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or
otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a Best Buy retail store location or from a Best Buy online
website (www.bestbuy.com or www.bestbuy.ca), please take your original receipt and the
Product to any Best Buy store. Make sure that you place the Product in its original packaging
or packaging that provides the same amount of protection as the original packaging.
To obtain warranty service, in the United States call 1-888-BESTBUY or in Canada call
1-866-BESTBUY. Call agents may diagnose and correct the issue over the phone.
Where is the warranty valid?
This warranty is valid only in the United States and Canada at Best Buy branded retail stores
or websites to the original purchaser of the product in the county where the original
purchase was made.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction/education
•Installation
•Setupadjustments
• Cosmetic damage
• Damage due to weather, lightning, and other acts of God, such as power surges
• Accidental damage
•Misuse
•Abuse
•Negligence
• Commercial purposes/use, including but not limited to use in a place of business or in
communal areas of a multiple dwelling condominium or apartment complex, or
otherwise used in a place of other than a private home.

19
48-, 78-, 115-Can Beer and Beverage Cooler
www.insigniaproducts.com
• Modification of any part of the Product, including the antenna
• Display panel damaged by static (non-moving) images applied for lengthy periods
(burn-in).
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage or power supply
• Attempted repair by any person not authorized by Insignia to service the Product
• Products sold "as is" or "with all faults"
• Consumables, including but not limited to batteries (i.e. AA, AAA, C, etc.)
• Products where the factory applied serial number has been altered or removed
• Loss or Theft of this product or any part of the product
• Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly
illuminated) grouped in an area smaller than one tenth (1/10) of the display size or up
to five (5) pixel failures throughout the display. (Pixel based displays may contain a
limited number of pixels that may not function normally.)
• Failures or Damage caused by any contact including but not limited to liquids, gels or
pastes.
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY
FOR BREACH OF WARRANTY. INSIGNIA SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR
PRODUCT, LOST BUSINESS OR LOST PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND
NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY
PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Contact Insignia:
1-877-467-4289
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
*Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China

1-877-467-4289 (U.S. and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2018 Best Buy. All rights reserved.
Made in China
V4 ENGLISH
18-0579