Insignia NS-28ED200NA14 User manual

TM
CABLE
QUICK SETUP
GUIDE
28" LED TV /DVD COMBO
NS-28ED200NA14
Included accessories
Which cables do you have?
Your TV has several dierent jacks for connecting devices. For the
best video quality, use the best available connection. Use the cables
that came with your devices.
Note: You can use the HDMI 2/DVI jack to connect a DVI device to your TV. Attach an
HDMI-to-DVI adapter to the end of the HDMI cable. The adapter connects to the DVI
device’s jack. See your online User Guide for more information about HDMI/DVI devices.
Note: Images do not necessarily represent the exact design of your television.
Thank you
for purchasing this state-of-the-art
Insignia television. We hope you enjoy
the quality and reliability of this
television for years to come.
FIND YOUR
USER GUIDE ONLINE!
We are going green so a copy of your
User Guide is not provided in the box
but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product
Information, then click .
Features
Front view
Back view
OVER
VIDEO QUALITY
BEST
BETTER
GOOD
GOOD
HDMI video/audio
Component video and analog audio
Composite video and analog audio
Coaxial video/audio
JACK TYPE CABLE CONNECTOR
STOP!
Do not plug your
power cord in until all
other devices have
been connected. Multi-purpose jacks: You can plug
any device that uses HDMI into the any
HDMI jack. However, DVI devices must
be connected to the HDMI 2/DVI jack.
See the instructions that came with
your DVI device for more information.
Note: The component video and AV
jacks are shared. This means you can
connect only one component video or
AV device at a time. We suggest using
HDMI if your device supports it.
Note: Connect the yellow video cable
connector to the green VIDEO/Y jack
on the back of your TV/DVD combo.
Using an HDMI cable (BEST)
Using component cables (BETTER)
- OR -
Using an AV cable
(GOOD)
How do I connect my TV to an antenna or cable wall jack?
Component cable option
AV cable option
MAKING CONNECTIONS
How do I watch TV (cable or satellite receiver) or connect a device such as a DVD or
Blu-ray Disc player, game console, or camcorder?
- OR -
How do I prepare my TV for wall mounting?
(not for use with a TV stand)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
A Carefully place your TV face-down on a cushioned, clean surface to protect the screen from damages and scratches,
then remove the 5 screws.
B Remove the stand column.
See the instructions that came with your wall mount for more information about how to correctly mount your TV.
START HERE
How do I attach the stand to my TV?
(not for wall mounting)
You’ll need: A Phillips screwdriver and a soft surface to lay the TV on.
ACarefully place your TV face-down on a cushioned, clean surface to protect the screen
from damages and scratches.
BSecure the TV stand to the TV with the four provided screws.
Remote control
and two AAA batteries
TV stand
B4 type (18mm length)
(4pcs.)
AUDIO/VIDEO
OUT
USB
HDMI 3
VIDEO / Y
/ AUDIO OUT
PBPR
L - AUDIO - R
AV IN COMPONENT IN
HDMI 3
AB
Power indicator
Remote control sensor
Front
TV DVD HDMI VIDEO
TV-MENU
INPUT
POWER
RECALL
DVD
HOME
CCD
MTS/SAP FAVORITE
ZOOM
PICTURE AUDIO SLEEP CH-LIST
MENU SETUP TOP
MENU
SUBTITLE
AUDIO
INFO*
NS-RC05A-13
B4 type (18mm length)(4pcs.)
EJECT
PC / DVI
AUDIO IN
AGVIVD/2IMDH1IMDH ANT / CABLE
USB
HDMI 3/ AUDIO
OUT
VIDEO / Y PBPR
L - AUDIO - R
AV IN COMPONENT IN
DIGITAL
OUTPUT
AB
PC / DVI
AUDIO IN
AGVIVD/2IMDH1IMDH ANT / CABLE
DIGITAL
OUTPUT
PC / DVI
AUDIO IN
A
GVI
V
D
/2
IM
DH
1
IMDH ANT / CABLE
DIGITAL
OUTPUT
PC / DVI
AUDIO IN
A
G
V
AN
T
/ CABLE
DIGI
T
AL
T
T
OUTPUT
Before using your new product, please read these instructions to prevent any damage.
Power connector
C
M
Y
CM
MY
CY
CMY
K
NS-28ED200NA14_12-1200_QSG_V2_EN_FINAL.ai 1 2/6/2013 9:55:41 AMNS-28ED200NA14_12-1200_QSG_V2_EN_FINAL.ai 1 2/6/2013 9:55:41 AM

V2 ENGLISH 12-1200
TM
MOVE SELECT
OK
ENTER
MENU
PREVIOUS
EXIT
EXIT
Set menu language to English, Français, or Español
TV SETUP
Choose Your Menu Language
Français
Español
English
4
28" LED TV /DVD COMBO IQUICK SETUP GUIDE I NS-28ED200NA14
One-year limited warranty
Visit www.insigniaproducts.com for details.
Need additional help?
See your online User Guide! This
comprehensive guide includes everything
from basic how-to steps to more advanced
features. A copy of your User Guide is not
provided in the box but is available online.
Go to www.insigniaproducts.com,
then click Support & Service. Enter your
model number in the box under Manual,
Firmware, Drivers & Product Information,
then click .
Check out our online community forum at
www.insigniaproducts.com for helpful
information from other Insignia TV owners.
We’re here for you
www.insigniaproducts.com
For customer service, call:
877-467-4289
(U.S./Canada markets)
INSIGNIA is a registered trademark of BBY Solutions, Inc.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC,
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2013 BBY Solutions, Inc.
All Rights Reserved
1-877-467-4289
www.insigniaproducts.com
Using digital audio
Using analog audio
Note: Refer to the instructions that came
with your speakers for more information.
Note: Refer to the instructions that came
with your speakers for more information.
I already have a universal remote control. How do I make it control this TV?
Using your remote control
The best time to turn on your TV is after you have attached the TV
stand or wall-mounted your TV and connected all devices.
1 Plug the AC power cord into a power outlet.
2Install the remote control batteries.
3Press (power) on your remote control.
4Follow the on-screen instructions.
UNIVERSAL REMOTE TV CODES
CABLE BOX, SATELLITE BOX, OR OTHER SET-TOP BOX
Cablevision 068, 069, 078, 096, 100, 164, 168, 229, 026
Charter 2002, 1204, 1423, 1517, 0171, 1963, 0463, 1463, 0842, 1326, 167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Comcast 10171, 11204, 11326, 11463, 11517, 11641, 11780, 11785, 11892, 11963, 12002
Cox 1326, 1463
Direct TV 10171, 11204, 11326, 11517, 11564, 11641, 11963, 12002
Dish Network 720
Time Warner 400, 450, 461, 456, 10463, 1463, 0463
Tivo 0091
Verizon 0198, 0490
One for All 0054
Philips 0198, 0490
RCA 135
Sony 068, 069, 078, 096
If you already have a universal remote control that you would like to program to work with your TV and don’t
want to use the included Insignia remote control, see the table for common codes.
CONNECTING AUDIO DEVICES
How do I connect my TV to external speakers?
SOUNDBAR
SOUNDBAR
- OR -
For an up-to-date list of codes for other
cable providers and universal remote brands,
scan this QR code or visit
www.insigniaproducts.com/remotecodes
TURNING ON MY TV
When can I turn on my TV?
UNIVERSAL REMOTE CONTROLS
AUDIO IN
DIGITAL
AUDIO IN
PC / DVI
AUDIO IN
AGVIV
D /
2 IMD
H
1I
MD
HANT / CABLE
DIGITAL
OUTPUT
NORMAL: Displays the original 4:3 aspect
ratio with vertical black bars on the left
and right sides of the screen.
ZOOM:
screen. The top and bottom of the image
may be cropped.
WIDE: Displays content recorded in a
16:9 (wide-screen) aspect ratio.
CINEMA: Stretches the image at the
edges, but keeps a clear image in the
center.
AUTO: Automatically adjusts the image
based on the screen size and the TV
program. Select this option if you are
uncertain which aspect ratio to choose.
Note: Auto is only available when Auto
Zoom in the CHANNELS menu is set to On.
What are my screen-size options?
USB
HDMI 3/ AUDIO
OUT
VIDEO / Y PBPR
L - AUDIO - R
AV IN COMPONENT IN
TV DVD HDMI VIDEO
TV-MENU
INPUT
POWER
RECALL
DVD
HOME
CCD MTS/SAP FAVORITE ZOOM
PICTURE AUDIO SLEEP CH-LIST
MENU SETUP TOP
MENU SUBTITLE
AUDIO
INFO*
NS-RC05A-13
Power
Turns your TV on or o.
Numbers
Enter channel numbers.
.
Enters a digital sub-channel
number (e.g. 4.1).
Volume
Changes the volume.
EXIT
Closes the on-screen menu.
ENTER
CCD
HOME
Opens the on-screen menu.
Quick Launch Inputs
Selects another source connected
to your TV.
Navigation buttons
Navigates in DVD playback.
PICTURE
Selects the video mode.
AUDIO
Selects the audio mode.
Menu
Opens the DVD menu.
Setup
Opens the DVD system setup.
MTS/SAP
Cycles through mono, stereo, and
secondary audio for analog programs.
Subtitle
Selects the DVD subtitle language.
TOP MENU
Opens the DVD title menu.
Audio
subject to availability from broadcaster.
RECALL
Returns to the previous channel.
Channel
Changes the TV channels.
MUTE
TV-MENU
Opens the on-screen menu.
Arrows
Navigate in on-screen menus.
FAVORITE
Opens the Favorite Channel List.
INFO
Opens a TV status banner.
INPUT
Opens the INPUT SOURCE list.
ZOOM/ASPECT
Changes how the picture displays
on the screen.
CH-LIST
Opens the channel list.
SLEEP
Sets the sleep timer.
TV
HDMI 1
HDMI 2
HDMI 3
VGA
DVD
Component/AV
USB(Photos)
INPUT SOURCE
Mutes the sound.
Note: Available aspect ratios may vary with remote control.
OK
ENTER
MENU EXIT
PICTURE AUDIO CHANNELS SETTINGS
Adjust settings to aect picture quality.
Picture
MOVE SELECT PREVIOUS EXIT
Picture Mode
Backlight
Brightness
Contrast
Tint
Energy Savings
39
50
52
75
0
50
Color
Sharpness
Advanced Video
C
M
Y
CM
MY
CY
CMY
K
NS-28ED200NA14_12-1200_QSG_V2_EN_FINAL.ai 2 2/6/2013 9:55:46 AMNS-28ED200NA14_12-1200_QSG_V2_EN_FINAL.ai 2 2/6/2013 9:55:46 AM